Pro Drywall Construction Crew with The Right Tools that GO FAST!

Pro Drywall Construction Crew has got to gear up with the right tools for the job to not only go faster but make it easier on the body. We got to Tradetools' my favourite local tool store, to buy a load of tools to start a new business. This business you need more than just drywall tools, NEW video coming soon!
/ maxkilptyltd
Full Series - • Fastest Drywall Crew i...
See if you can guess. Which construction related business?
&
Whats your favorite cordless tool/skin in your trade? - Mine is the Makita 18V Drywall Cut Out Saw - • Makita 18V Drywall Cut...
Subscribe goo.gl/dDcLgJ
/ maxkil2
drywall hang cut router saw cut out screwgun drill screw install fix tape drywall taping,tools,fast,repair,mud,crack,hole,wall,plaster,mudding,joint,compound,joint compound,diy finish,topping,paper tape,gypsum,corner,trowel,knife,drywall finishing,plastering,taper,skim,coat,fastest,drywall construction crew working fast,maxkil,drywall hanging makita makita drywall screw gun makita 18v,diy drywall,drywall crew,pro drywall hanging,construction crew
If your a professional and your business provides this service in your local area, wherever you are in the world, I invite you to add your skill set to a listing on my website global.maxkil....

[@davidh7300]

I'm a carpenter that hangs drywall once a blue moon maybe on a rainy day. Just watching you guys for 5 minutes will help me up my game. First off I mark both sides of the piece to verify square. I think I will keep that habit I get paid well but don't have to fly like you guys, just hustle a little. Yeah a drywall crew would fire me.

[@AnthonyBarnett-ez3ni]

Longest sheets of drywall I've ever seen in my life

[@Maxkil]

hell yeah!, its thin though. dont be fooled we are not that strong

[@GigaChad-lr2gx]

How long are they? 16ft?

[@Jabberwok28]

I was going to say, are they like 3/8”?

[@atedinahalf6288]

​@@Jabberwok28It's probably a half inch.

[@bigears4014]

​@ated1inahalf6288 10mm 6m

[@SaerTurner-wn2qh]

Every Drywaller and boarder Gets my Respect over 40 years in the trades and Drywall well its takes a special bread I hate it can do it but no ..So my Respect boys

[@MattMc365]

Wild lookin studs . I’ve been framing metal for over 20 yrs , mostly piece work . That framing looks a bit different than here in the US. :)

[@harryhoudini2645]

Why are you leaving gap at top and seeing board on floor. We always went tight to ceiling and left gap at floor

[@Josh_D03]

We d the same thing in the states on commercial buildings. Metal flexes so we put in plastic made for that so the rock doesn't crack. Basically an expansion joint

[@BENABARE]

I know that in Australia they use cornice which covers that gap

[@dragonf1092]

Yep the floor trim covers the gap.

[@dragonf1092]

I wouldn't hire these guys to sheetrock anything.

[@DomesticDave]

No insulation or sound proofing???????

[@kerryklopfstein4260]

I hung drywall for 17 years, I wish this light weight stuff was available in my day. Well done guys.

[@chriscrowell-lv7wm]

those gentlemen are mechanics not just hangers and yes when i was hanging in the glory days it wasnt as easy

[@macduff14]

I used to carry 2 x 12.5 up apartment stairs .... on own . I would fit 60 sheets a day . 12.5mm. I'm 60 now . I got one metal hip at 50 year old . And the other one is on its way.

[@شربلمانزا]

Watching these guys motivate me to perfect my Drywall jobs. Job well done with precision.

[@skliros9235]

Are these cheap homes you're working on? With the metal studs, thin drywall, and no insulation, sound must travel across the house with ease.

[@arod6789]

Who insulates an interior wall?

[@craigpalmer256467]

@@arod6789 pretty much every country besides Australia

[@jonathoncarranza4414]

@@craigpalmer256467 alot of interior wall are not insulated in homes it's just the exterior for heat amd cold

[@whoobie2008]

I noticed there are no electrical boxes.

[@arod6789]

@@craigpalmer256467 haven't seen any and I'm in the US

[@ryszardslaw6656]

Panowie walicie taki przekret ze az brak słów Gdzie wygłuszenie i przeciw skraplanie poddasza .To jest nabicie klienta na kasę. KIPSKA FIRMA

[@smellygoatacres]

As a former painter, a good drywall crew is important. Paint can cover a lot of crap and caulk can make a poor trim job look decent but bad drywall is impossible to pretty up.

