Maytag, Kenmore, WhirlPool Clicking Lock Fix

UNPLUG YOUR WASHER FIRST!!! Click "Show More" for more details!
Is your washer broken? Not completing its cycles due to a repeated clicking noise? Its probably the locking mechanism that is broken. This is the information / video you can't find anywhere else, I looked.
Don't order a new lock for $60 and have a technician replace it. Fix it yourself!
Tools needed:
1/4 inch socket or flathead
Small flathead to pry open case to lock
Some tape
Hex screwdriver if you want to take off the latch and affix it permanently (highly recommended).
The fix is just removing the metal clip/tab that becomes detached and then making sure all the other parts are attached correctly. In my case the metal tab and plastic piece were both detached. I removed the metal tab and reattached everything as shown. Now the washer/lock is fixed, and goes through all cycles thinking its locked when it actually is not locked.
This is for part w10838613. www.appliancepartspros.com/whi...
My particular washer is the Kenmore 100 Series he or High Efficiency
Here are some high quality images as well.
imgur.com/a/HvDaC
Watch this video to see how to take off the top of the washer.
• Whirlpool Top-Load Was...
Please let me know if you have any questions.

[@danh413]

Update: I had to replace the lock on June 2nd 2017. The Copper part found in the video at 4:10 broke. The copper wire became unraveled and I was unable to fix it. I searched ebay for the part number w10838613, and found it for $40. After replacing the lock I had to do this: Plugin the washer. Immediately put the lid latch in the lock hole and then take it out 6 times in 12 seconds Then leave the latch in on the 7th time. Then position the settings dial to Rinse/Spin and run a Rinse/Spin. This reset the lock mechanism or the computer and it started working normally. Before this the lights were just off and it wouldn't work. I now have the latch permanently in lock and can lift the lid while the washer is in use. Sorry the original fix I posted only worked for about 10 months for me and the 2 other guys that use the washer. I posted this video a couple months after I had fixed it. ALSO this was commented by Roop about a year ago and you may find it helpful! 👇👇👇👇👇 👇👇👇👇👇 "This video itself did not work for my wtw5000dw2 with a flashing lock light, but it did help me fix it: At 4:10 in this video, directly left of the solenoid (copper part) you see an angled piece of metal. This is part of a mechanism that detects the door being closed. The white plastic which pushes on this switch mechanism was broken in my washer. If I manually move the broken piece of plastic I can see it causes two pieces of metal to touch. What I did was forced this switch closed, by forcing the two pieces of metal touch. This fixed my lock light flashing. Right after this I was able to use this washer again. kzbin.info/www/bejne/lX_CinaJg9-cjsU has a video of the manual which was also very helpful."

[@iriscaldentey]

In the video we want the latch permanently in lock anyhow right? Does that mean little black plastic thingy up or down?

[@josephhsia]

I'm having trouble just removing the lock device. Was wondering if you would know what i'm doing wrong. I tried doing exactly as you did in the video, but it wouldn't budge. Model: amana, ntw4605ew0

[@rashdudeman9567]

Ol’ faithful. I broke the child lock years ago and had to refer to this video. Today, the tiny “paper clip” had become unaligned not allowing the mechanism to work. Quick reference to this video once again got me up and washing.

[@BeautifulMind15]

I'm watching this video 6 years later and you absolutely saved my husband and I so much money. Thank you so much. May God Bless you abundantly!!

[@nospam3409]

I have a BSME in mechanical engineering. I've been designing, building, specing, and servicing automated equipment for over 2 decades. I program in over 25 different control languages. I'm the guy maintenance calls when nobody else can fix it, but I'll be darned if I could get this stink'n switch to work!!! Pain in the rear to get that darn spring put back in when you didn't see how it came apart. Then I watch this vid. As soon as you said to get rid of the spring, I could have kicked myself. Works like a champ now. Thanks!!!! I'll be sharing this video every time I get the chance!!!

[@masterblaster9123]

I have a big hotdog 🌭

[@DjPorkchop73]

6 years later and I found this video and tried the fix out and it works like a charm. Saved me a few dollars today. Thanks!

[@johnmoss2674]

You sir, are amazing. Simple fix that worked, clear instructions. With a screwdriver and 7mm wrench I took the mounting screws off(on my amana washer, could be different on someone else's), took the metal clip out of the housing with pliers and replaced everything. In short, in worked, and I really needed this win. Thank you.

