Maytag bravos diagnostic test on mod

I was seein if all things function but my prob is it dont test y mine wont go beyond sensing cycle test dont tell me nothing but hope someone has an idea for me as for test hope it helps ppl to check theres

[@agrant256]

I love you. Thank you for this!

[@diegohernandez4046]

Thank you very much bud , finally get my washer fix , 🙂 thank you so much

[@megan1205]

Ty! Mine isn't draining or spinning. Never even knew there was a diagnostic test to run lol

[@JesusGirl____________0]

Thank you!!

[@amyadam5776]

What does it mean when diag test stops on wash rinse spin & the #14

[@andytwerie2253]

I had same problem and believe it or not after putting in diagnostics and running complete cycle test it started working as designed again

[@leroydalton173]

Old style speed queen!

[@vernonfreeman4160]

Thank you!!!!

[@tk0145]

Hi, thanks for posting this video. How do you get the codes back after the diagnostic? Where can I find a code legend?

[@mscott3309]

mines started messing up and I replaced the shift actuator . I cleared the codes and recalibrated and it started working again. a few days later it stopped mid cycle and the lid light started flashing along with the lid lock making a clicking. I pulled the codes F5 E1, F5,E3. I read that them codes were dealing with the lid lock assembly , so I replaced the it and the machine is still not working and the lid lock is still clicking . Someone suggested it might be my control board . By the time it said and done I will have basically a new washer with all these of pieces and parts I been replacing. My next step is taking a sledgehammer to this piece of maytag bravos crap

[@sheamckenzie]

How did you pull codes? I ran the diagnostic but cannot figure out how to pull codes

[@boodro-kh4kf]

Does anyone know how to disable the chimes/sounds? I hate the beeps and chimes this machine makes. Any ideas?

[@mayrahernandez7433]

What if you do those steps and itdoesn’t do anything it just flash the wash machine light

[@edvail522]

What if at end of cycle , clothes wet, no water in drum it shows ol on screen?

[@MDR-hn2yz]

I’m having the same problem. Any ideas?

[@maximboulanger1990]

It means overload

[@AgonCholakian]

Just replaced the lid lock switch ran this and I still don't know what to do....lid lock stays engaged after turning the power off and I have to unplug it

[@quickestturtlez5362]

d1001more try changing the shift actuator. It could also be the board but not likely.

[@javyr]

@@quickestturtlez5362 did this ever get resolved? I have the same problem and was about to change the lock but I read somewhere else that it could be the actuator so I wanna confirm if this was indeed the problem in your case. Thanks!

[@quickestturtlez5362]

@@javyr The error codes for the 2 are different, i would check the service manual that came with your washer to confirm which is which. Otherwise you have a 50/50 chance of guessing

[@sabreleshay2010]

The lid lock on mine stays on all the time too and I would have to unplug, plug it back in multiple times before I could get the cycle to start. Now it won't work at all and when it's plugged in the lid lock light stays on. Can anyone point me to what could be wrong?

[@quickestturtlez5362]

@@sabreleshay2010 Either the shift actuator or the lid lock. Go to a youtube channel called "Lorain Furniture and Appliance" . They have a video showing you how to put the washer in test mode. It's very straight forward.

[@reddexwashington4509]

Mine did everything yours did at the same time. Still nothing.

[@dominailtion]

Is the pump dieing

[@nellyhdez7443]

Esta es la lavadora que no sale agua fría, me interesa saber 🤔 En español

[@sparkleinyoureyes8259]

Where is video part 2...part 1 isn't working for me.

[@icewolf74m]

It's out😊 0:53

[@rebeccathacker81]

Mine goes threw all the cycles then stops, the lid lock starts flashing. All while wash, rinse, and spin are lit....... 😭

[@leannedennis6228]

Rebecca fu mine does the SAME exact thing but can’t figure out what any of that means.......if you have figured it out at all, please let me know. I’m going insane trying to fix it

[@chelseee8035]

One to right three to left one to right one to left

[@karinagutierrez2094]

Hi my washer machen only lock and unlock no more functions

[@JoseRamirez-lg8hv]

Did u figure out problem

[@roxybarone]

file:///C:/Users/trevon/Downloads/W10240504%20Maytag%20Bravos%20MVWX600XW0%20MCT%20Washer%20Tech%20Sheet.pdf

[@NezzoFTW]

My lid lock will keep locking, it will lock 3 times and then the light will keep flashing

[@javyr]

Did you ever get this fixed? In having the same issue

[@jimmiesams4901]

Mine is doing the same I need help

[@mscott3309]

Jimmie Sams mines as well . I replaced the lid lock unit and it’s still doing it

[@Sdart0828]

Scott mine doing exact same after changing it