[@Maxkil]

yeah mate I agree

[@MAGAMAN]

This is why I am replacing all the drywall in me house.

[@midwest_nikk2682]

Any good finisher can hide the dry walkers mistakes.

[@ignatiustremor]

Respect to the guys, but why work faster when you're paid by the hour and wasting your health away?

[@Maxkil]

We aren't paid by the hour, by the meter

[@geneo1976]

Are you leaving out where you cut out where the receptacles are in the rooms? NEC code spec are supposed to be every 12' around a room. I didn't see anything exposed. I didn't see any switches either. I have done my share of sheetrock work over the years. Great job, just asking.

[@Maxkil]

The electrician does that and they are all marked out prior to sheeting and get pulled through later

[@afridgetoofar1818]

I always use screws when I hang drywall. Takes a little longer, but much less likely to pop over time.

[@fredsavage4925]

Sometimes you pay for a man's expertise, sometimes for his tools. You get both with this crew. Top dollar for top work is where it's at.

[@MatejVelican]

Soooo much waste........

[@jasonalba7679]

Never seen sheet that long.good job guys.

[@harryhoudini2645]

14 footers probably hung many of them you can also get 54"instead of standard 48" for 9 foot ceilings

[@Josh_D03]

Might even be 16' I've hung many over the years

[@82acresfarm]

​@harryhoudini2645 20ft sheets 3/8" standard in australia

[@kasteelvannieuwland8875]

No insulation in the wall? Gonna be a noizy house...

[@ianreiner1586]

na all ya need to be a good drywaller is a sleeveless Iron Maiden shirt and some acid Rock.... I am a Carpenter btw

[@Maxkil]

Iron maiden. Hell yeah, with rips in it.

[@kelvindawe5123]

Fast work chaps god nows where you get sheets that length but most amazingly you must have the only makita screw guns that don't constantly jam up my 2 drive me mantal keep it up chaps.

[@82acresfarm]

I thought the same about the makita but all the drywall crews in australia seem to use them exclusively

[@edwinwise6751]

Been in construction most of my life as a contractor, these guys are the real deal. I wish my crews had been 1/2 this fast

[@Dubyea]

Yea no kidding. The large boards not joints… most crews would take them 15 20 mins to do that wall

[@michelchartrand7257]

Chances are that they are making much more though.

[@ianreiner1586]

they would have been faster if 3 out of 3 all had tattoos then they work harder too not pay their rent and work for another paint on their body. lol

[@greggumbs1935]

Dude really... Try walling a real house.... Anybody could board with 14 foot sheets 7 foot ceilings And straight metal stud walls

[@Maxkil]

Subscribe goo.gl/dDcLgJ instagram.com/maxkil2/

[@adrewfis925]

But what does it say? “The word is near you, in your mouth and in your heart” (that is, the word of faith which we preach): 9 that if you confess with your mouth the Lord Yeshua ישוע (Jesus) and believe in your heart that God has raised Him from the dead, you will be saved. 10 For with the heart one believes unto righteousness, and with the mouth confession is made unto salvation. 11 For the Scripture says, “Whoever believes on Him will not be put to shame.” 12 For there is no distinction between Jew and Greek, for the same Lord over all is rich to all who call upon Him. 13 For “whoever calls on the name of the YHVH יהוה (LORD) shall be saved.” Romans 10:1-13

[@lewisriggs6596]

These guys are good but why gaps at the too

[@scouseaussie1638]

Crown moulding goes there

[@topsyball1049]

Weird..drywall not stacked on the wall, cutting it on the floor. Metal studs in a home.? Walls to not go all way to the ceiling. Is this professional.

[@Maxkil]

They stack plasterboard on the floor for safety reasons as well not put the weight of the stack on the walls, I suppose.

[@tvpi-z1v]

thats a good crew, finish at 12 down too the local :)

[@WarrenKelly-fq9ro]

What's with the huge gap in the top angle? I see boarders starting on the top sheet first then lower, a huge amount of boarders never take into account of how a taper would do his job without unnecessary butt joints,screw nibs not recessed.

[@billmulkins3217]

Never seen sheet rock that long.