[@orramaster]

You rock! We followed your steps and we fixed our lock and even bypassed the lock on our kenmore 300! Saving us a good $150 at least! It took us a while but we watched over and over until we got it. It worked, thank you so so much!!!!!!!!!!!!!!!!

[@stephaniececrle5185]

This does not work if there is corrosion on any of the main terminals. The metal that connects to the main wires. Other than that fact and the 90’s type wobble with the filming. This was still the most helpful after 15 other videos and I was fortunate to drain and spin out the cycle of needed towels. Have to get a new lock mechanism set because of the stupid corrosion. That being said. Props dude. And thank you.

[@jasonnance1440]

Oh jeez. Let me tell you. My power has been out for 4 days, and with 4 kids... laundry pile is SKY HIGH. We finally got the power back on today and the washer had started the Clicking of Doom. Thanks to you, good sir, a few hours later and I'm back in business. It ain't pretty, but she's chugging along! Thank you from the very depths of my heart.

[@bellajewell]

Thank you SO much! I broke our washing machine earlier today and didn't want to have to tell my husband! I was able to fix it myself after watching your video. Great tip about the towel.

[@danh413]

I'm glad it helped! Granted the fix may only work for about a year, as I did eventually have to replace the part. If it does come to that I have an updated comment on this video explaining how to reset the washer after replacing it.

[@blomberg1986]

Thank you for this! Helped me fix my washer in minutes but what i took from this video most was the towel trick. GAME CHANGER!

[@Bun_andpip]

Thank you, you beautiful stranger! It seriously took me more time watching this video a couple of times to catch all the important stuff than it did to actually fix it.

[@INFVMOUS502]

Saved me! Washer is only a year and a half old and just didn't turn on one day, no lights or anything. Model wtw4816fw2. Unplugged the lock wires from the board and gave me the slack to pull out the lock from inside, then pulled the metal clip. Took a couple times of putting it back in to get it work work, but your picture of it let me know how to put the tiny pieces back together! Thanks Dan!

[@modklv126]

It was a little tough to figure out what pieces go where to reassemble, but after about 20 min of tinkering I got it and it's working flawlessly, thank you so much. My problem started when I pulled up on my locked lid due to a lop sided load in the spin cycle, you saved me a lot of $ and only caused a slight headache 🙃🤣🤣 again, THANK YOU!!!!

[@markerdmann9790]

Brilliant! I did this on my Maytag Centennial and although the plastic lock case looked different, the little metal spring I removed looked exactly like the one in your video. The only difficulty I had was reassembling the whole mechanism because when I took the plastic cover off, all the pieces flew out before I had a chance to see how they were put together. Took a minute to figure it out, but apparently I did it right because now the washer is working. The best part is that now the lid no longer locks and I can open the $#%&* lid whenever I want to!

[@nate162ismyname5]

Heck yeah!

[@colleenwillard5385]

Did you know for sure the lock was doing it? Mine won't start any cycle but the lock keeps clicking in and out when you try to start a cycle. Is this what yours did?

[@1XERGAMiNG]

​@@colleenwillard5385 mine is going it was well same brand. I'm assuming the lock just took a crap

[@DKDreamKeeper]

Spent alot of time searching, reading and watching videos. None of it helped till I found this. You really helped me. Thank you

[@taylorn8432]

It worked for my whirlpool washer. (I found new lock on Ebay for $19) however I thought I'd try doing this, i just removed the clip you spoke of. It Worked perfect. Took me about 10 mins.. worth trying if your lock mechanism is malfunctioning. Thank You!

[@Trueillusions1]

Thank you! Thank you! Thank you! People like you make a huge difference in the lives of people who are just trying to make it paycheck to paycheck. Right now is the worst time in years for me to have a major appliance break and you made it so this little thing didn't break us in a fragile time. I hope you get some good karma for the help you give to people.

[@SkilledCoconut]

Worked perfectly after removing the clip. I spent hours trying to fix the clicking noise until I watched your video. Thank you!!

[@duhwut]

I fixed this issue for my Amana washer model: NTW4516FW2 but I did it a little differently. In this video he talks about removing the metal clip but I just removed the plastic piece he fidgets with at 5:00 on instead. When putting it back together I made sure the metal switch wasn't in the contact position. The lock light came on then it actually started spinning for the first time (just bought it) when I tested it in "drain/spin" mode. One thing to note is that the red and white wires in my model were opposite of where they were in this video (not sure if that matters). My lock light wasn't coming on at all but now it does. Thanks Dan H for showing the world what to do!

