Maytag 3000 Series Washing Machine Water Valve Replacement And More

[@tichu7]

Although I had a different problem from yours, the bonus footage of cleaning out the drain pump is what ultimately was what I was looking for. Thanks!

[@shelfcompact]

Replaced mine thanks to this video! Thanks!

[@MADHIKER777]

Extremely clear and useful video!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ricardocorleone6963]

Thank you very much for this video! This was a huge help in repairing my washer.

[@Mrtfarrugia]

My wife likes to leave the door open so im currently learning how to change the valve while drying out my laundry room. Thank fully its a straight shot to the floor drain.

[@personalchefcorey456]

Great video man great video. Thank you so much!

[@mamadog4632]

Awesome! Followed it to a ‘t’ and it went swimmingly.

[@litlewolf2]

Ours is not fully spinning the clothes dry and there is water coming from the bottom some place. Would that be the valve or maybe the pump or do you is it that filter on the bottom that's clogged? I'll try and pull it tomorrow and see, but any advice would be helpful. Great video, very informative, thanks! keep up the good work.

[@TheGAutomotiveAndMore]

Yes check the filter first. Then look for the leak. If the pump is leaking replace it and see if that takes care of your problem.

[@litlewolf2]

@@TheGAutomotiveAndMore I cleaned the filter and no more water underneath, thanks for that! However just before I did that, it started blowing the GFCI started tripping just before hand. After I cleaned the filter the GFCI is still tripping after every like 3 loads. The washer is the only thing plugged into it and it never tripped in the years before it started a few days ago. Suggestions? Thanks again for the help, much appreciated! I suggest you include like 'filter cleaning' in the title of your video, might pull in some more views. I didn't even know it had one before I saw this.

[@TheGAutomotiveAndMore]

@@litlewolf2 There could be something wrong with the washing machine or your GFCI is going bad. I seen the GFCI go bad after years of use. I would replace the GFCI first because they are cheap and easy to replace. Thanks for watching

[@johnnybell7927]

Great video, what does E1f1 error mean??

[@TheGAutomotiveAndMore]

The F1 E1 alert indicates there is an issue with the appliance control unit or associated wiring. Power unit down by turning off the circuit breaker or unplugging for one (1) minute. Power unit up by reconnecting power. Restart a new cycle. Monitor the washer for one (1) minute to ensure the error code does not display again.

[@earthlycolorbrown6246]

Good fellow cleaned and repaired unit! Now Sears is down nationwide and water hose is dripping water so turned it off and unplugged gf front loader from wall until warranty can come fix it.

[@TheGAutomotiveAndMore]

😥

[@sraes4337]

Where did you purchase this replacement solenoid valve? I believe I need to replace mine. My washer has malfunctioned just as yours did.

[@TheGAutomotiveAndMore]

I need one fast so in my area there is a company called Tribles. They sell parts for appliances. But you can get them on Ebay. Thanks for watching

[@amyhartgrove8324]

Curious if this is the reason I am getting an F20 error. Any tips on that? Sincerely, A desperate momma who needs to do laundry ;)

[@TheGAutomotiveAndMore]

Not sure. I have had that code before I just unpluged it to reset it and it work again.

[@TheJake1356]

How to reset machine after replacing door lock ????

[@TheGAutomotiveAndMore]

Did you unplug the machine? That usually does it but not 100% sure

[@RonGallardo777]

How long you had them I’m looking for a used one

[@TheGAutomotiveAndMore]

We got them in January 2010. Thanks for watching

[@Minenehermosom]

Can you stack them together?

[@TheGAutomotiveAndMore]

Yes you can, dryer on top but there is a stacking kit number 8212640. Thanks for watching.

[@Minenehermosom]

The G Automotive And More thank you for replying

[@raulsolano2925]

What was happening to the washing machine that cause you to replace this? I know you said it was filling with water but did it cause excessive water draining?

[@TheGAutomotiveAndMore]

The machine had water haft way up the door glass. It did pump it out but the machine seamed to run much longer.

[@raulsolano2925]

@@TheGAutomotiveAndMore did you ever experience a situation when there was so much water draining that the drain in the wall backed up?

[@TheGAutomotiveAndMore]

No, sounds like your drain tube is not far enough in or the drain is clogged up.

[@silverfox401]

Where did you buy the new part at ? Part #

[@TheGAutomotiveAndMore]

I got this part at a local appliance place. But you can get them from Ebay or on line. I found my part number on line. Thanks for watching

[@danfernandez252]

@@TheGAutomotiveAndMore can you please share the part number?

[@TheGAutomotiveAndMore]

@@danfernandez252 I don't put part numbers up because there are several parts numbers. You need to go and google your machine to find the right one for your machine. Thanks for watching

[@TheFluffyRealtor]

Thank you for posting this, anyway you could help me out with an F28 code?

[@TheGAutomotiveAndMore]

Sorry have not seen that yet in my machine. I would google it. Thanks for watching

[@carmac1652]

Hi did you find out what f28 code is .I have the same problem thanks 👍🇨🇦

[@brendacarrillo237]

What does code F30 mean

[@TheGAutomotiveAndMore]

I would Google it. I do not have the code list. I think it should be it the paper work that's inside the machine.

[@raulsalinas9093]

El reset de esa lavadora

[@TheGAutomotiveAndMore]

Unplug it I guess.