[@LEK-we2hh]

You just did 🤭

[@82acresfarm]

Its standard size in Australia

[@thegrantdanielsband]

Top gap is ridiculous way too much mud to fill those gaps come on??? Cracking for sure!! and waste of mud wow 🙂

[@ryszardslaw6656]

Panowie walicie taki przekret ze az brak słów Gdzie wygłuszenie i przeciw skraplanie poddasza .To jest nabicie klienta na kasę. KIPSKA FIRMA

[@ryszardslaw6656]

Panowie walicie taki przekret ze az brak słów Gdzie wygłuszenie i przeciw skraplanie poddasza .To jest nabicie klienta na kasę. KIPSKA FIRMA

[@ryszardslaw6656]

Panowie walicie taki przekret ze az brak słów Gdzie wygłuszenie i przeciw skraplanie poddasza .To jest nabicie klienta na kasę. KIPSKA FIRMA

[@danielrutigliano7938]

3/8 inch...for ceilings maybe. Those walls are paper thin.

[@frostbite1991]

lived in a crappy house with walls that thin. Made many repairs when moving out. Just a minor bump between the studs would break it. Awful stuff. New house has 1" thick walls, a bit overkill but it was built to last over a century.

[@rodgerrabbit2955]

No, they will crippled in their late 30s early 40s....

[@breeze787]

Are these guys always in the zone? They seem so content.

[@kamelraja4062]

I would like to work woth you i have a 5 yeras experience about it iam here in east london

[@markhodges1276]

Why do builds in Aus not often use interior wall insulation? Are they just being cheap?

[@Maxkil]

Yes they are being cheap

[@vangogh1588]

I dunno.. Maybe so that if you fart on one room people in the other don't hear it?

[@smellygoatacres]

No reason to insulate interior walls. Duh

[@markhodges1276]

@h2s142 For sound primarily, but also thermal. If you have a multizone ducted AC system, especially using newer tech with individual zone temperature settings, you can close doors to unused zones and have less thermal transfer, more efficient cooling/heating. But yeah the main reason is sound. It's very commonplace in most other parts of the world to have internal wall insulation, but Australia is so far behind the game with insulating buildings in general. We may not get the same cold weather as the northern hemisphere, but we get extreme heat. We still have new builds with 4mm glass, and limited wall insulation FFS

[@markhodges1276]

@@smellygoatacres see above

[@gypboardframer]

This video has to be fake, no one speaking Spanish

[@galegregory97comcast]

These guys right here Mexican put it up as fast as the other guys can tape it off what you think

[@nickoregan7308]

??? How long is that board

[@dismaldog]

6m-(20ft)

[@edmarcarlos6332]

Vcs trabalham muito estão de parabéns pelo serviço... Brasil...

[@WarrenKelly-fq9ro]

Faster is not always better.

[@darenrrful]

why dont you put the drywall all the way up

[@markhodges1276]

Cornice (coving) closes the gap. Leaving a gap makes it much easier to hang. If they were going to tape and mud the corners then for sure they would hang a tighter fit.

[@Maxkil]

@markhodges1276 yeah mate, we put the bottom sheet on a block of plasterboard then sit the next one on it. Cornice finishes the top

[@dubiousdistinction6500]

1 5/8 steel studs in a house?

[@MrThrock09]

Whoever said these people will be in wheelchairs by the time they’re 50 you’re completely clueless. I’m one of those guys I’m now 66 years old and can run circles around most 40 year olds. These bastards are tougher than nails when you say work smart what the hell does that even mean apparently you haven’t been a pieceworker before. these guys probably show up just as it’s getting daylight and they probably go home by 2:30 3 o’clock in the summertime so they can play with their families and they were made $300 $400 for the day.

[@Maxkil]

Thanks mate! You need to give us some tips!!

[@GabrielDwight-j4v]

Kling Islands

[@1mandrywallarmytv144]

apparently they do not believe in butt joints. lol those sheet are loooooong,

[@michaelfahandez5042]

Good job guys how long r those drywall? I love mudding

[@Maxkil]

6meters man, I love mudding as well. Everyone does I think 👍

[@markhodges1276]

@@Maxkil I want to love it, but as a DIYer I just don't get enough reps. I spend more time swearing than mudding.

[@dmitripogosian5084]

@@markhodges1276 As a DIYer, I hate mudding, painting, tiling etc. Much prefer screwing, nailing and assembling in general :)

[@markhodges1276]

@@dmitripogosian5084 yeah any finishing trades are rough. They require technique which only comes from practice and repetition. I'll probably annoy a few chippys with this comment but framing just requires building code knowledge, the ability to measure and the right tools. Much more fun.