[@danh413]

Glad there was an alternate way to fix it, thanks for sharing!

[@ericwolf839]

Dude you are a genius. Don’t know how you figured this out, but mine is purring like a kitten. Thanks a lot bro. Half hour fix.

[@troypirt3864]

This sure does work 100%. My washer wouldn't go into spin cycle. and after watching this video and doing what he says to do it worked 100%. I'm back to washing clothes without having to spend any money. Thank you so much I now follow this channel for more tips.

[@davidlewis3433]

I watched this and had mine fixed 10 minutes later. Machine was brand new, had never done a complete cycle before now. Thanks!

[@joshuatree206]

My niece decided to hide in my washer for hide and seek. It locked her in and she panicked. I wasn't exactly gentle with the washer when I was getting her out. So thank you for such an informative and easy to follow guide on fixing the damn thing. Saved me a few bucks that I don't have.

[@stephens1118]

Same thing my son did with his friends, and it locked on him my son ripped it open so we bought the whole lock replacement but it's still clicking....🤔 so I wonder if I have to replace the clip that's on the door when you raise it up. It's the part that closes into the lock on the bottom portion of the washer.... Anyone have any ideas?

[@qwencyvalentino5567]

Best Video on KZbin thank you man spent 15 hours at this washer and spent bunch on money only this fixed it

[@ChrisRobba]

Glad I found it in the first hour but I’ve felt that pain on other issues 😂

[@RingoYote]

YOU ARE A LIFESAVER!!!! i just did this trick skeptical it would work...It runs right up! thank you..you just saved me $300

[@salemstales]

You're a genius. My washer lock actually is broken for good but this helped me make sure and showed me how to install the new one when I get it 👍

[@KaylaAnderkin]

Thank you so much for sharing this. I found it when looking on Google on how to fix this washing machine I just got for $25. I got it & the dryer for $50, & if it wasn't for this video I wouldn't have even known where to begin. I'd probably ordered the part & installed it.. Thanks again!

[@suec.5840]

You really are a lifesaver, You helped me fix the problem without having a repairman in during this epidemic. (My immune system is in worse shape than my washer) Thank you so much!

[@danh413]

Awesome so happy you were able to fix it! You're welcome, take care!

[@ZerosofEM]

Thank you kindly for sharing your knowledge on this. The lid lock (on my Maytag Bravos MCT MVWX655DW1) would only click, click, click and not allow the rinse cycle to begin. Meanwhile my heap of soggy clothes sat in the washer tub. Removing that clip worked perfectly, as you said it would, and for nothing but time I was able to solve my problem, as well as the dreaded lock altogether. Thank you so much!

[@yatesmckenzie3962]

This worked well for me and, as advertised, kept me from having to buy a new lock. Thanks so much!

[@baldr46]

My latch got stuck and would not release the lid. I had to force it open to get my clothes out and then the machine stopped draining. Followed the video and now it's working again. Thanks so much!!!

[@Mex1go]

Totally worked on a whirpool. I appreciate you! You saved me 60 bucks. Glad I came across your video.

[@zeredbaroness]

Thank you! Worked on a whirlpool and saved me the cost of a replacement as well as the headache of having the stupid lock mechanism again!

[@the-horse-girl]

Thank you! This was the only video I found that worked. You could’ve showed the removal of the clip better but overall this was what I needed.

[@TheMngy99]

I"m still trying to figure out how to take out the clip. How did you figure it out?

[@caseyclark7667]

@@TheMngy99 pry it out with a pick

[@auntpatty]

Well I'll be an s.o.b. I had a problem with the door lock on my Amana washer which seems to have the exact same door lock that you download in your video I followed your instructions to the letter although I didn't have to disassemble that unit the clip fell out without doing that. So I carefully put it back together and position and clipped it back in place and it works perfectly. Thank you very much!

