Mazak Integrex J 200 -Drive Unit

[@Yotameni]

Why those CNCs are so mesmerizing? I just love it.

[@msattler111]

These CNC videos always amaze me.

[@loran7510]

56' 456 6tle9 7 e9 7 5r5cd42w 7 Yoplait

[@loran7510]

O8545 5i8

[@loran7510]

U hb 66 66

[@ballchrome1201]

Drill without chips, awesome😱

[@dortiz81706]

Chris Hart lol only a true Machinist find that funny 😆.

[@miperrosellamaleo]

In the two faces of course... I suppose that needs coolant and it's bad for the video.

[@skrubol]

Easier to control chatter with no chips..

[@judywinslow2219]

Awesome! I used to run an old CNC Swiss lathe with live tooling. This is kinda like that machine on STEROIDS! Only, the CNC Swiss was limited to 1/2 OD max bar stock. Well. . . I only said this was "kinda like" that one.

[@satyasinghgupta6064]

Good cnc machine works I'm fan all different types CNC machines

[@imamhosen7952]

Just Awesome working.... Machine..

[@MegaRich7]

Nice to watch the U drill going into an already drilled hole.

[@MrGazza11223344]

Richard Bautsch needs coolant obviously

[@velumanimani8542]

Hi I am from India, do you any idea to make business in Machining field contact me [phone]

[@oohookoo]

OMG I hate that shit too.. I see that and think to myself, "oh that didn't go so well" and despite Mazak thinking I'm completely retarded I know I'm not alone... Thank you #Richard Bautsch

[@ducktape5970]

I wish they could hire me to watch the robot do its job, I'd never complain.

[@benle2665]

If you go to vo-tec school for 6 months, learning how to read measurement instruments ,blue print and understand how to operate the machines, then many companies more than happy to hire you. They will start you out at least 14 per hour

[@foghornleghorn2445]

I do this every day. Boring as hell once set up is complete and program is proven. Then you're just a button pusher.

[@joserefaelarrietaferrer1531]

No dejo de maravillarme de esta preciosa Maquina ¡

[@rajanadeem3683]

ماشاءاللہ تبارک اللہ بہت ہی زبردست

[@stijndepuydt5644]

@ 8:21 byebye cutting angle on the U-Drill... Should have show it with chattering. Its no blame, its work in progress Milling speeds and feeds are verry nice :p.

[@fredrezfield1629]

what's the cutter /gear tooth milling used here? can you put a link?

[@Cancun771]

5:28 Faking it to avoid the screeching. No chips while "drilling", same as before on that same tool.

[@PeterUhrskovBerg]

I dont get why you follow the outer contour on the second part when milling the outer. Wouldn't it be quicker to mill them seperately, or is this with mazatrol?

[@tansit2344]

Looks like it was programmed as a full chain, not 3 partial. I'd expect to see a few more approach moves with Mazatrol stock and safety zones.

[@hitechshowroomvideos4557]

Hi Peter, The majority of the program was made using Mazatrol. the timing gear and engraving is ISO. We made one contour on this program. this part was to do customer demonstrations with. we though that to save time programming, one contour would be easier for the trainees. regards The Hi-Tech Team

[@stiwigonzales6035]

Betwen milled shape shuld be g0 code as we saw now was all the time g1

[@ภานุกรหัดทอง]

ราคากี่บาทคับ

[@aarifkhatri8501]

Very nice cnc machine job is easy work

[@MrVinicius343]

the rapids on the machine stop so violently it almost feels like its too much

[@danielramirezcruz.2209]

Fantástic machine I love it thanks..

[@aleksandrapajovic3722]

What is full name of this drive unit and where we use this mill-turn part?

[@chilamalasubbucnc]

Please make one video for how to operate machine How to on power How to take offsets How to call in midel of the program How to call macro

[@felixsentenz5605]

Nice video! Ever considered using hpc facemills for the outer planes? Would definitely save a lot of your time and look great even for videos. It would be appreciated to see some cutting informations like cutting depth and spindle speed for each tool. Nice work!

