Maytech Efoil motor 65162 Direct Drive First test 120mm prop

Prototype2
100 kv Inrunner Motor
virus coupon discount kit eFoil Maytech code: usd10off
virus cupón de descuento para kit eFoil Maytech código: usd10off
michobby.com/collections/all-...
virus coupon discount motor Maytech 65162 code: usd10off
virus cupón de descuento para motor Maytech 65162 código usd10off
michobby.com/collections/all-...
virus coupon 10% discount RESIN PRO code: virus
virus cupon para productos RESIN PRO, 10% descuento código: virus
resinpro.es/product-category/...
12s 16Ah Tattu lipo battery
Maytech waterproof remote
DIY Carbon fiber Efoil
Data
6,39km
max speed 29 km/h
22, 31min ride time
max current 118A
Max power 5031,5 W
Max temp 35 C
max throttle 94%
--------------
Sabon Beach

[@owenmorgan5398]

what you looking at speed wise? Nice carbon prop too

[@someguyontheinternet-]

Shaaarrrrrrrrrrrrk!!!!!!!

[@popeye7833]

About the Surf where to buy it without Eparts please

[@DavidKaden369]

What is your power consumption on cruise speed? If you ride 23 min on that battery it is about 2000W or?

[@zachtews]

I bought the Maytech efoil kit in 2020 and it turned out to be garbage. The motor was fine (although the propeller they send you is way too big) but the controller is absolute trash. I hooked up a 14S battery (well within specs) and the result was not enough speed to foil followed by the motor burning out (ruined) within 5 minutes. Got a new motor, same result. Of course Maytech doesn’t honor their warranty. I switched over to a Flipsky system and after some programming issues got it working great. I’d say avoid Maytech!

[@angryman3603]

This is the "wastewater" from the refinery ... I hope it is a little bit cleaned . Repsol ?

[@DIYjetboards]

Hey Virus looks like a good setup for people who don’t have access to shop equipment to make waterproof cans etc. if it came with a nose cone and clamp to attach it to a mast I think they would sell a lot of motors. I’d buy one in a heartbeat for that alone cause it’s the only piece I don’t have for my next build. Also why did you ditch the prop shroud? Also I know you made that carbon fiber prop ( sweet) but what pitch is it and is there an off the shelf prop I can buy cause I don’t have the 3D printer to make one. Thanks man Frankie

[@virus_virus]

Hi Frank, how are you, friend? The engine is 100% waterproof, nose and back, okay? It is very easy to make a cone and a clamp and install it on a mast. I think you should buy a cheap 3d printer and print these parts. Thanks !!

[@DIYjetboards]

virus You are probably right I should just suck it up and get a 3D printer. What about the prop though.? Is there an off the shelf prop I can use or do I have to print one ? Was the shroud around the prop causing a lot of drag? I lost a fight with a prop a few years ago and I have the scars to prove it so I like the shroud/duct around the prop unless it causes more problems than it solves. Thanks again for your advice and videos bro. Cheers Frankie

[@mantasmartinkus6412]

@@virus_virus can you share your prop stl for 3d print it ?

[@bengoldnz]

Hola Virus, genial, me encanta. Que piensas de este motor? Te gusta más que el 56104 con reisenauer? Gracias

[@virus_virus]

Hola Ben! entiendo que quieres decir el 5870 de tp power con reisenauer, es el otro efoil que tengo y es una bestia! no puedo pasar del 70% de acelerador. La verdad me gusta este motor por lo simple y facil de montar, cualquiera puede hacer ya un efoil sin esfuerzo, para surfear olas que es lo que yo hago en este momento va perfecto, incluso me sobra potencia, es por eso que mi ultimo 4070 y reisenauer puede ser una buena combinacion tambien. Me resulta muy agradable lo poco ruidoso navegando y en definitiva calidad precio y montaje es lo mejor que veo actualmente. Realmente me gusta pero todavía tengo que probarlo mas. Gracias

[@michaelvadney5803]

Hey Virus. Back at more development I see. How to you compare this to your handmade machined casings? Do you like this solution better? Is it sealed better? Durable? Thanks, Mike