[@jessicabartlett4907]

YOU ROCK!! THANK U! This video not only helped me be able to complete a full cycle with my washer... But soo glad u had the diagram of the inside of that dang switch... Because yah once I popped that housing off ... Had no clue how the hell to put that lil plastic mechanism back .. 😂❤🎉

[@k.c.6233]

Thank You! I was just about to give up and buy a new one. Works perfect now

[@tyroney2]

Just a couple comments to add. First, my “locking mechanism” broke because I was impatient with the washer and opened the lid too early. This is really easy to do-so be careful because it results in this clstrfk of a mess. First thing of note, with this fix implemented, the washer’s lid will still trigger the safety shutdown. As far as I can tell, there’s no operational difference. Second, it seems two variables are key in order for this to work. The first is to get that long silver V/shaped piece of metal out of the locking contraption. It came out of mine before opening the cover to the unit-but I believe you’ll still want to open that cover anyway because of variable two. The second essential part is to make sure the rotating latch, shown at 4:43 results in closing the circuit (i.e. the small lever is in the lowest connecting position). This should mean a “turn” to the left. *When your washer broke, it might’ve not left the rotating lever in the connecting position-so this is why I think you need to open the crappy black plastic box. (I think the towel is a good idea-this cheap mechanism can be put back together quite easy should it sort of fall apart.) Lastly, when looking down on this component (as seen in 4:43) there appear to be two places that form a complete circuit for electricity to travel through. As mentioned above, you rotate the pin so that the right side connects-but on the left side (where the push of a lever connects the circuit) don’t worry about it. The latch (that almost surely is still connected to the lid of the washing machine) will force that circuit closed when you shut the lid. So, make sure those two variables above are correct, and when you put it all back together it should work. As an aside, my parents got a set of Maytag washer and driers when they were married. They lasted for over 30 years without any problems. The “Maytag” version of this washer looks like it couldn’t have had one more penny cut out of its materials and manufacture. Sad to see this garbage build quality with the Maytag name on it now. 🤷‍♂️

[@danh413]

You can remove the latch from the top of the door and put it in the latch hole so you can lift the door while its operating.

[@dasaauto2024]

Dan H Thanks! I might do that. After fixing the latch mechanism the first time (following your instructions) the washer was basically dead the next time I went to use it (my roommate had used it last, so I had no idea what could’ve happened to kill the washer). I tried the reset code that you can find on KZbin (start at 12 o’clock, turn left one, right 3, left one, right one) to enter the service menu. A hour of dking around got me nowhere. So, reluctantly, I took the whole thing apart again to look at the latch assembly. When I opened it up, it looked like the “U” shaped metal arm had somehow come out of the piston (?) part of the solenoid. I was able to delicately reassemble it thanks to your closeup look at the whole mechanism, as well as you demonstrating how it worked. I put it back together absolutely not expecting it work, since logically it didn’t seem like I’d done anything to affect the circuit, and it had been completely non responsive. But, praise be, it actually started working again. *I don’t know if this made a difference, but I did perform the “reset” via the service menu, and also, before trying to starting the machine for the first time, I held in the “start” button before plugging the washer into the wall-and I kept the button pressed after plugging it in for about 20 seconds. The door light flashed red, and it *appeared* like *maybe* something had been reset. I don’t know. My roommate is a five foot delicate Mexican girl, and she manhandles everything in the house while cursing in up a storm in Spanish. I don’t understand her, or this f-ing washing machine, but thanks again for providing the only helpful video on KZbin for this insane (and apparently common) problem. If you add a patreon link or some other type of electronic payment link in your description (maybe add a pop-up box at the end of your video too) I’d be more than happy to throw a donation your way. You definitely deserve it. Thank you!

[@nickb5417]

Vital info… Thanks so much for pointing this out! I took off the lid lock assembly, (black case) and opened it, took out the metal V. And put it back together. And it wouldn’t function at all and I panicked. Lol I didn’t know to check the rotary thing (to make sure there electrical contact on right side… Thank you thank u thank u!!!

[@robertmanley7556]

OH MY GOD DUDE YOU ARE THE MAN !!! This totally saved my butt washing machine broke last night I couldn't figure it out found this video had it fixed in 10 minutes you are a lifesaver thank you so much !

[@willassmaximus]

Thank you! I almost threw my washer through the wall before i watched this.

[@connerruss6012]

Would splicing the red and blue wire just make it work im asking because I feel that would be easier

[@salemstales]

If my washer had a neck i was ready to wring it

[@Screwpipe669]

So far so good!! You saved me from buying a new washer! Things been going strong for 8 years and I really don’t want to buy a new one so very happy with this fix!

[@BanditRider86]

So u just did what he did in the video and put it together? Mine still just clicks like before

[@achleec]

Omg thank you soo much for this video. My washer stopped locking last night and wouldn’t work. I did everything you said and now it’s working. 😁 saved me money and an argument.

[@danh413]

"and an argument" ROFL glad to help!

[@Yordoom]

Thank You!! I was pulling my hair out over this issue. I did what you showed in your video and IT Worked!!!!