[@dmitripogosian5084]

@@markhodges1276 Yep, that's why I always feel that plumbers, electricians, installers etc overcharge, while finishers ? I just bow and ready to pay anything they ask :)

[@sharkcity6607]

Bro I’m a 3rd period apprentice in local 9144 San Jose. And I don’t even use that square to cut it. That’s wasting time. Not hating but out here you’ll get smoked

[@jordanholmes4052]

Wow I've never seen sheets this long🤣 what are these weighing in at? I've just invested in one off them cutters that your using too trim round the doors on this video recently, it's fair too say they are quicker than a jab saw🤣 save a lot off time when trimming around sockets etc. Top job boys👌🏻

[@mattheweggers8345]

No there men im59 been do stuff like that for 40 yrs still walkin upright

[@davidmcpherson730]

They’d work faster with music. Drywall 101

[@dangelomack1]

What are the tools being used?

[@Maxkil]

Makita collated screw guns

[@williamrobinson8867]

That is half inch rock u wont hang five eights that fast

[@Maxkil]

For sure, this is 10mm thick, Its pretty light

[@randallfrank5682]

Impressive sheetrock handling.

[@beenschmokin]

Professionals. But... it's Easier when the walls are straight.

[@gordonclark7632]

Now that is efficiency. Is the guy doing the cutting called the 'cut guy' like the framers use?

[@noelnichols3554]

What ya gona do with that crack at the top? I hung rock for 40 + years, commercial and residential. Commercial starts at the bottom and residential starts at the top. I they would have pushed the top wall piece up to the ceiling there wouldn't be a crack, and the finisher 's job would be a lot easer...

[@Maxkil]

It gets cornice, otherwise they would need to get wider board

[@82acresfarm]

Australia has cornice everywhere as standard

[@ELPeeDubYou]

Try that with 5/8" 😂 JK...thats how it done, son!

[@starkfairchild260]

What’s the fucking machine is in the beginning of the video

[@stevedunahugh2203]

Laying board down on metal studs, not pros

[@lucianosantosgoncalves6129]

trabalhando desse jeito acredito que tem dinheiro que nem ladrão da conta.kkk

[@zachwagner1838]

Just curious about popped screws. Work behind guys with screw guns, and always have pops to deal with

[@Ketchupbelongsonsteak]

Installed wrong . Nothing to do with them being screws.

[@zachwagner1838]

@@Ketchupbelongsonsteak no shit!?. It was more or less about using the guns with bands, and just pumping and dumping… why I said, what about popped screws. Pump and dump, leave it for the finisher. Not my first day

[@Ketchupbelongsonsteak]

@@zachwagner1838 I hate those guns. My shoulder can't push them.

[@zachwagner1838]

@@Ketchupbelongsonsteak most of the hangers we work around nail the perimeter, screw off the field. Problem we come across is they don’t have the depth set right, pump and dump, and leave us with the mess. They use screw guns, but they aren’t the decking screw guns. That’s why I said, what do they do about popped screws. No good with the OG if not set, what about the decking screw gun? Even worse for wear

[@Ketchupbelongsonsteak]

@@zachwagner1838 when I started we nailed perimeters. Now I never use nails but I glue when I can. Vapor barrier obviously not gluing there. The paper on the face of drywall is so thin these days it is hard to get screws that don't pop through but it is still possible guys just need to pay attention more. I'm still on the fence for cordless guns. I feel to often when I'm finishing I'm turning those in 1/8-1/4 turn before the sheet is actually tight and doesn't move when pushed on. I love gluing because less screws and in the case a screw does break paper the sheet still doesn't move so it's not coming back as a pop later.

[@pinecone9045]

3/8"

[@kurtzcol]

those neck tattoos and crack dont pay for themselves

[@ACDC940]

Fukin easy with one cut per wall. Try this on a reno

[@adi-d5902]

What’s with the gaps at the top, curious

[@stephenc4161]

cornice

[@HARRYYZ125]

But what if customer at a later date doesnt want coving..thats shocking you dont care. Amateur at best .

[@markhodges1276]

@@HARRYYZ125 If you pull cornice anyway your going to need to hang new sheet. The cornice cement will take a good chunk out of the sheet on both wall and ceiling. Decision to use/not use coving would only be made on new build or major reno.

[@willj8610]

Yep that was a huge Milwaukee tool haul, pity every tool on site is Makita

[@LearningOfOld]

That’s the longest sheets of drywall I’ve seen

[@drakerrules3513]

My 3 man crew does over 10k sqf a day

[@EmilioGarcia-fr5po]

Why the gap at ceiling joint sssss?