[@virus_virus]

Hello Michael, good question, its too soon to know if this motor is very well sealed and durable, but its very easy to build, everyone can make an efoil ! just need to install a propeller and is a cheap system, Quality / price I think is the best option. But my geared system is more powerful than this one, sometimes the power is not the most important, it depends your application. My best propulsion should be the thin and lightweight and less power motor / gearbox that I could build for surfing. But if you want to make a simple efoil with good efficiency for freeride, this Maytech direct motor is perfect. I hope you understand my explanation, thanks

[@michaelvadney5803]

@@virus_virus That does make sense, thanks. Did the motor and gearbox feel very hot when you finished? I like the throttle control and the speed controller. I figure that more people will be producing solutions as it gains in popularity. Keep on tinkering with it Virus! Thanks again for the videos.

[@virus_virus]

​ Michael Vadney It's Direct motor no gearbox, the motor less hot than my geared propulsion, no problem in both systems! ESC a little hot but the water was hot in the river and the pump was very hot. Thanks friend!

[@miguelgonzalezormazabal5068]

Entonces para un uso normal es mejor el maytec , pero para un uso de olas y velocidad es mejor el tuyo porque tiene más potencia

[@virus_virus]

para olas es indiferente con el mando maytech puedes coger olas sin problema, en cuanto a potencia, si, el tp power son 14000w y este maytech son 5000w aunque sobre el agua el maytech corre de sobra, 35-40kmh

[@kristoufe]

there would not be a better performance if the propeller was sharp?

[@virus_virus]

problably yes, This is my first test, the next step! thanks

[@coollifesilva747]

Hola virus ... unas preguntillas ... sabrias responderme si le puedo acoplar un motor de esos a un kayak y si iría bien ? O que modelo de motor me recomienda y donde podria comprarlo un saludo y gracias de antemano

[@virus_virus]

Hola. Si. Pero piensa que no solo es el motor necesitas también espacio dentro del kayak para la electrónica que maneja el motor y espacio para la batería. Entra en la página dé Maytech que pongo en la descripción. Allí lo podrás comprar con tranquilidad. Hay kits de motor ESC y mando.

[@coollifesilva747]

@@virus_virus si virus mi intencion es comprar solo el motor... la bateria pondria otra cualkiera con mas capacidad pues la que trae solo tiene autonomia para 1 hora y con otra mas grande hasta 6 horas... tengo sitio sin problemas

[@coollifesilva747]

@@virus_virus por cierto en aliexpress esta mas barato el motor

[@pquispea]

Hola, que significa ese cupon descuento de la descripcion? Es solo para ti o lo puede usar cualquiera? Gracias

[@virus_virus]

Si son cupones descuento para distintos productos y los puedes usar. Por supuesto. 😊

[@ISSOU-if7df]

Bateries ?

[@virus_virus]

description

[@androyd965]

twice time maytech 65162 burned out... maytech does not recognise me any warranty

[@Alfredomaturi]

I deduce that Maytech is not a serious company!!!

[@Alfredomaturi]

so bad????

[@Alfredomaturi]

however I want to wait for a response from Virus

[@ISSOU-if7df]

autonomy batery ?

[@virus_virus]

40-50min 32Ah

[@ISSOU-if7df]

@@virus_virus okey no need for a reducer for the propeller ?

[@virus_virus]

@@ISSOU-if7df no, motor directo sin caja de cambios

[@ISSOU-if7df]

@@virus_virus okey and you get to have a lot of torque?

[@virus_virus]

@@ISSOU-if7df yes friend! it can lift 120kg

[@rhincodonefoil7797]

Is the river polluted?

[@virus_virus]

Hi Rhin, how are you? what about your efoil? no, it is warm water from a thermal plant, the plant take external cold water for cooling turbines and then eject this warm water in the river.

[@rhincodonefoil7797]

virus oh.I see.😄 Our efoil will be on the market soon

[@virus_virus]

@@rhincodonefoil7797 nice friend!

[@angryman3603]

A "thermal plant" :-) it is a refinery and the water is completely polluted ...

[@SpencerGaming7580]

Slow

[@virus_virus]

40km/h