[@DrGoldenFlap]

Thank god for your video even 6 years later still helping people!!

[@UbberMapper]

I had to watch this about 5 times so Your video could be better informationally but i do thank you regardless. It was a big help and i was able to repair my machine. Thumbs Up.

[@ShepardThomas]

7 years later and this video still comes in clutch. We can now have clean clothes!

[@jessicarichards6796]

It worked! Thanks a bunch. My machine is a roper and it worked like a charm. A little tricky to put the lock mechanism back together. But we got it in the end!

[@marvin10987654321]

Thank you! This was really helpful, I just finished fixing mine, works with no problems

[@gmj1660]

Great video. I broke the lid switch on my washer when I was trying to open the lid by force. I wasn't patient enough to wait for the washer to stop spinning completely. Anyway, followed this video to remove the metal clip (and a tiny broken plastic part), assembled back and the washer was working again. Thanks. I was planning, alternatively, if this method didn't work I would just bypass the switch.

[@docgray5004]

I wish you would have bypassed it and shared how. I don't know which wires of the red white and blue

[@Pedro-rj1iu]

@@docgray5004 I’ve been trying to bypass and I genuinely don’t think it’s possible

[@docgray5004]

@@Pedro-rj1iu I pulled the switch to be accessible whole in operation and manually fiddled with it during washes but just went ahead and got a different washer.

[@Crazy07J]

Thanks for your time, I lost the spring thinking I didn’t need it but now o can’t get it to work. Going to try to take the mechanism apart again and put it back together.

[@fozjared]

This video saved my marriage!!! Just kidding, we divorced anyway… but my washer works again! Thanks Dr Phil! 😂

[@ericaalexander2913]

Thanks a lot you have saved us another trip to the wash house this video made us save a whole lot of money on getting a mechanic and I am a woman which makes it feels even better since these kinds of repairs are mostly done by men. 😁

[@gajes957]

Thank you so much.. Your video is a life saver.. I was about ditch my washer as I couldn’t find lid lock replacement to buy anywhere.

[@desoman72]

OMG! That worked 100%! I had to buy the replacement part because the inside got corroded but when I installed the new part, it didn't work. After I took out that clip and reinstalled the lid lock, it worked. Thanks!

[@brianbuck2693]

Thanks so much! Just pulled the little stainless clip and voilà it works. About 10 minutes total.

[@cagman7388]

I dont know who you are.. But thank you! I dont know how the hell you figured that out.. But you're a genius in my book!!!

[@keithrushmore9809]

Thanks for this video. I'm usually not a do it yourselfer, but you made it really easy!

[@SuperGokuSon]

Yes your video totally fix my washing machine thank you so much these are the videos that truly make KZbin worth it.

[@girlsandgunz8]

Thank you so much !!! You saved me $1,085.18. I was going to buy a new wash machine but with your help, I just replaced the lid lock for $29.21. I was going to shell out $1,114.41 for a new Speed Queen TC5000WN. Thanks again !

[@danh413]

That is awesome! Glad I could help you out!

[@SVT_LIGHTNING]

First try didn’t work for me. So I took it apart again and took everything out this time and redid everything and now it works perfectly. Thanks!

[@geecee3784]

worked like a charm, ABOUT 5 MINUTES OF WORK! THANK YOU!!!!

[@altamoss9844]

God bless you!!!!! I was so stressed out about this but was able to fix it myself with your video. I really appreciate it.

[@latoyagraham1025]

Alta Moss Really it looks so damn hard. I’ve watched this video so many times

[@hulk01921]

Here i am 1:00am just fixed my machine. Based on views and likes i believe this video saved more then $millions$ for all here. This is the power of distributed information

[@roxanotte]

Oh my jesus lord thank you so much as of today today, i did it, and it worked !!! Awsome vid thanks!

[@Nsixtyfourlink]

Even if this works as a bypass for a while. It saved me so I can save up for a new washer, instead of wasting money at the laundry Matt.

[@davidsaenz9706]

Thanks bud. You made look good with my wife. Didn't tell her about your video.

[@orramaster]

🤣🤣🤣

[@kennethdante]

they legit make these so a human needs three people to take this little thing apart... 6 plastic tension clips. Incredible.

[@peterwalker5980]

Not sure what i was doing but just followed your instructions and it actually worked :). Thank you so much.