[@blastmasterparker6358]

Used to run 2miles 530 am lift wieghts then lay hi density block all day or concrete

[@Mael_GomM]

What’s the drill holder you guys use?

[@MjJones2020]

"Pro"... and they don't hang from Ceiling down? Nice gap at the top. Ooof. Us Cleveland boys would smoke em.

[@Maxkil]

Let's see

[@dangtran_decoration]

happy day verry nice

[@Maxkil]

Thanks you too. I want to go to Vietnam, I come work with you a few days

[@JoeBaugh-v9o]

These guys are for real!🔥💯💯

[@MattMc365]

Piece work , grab it and growl .

[@mikescaffo4850]

He'll no but they are great workers

[@Chelovek_s_Divana]

шумоизоляция в сделку не входила

[@markcook8451]

There only staking rock anybody can do that. I can see daylight in the top angles that's not right .I'm a professional for 50 years .l still work

[@erikcable1755]

you have been dumb for 50 years as well

[@039raymond]

no soundinsulation between the drywall??

[@williamrobinson8867]

I been doing it 51 years u earn your money people in offices should never complain

[@Maxkil]

Hey William, for sure. Its not easy but wouldn't want to work in an office too! 51 years that's awesome.. you would have seen some things. I would love to hear some stories

[@jackoneil4164]

What are those shoes covers called?

[@Bryanvaughn-s4t]

Swisted showed up to the party

[@robertbutler8004]

That can't be in Australia because they did not use stud adhesive on the studs before fixing the sheeting!

[@Maxkil]

Yeah we did

[@lucianosantosgoncalves6129]

isso aí é aonde ?

[@wolololer]

Australia

[@chenlee3240]

100 times faster then me but mine is better, I like it tight against the ceiling it helps support the edges of the lid.

[@Maxkil]

Yeah we have a cornice that goes up for that., if you want it tight here you would need to buy a wider sheet and cut every sheet down

[@dragonf1092]

Where the hell did they learn to hang Sheetrock big gap between the ceiling and the wall.

[@xander1756]

55 or 90mm Cornice covers the gap. Where did you gain your Sheetrock knowledge from?

[@hhusain88]

rebull can at 4:26 is still there when they put the drywall at 6:56. lol enjoy the ants 🤣

[@Maxkil]

We eat ants here in Australia

[@honemorrison4013]

white guys? what's going on here

[@Poddaszaszpachlowanie]

Good job. Pozdrawiam z Polski.

[@erasamus1057]

in my neck these guys get paid by the sheet, not the hour so it literally pays to be fast. not sure how it works there

[@Maxkil]

yeah its by the meter, and in this case, the workers all have a share of the money, so everyone has an incentive to be productive

[@caminhoneiroborbainternaci816]

Love drywall

[@kombaster9398]

I love too....but to looking only.Bad memories from Vienna Austria.The serbian guy never paid me for the months as drywall worker.But one polish guy stole all of his tools because the serbian didn't paid to him two weeks for the plastering.

[@Ryan-yb3bf]

Dude has some SICK tattoos.

[@scherm5514]

Gotta love Australia. 20 foot boards. Cornice everywhere.

[@Maxkil]

Yeah, the sheets are thinner to elsewhere you know. Only 10mm walls 🫣

[@82acresfarm]

​@@Maxkil you can get 10 mm in europe as well but 12.5 is the most common. Soundproofing is more common too. I did a job where all the internal walls were sound deadened and double hung first layer with moisture resistant and second with knauf purple board. That stuff is heavy and rediculously hard to cut. Also need special screws to fix it, found that out through trial and error mostly error😅. Great watching you guys work though learnt a heap. Miss the 6m sheets everything is 2.5-3m max here.

[@WickedLobstah978]

All can hang by themselves and are fast. Ive been hanging over 20 years. Ive never seen framing like that though. Its nice to get a square open layout like that. Pretty fast with those screw guns you guys use. Couldnt pay me enough to run those but I gotta give you credit for the speed with them. I could definitely work with these guys, but not running that monstrosity of a gun lol. Hand fed screwing is the best and fastest (for me). Good work though guys!

[@joshmanning3865]

Boss level shit 🔥

[@Suarez.24]

How long is that board?? 4,80 meters¿?

[@Maxkil]

Our sheets come in 6.00 meters or 236.22 ″ for you Americans

[@Suarez.24]

In arg. We only have sheets of 1.20 x 2.40 meters generally (standard). It is difficult to work with sheets of that size (6 meters), since they are not found in the market in our country. Thanks for the answer @@Maxkil