[@hitechshowroomvideos4557]

Hi Felix Sentenz, Thank you for the feedback. We shall start to use HPC Facemill on future parts. We are starting to make videos with depth of cut, ap, ae and the cutting data. If you send me your email address I will send you the cutting data we use for what tools. regards. The Hi-Tech Team

[@felixsentenz5605]

Sure mate - here you go: [e-mail] - thanks a lot !

[@fredrezfield1629]

@@hitechshowroomvideos4557 @ 9:00 is the chamfer tool spinning clockwise or counter clockwise?

[@billymann5325]

@@fredrezfield1629 Really????...WTF do you think!

[@dztube1997]

How much cost this machine ❤

[@sumitkumarsingh6450]

Good cnc machine work job

[@WarrenDJr]

A CNC machine is only as good as the programmers. Machines do what they are told to do. But before that can ever happen, it all starts out on a cad system. The engineer that's doing the drawing is the programmer

[@wrangler5729]

Warren T not

[@runejakobsen9958]

No way, the progammer is the poor operator trying to make all the stupid parts engineers/designers make.

[@Robert-mz7yr]

What happened with the u-drill? Did you pre-drilled it? Started to screaming, then cut and there is no swarf at all coming out.

[@hitechshowroomvideos4557]

Hi Robert, We started machining the material with the u-drill for 5mm deep. As the u-drill needs through-coolant to evacuate the chips we turned the coolant on and then redid the u-drill operation for the video and edited accordingly. regards The Hi-Tech Team

[@jakobv8]

Too bad about the U drill. I was looking forward to seeing it make some chips :-)

[@hitechshowroomvideos4557]

Hi jakobv8, If you see our other videos, the U-Drill machines the solid material. The U-Drill in this video needs coolant for chip evacuation.

[@okelloraymond2115]

exactly i think the drill was ready done with a coolant then later for the video they turned the coolant off

[@AnwarAnsari-vu9fu]

Great machine

[@cncit]

Hi, do you have any info on the timing gear cutter..looks like a sandvik tool?

[@hitechshowroomvideos4557]

Hi CNCIT, what information would you like? this tool is indeed a Sanvik tool. we also have the ISCAR model of this tool.

[@cncit]

Hitech ShowroomVideos Hi the make of the tool and part number would be fine. Thanks. John

[@cncit]

Hitech ShowroomVideos Thanks..I missed the last bit of your post I will check these cutters out :-) John

[@williamhuang5329]

Hanzhen harmonic drive gear , strain wave reducer, robot joint , over 30 years experience

[@abnerdutrajunior4931]

Muito top essas máquinas cnc ... 10

[@mecatech564]

kzbin.info/www/bejne/oqTVhaxsrttle5o

[@DanielMartinez-gb9pb]

Lo mejor en máquinas de metal mecánica

[@PappSaTT]

Welches Material habt Ihr da eigentlich benutzt ?

[@mecatech564]

Good job

[@m.j.khnowledge]

wow អស្ចារ្យមែនប្រូ​ មានរបៀបធ្វើprograme ជួយ shareផង

[@bigbob1699]

Great machine. I hope you train some young machinist to do it when HAL dies.

[@mostafamadht8270]

هل يوجد وظائف شاغرة في المصنع

[@ЯргубеХиймамов]

👍👍👍 Сколько стоит такой станок, хочу себе такой же

[@ЯргубеХиймамов]

И где можно приобрести, такой станок? Может кто в курсе?

[@ariseanbu1381]

Sandvik u-drill gonna empty pass😂

[@porkerthepig]

Arise Anbu they aren’t brave enough to send that in dry 😂 lol

[@jackwalton2789]

Yes

[@leosilva7624]

Legal c.n.c... tmj

[@ЮрийЗайцев-к1ч]

Даже при обработке алюминия, вы нарушаете правила ГОСТ... При соблюдении правил допусков и посадок НИКОГДА И НИЗАЧТО нельзя зажимать за зубья, резьбу и тому подобное...