[@danielleleighty7980]

Thank you! Thank you!! After cursing and kicking the washer for a while I found your video. Was skeptical but did as you said and it works great again. Can not thank you enough!!

[@danh413]

Wooooooooooooooo!!!!!! You're welcome glad that helped!!

[@srmohammed1202]

Thanks man, I didnt use this fix but you gave me an idea where I used a magnet and a hair tie...needless to say 60 bucks plus tech fee would've added up to about 5-6 mths of detergent for me..God bless my man.

[@danh413]

Sounds like some Macgyver engineering. Lol that is amazing

[@johnbischoff5862]

My latch broke in a different place but this still fixed it!! Thanks! $100 saved!

[@sidbowman9169]

Worked on my kenmore series 100. Thanks for making video saved me a good amount of money

[@scottytoohottie7172]

Just want to say thank you very much it worked 100% and I'll never have to fix that problem again really appreciate your video in your help

[@savannahporter89]

Going to attempt this tonight. My washer just keeps clicking and won't lock! Can't get anything done and I almost bought a whole new locking mechanism. Hoping this works and my boyfriend is impressed with me 😂

[@P-willie]

This really helped me I followed step by step like you said you just need to remove that metal clip put everything back and your good to go I really appreciate you making this video I subscribed I can’t wait to see more helpful videos again thank you very much stay awesome brother!!! 🌊🔥⚔️🛡️

[@davidreed970]

You just saved me a butt load of money. Thank you!

[@cristanelson1069]

Awesome fix!! Thank you very much...works like a charm!!

[@ReadySetJoe321]

Between this and a few other videos, I was able to fix my machine. Thanks for the hack; I don't know if I'd have found this information elsewhere.

[@Hazardous4200]

This saved me from spending more money on these cheap ass parts!!! Then they wanted 80.00 bucks for a new one!!!! Thanks.

[@Bryanc-nq8bs]

Just wanted to say thank you for the video my washer now works like it use too thank you so much

[@irkalla100]

You are a lifesaver. Thank you for this video!

[@1JennC1]

Thank you!! SO much easier and safer than messing with rewiring around the problem. And to not have it lock now... ahhhhh.....joy.

[@nospam3409]

Problem is that with this switch, you can't wire around it. The control board wants to see the signal turn on and off as the solenoid engages and disengages so it knows when it's broken.

[@SaltyVibrations]

Saved my but on this one. Thanks for posting bud

[@stevenhoyt1918]

Worked for me!! Thanks! New mechanism on the way but was able to so our clothes until it comes in!

[@jonnakwilliams3689]

How do I take out the metal pin? In the video at 3:40 where your thumb is I have a white clip with a lock on it. How can I take it off? Thanks.

[@travisthompson7506]

So since the lock doesn't work but the washer does what happens when I open it when it's running does it just stop or does it keep going

[@joannehoelscher113]

Help! how do you get the v shaped piece out? The video skips to just showing it out already.

[@colincarswell1502]

This was super helpful and thorough. It helped me in a tight pinch with my washer. 5 out of 5 from me

[@HornOfGoat33]

Nice! it worked for me. Took about 30min. Thank you!

[@RaltsGuardian]

You are a legend! I cannot stress enough how much you helped me, if I could pay you I would, thank you so many lifetimes over good sir you are doing a world of a difference here on your very informative channel

[@danh413]

You're welcome glad to help and try to make a small difference!

[@charmainewilliams9435]

Thanks man. I’ve been fighting with my washer for two days. Not sure what made it lock in the lock position but after removing the click , it’s running

[@ChrisRobba]

3:20 I just took out the black plastic piece below the red wire so the metal would stay touching. Now the lid thinks it’s always locked. I was a little worried about safety but if you lift the lid the washer stops at least on my model. This video pointed me in the right direction

[@mr.henderson3395]

So does this bypass the lock and start cycles? Also, I noticed on the black lid lock the spring was so damaged this is where I think the fatal flaw is.

[@scottguimaraes7284]

Worked perfectly! Thank you so much for your help!

[@kimberlyvanwyk8720]

Just used this fix! It works!! Thank you!

[@lachinaaliaslauyuyuysantos8703]

Do I suppose to break the plastic on top of the metal piece? O how do I take it out?

[@vladscorchus]

There is a place in Heaven for you! Thank you for saving me money and stress!

[@DrJekyll51]

Dude you're a wizard, that stupid metal prong bit seems to have been the problem, thanks

[@richardzeleznok6113]

Thank you for this video it saved me hundreds!!