[@19evgeniiRUS]

1:29 lol

[@Gausshunter]

need cooling

[@miperrosellamaleo]

Don't make chips, haha it's a magical drill xD

[@ffgg576]

very good

[@2megapixel948]

This machine write better than me

[@umamuruganumamurugan6529]

2 megapixel

[@adillachgar4513]

Hi 1:30 to 1:45 and 5:29 to 5:40 (new (drilling without burr))

[@dasage949395]

La macchina molto bella , a mio parere un po lento il cambio utensile ...

[@hitechshowroomvideos4557]

il toolchange potrebbe essere lenta, ma è meglio avere questo di avere più strumenti nella zona di lavorazione con interferenza come una torretta normale. quando il toolchanger ha 32 utensili o più. vi è un meccanismo differente che è più veloce. questa macchina ha solo lo standard 20 strumenti.

[@tommyzgb64]

Very nice

[@rogerreyes820]

2nd part will be fast if you cut Cutouts individual Waste of time profile the whole part Just and opinión

[@cadkilen8085]

you drive very grov

[@gustavochichero6806]

What Software Programing?

[@Rasmus661]

The engraving might have been made in a CAM program but the rest of the program has probably been made in the mazatrol software on the machine.

[@hitechshowroomvideos4557]

Hi Gustavo, We use Mazatrol to make the program for these basic parts. We made a basic g-code subprogram to do the timing gear. This was made by hand with no CAM. With regards to the engraving. We use a small computer program called DESKENGRAVE. It is a free download and can do line or arc engraving. This free software can only make XY co-ordinates. We use MasterCam, Edgecam, MazaCam or Inventor HSM Cam to do 3-5 axis contours or XC engraving. regards The Hi-Tech Team

[@9955CAM8]

it's great

[@mostafamadht8270]

فين المكان

[@ThomasCardif]

Ist ja ich nicht schlecht, aber das Fräsen dauert viel zu lange auf diese Art. HPC Fräser und die Taschen gleich komplett gefertigt in der Tiefe. Trochoidales fräsen.

[@hitechshowroomvideos4557]

Wir verwenden die einfache Fräsidee, um unseren Schülern zu zeigen, wie sie anfangen sollen. Wir würden gerne Full-Full-Fräsen, aber wir sind nicht unterrichtet CAD / CAM. Wir verwenden Mastercam für Dämonen. Wir haben noch keine pu diese videos auf.

[@ArdaTheGamer8159]

Hitech ShowroomVideos

[@chribo_h2941]

dachte ich mir auch so!

[@chribo_h2941]

Gefreut hat es mich aber das es ein starloch gibt ! ^^

[@خالدحمود-ت7ت]

اتمنا لو املك مثلها بس شكلها غاليه الثمن

[@uricasakysaric3170]

cheese

[@Danziman78]

Not going to be very accurate if you rough and finish while there was still all that meat on the 2nd end

[@jvcakai4903]

PERFECT

[@miperrosellamaleo]

Too slow the milling process, you lose a lot of time without machining.

[@timothysvec8568]

:-).......very nice!

[@deepugowda5181]

timothy svec Super

[@jubbaronny]

For those moaning about the u/drill cheat, pour milk into your eyes and you’ll have your answer.

[@milanmarkovic4348]

This is no possible is it

[@subhanahmad8986]

I have mazak integrek e-420

[@ПавелКарманов-ь3х]

Многовато лишних движений. Я бы на 10-15% сократил время на изготовление.

[@travistucker7317]

Right, well, how much does that cost? Oh, and we're only making 4, 5 if you don't scrap the first one.

[@EVPchannel-8899]

😎👍

[@FireGodSpeed]

That chattering ugh 😂

[@doright6461]

false hole? appreciate vid but where is the swarf? lol.

[@michaelkerry6163]

fooking hell cut down your lead in times

[@pfrillele]

Much missing

[@surfermx]

this thing is 100% flexible but it cant take serious cuts thats why there is chatter thats why the video is edited 5 times this machine is useless (except for shaft jobs)

[@wrangler5729]

claudia33 and you my friend are misinformed

[@runejakobsen9958]

Really? You know what you are talking about? This is a Integrex J-200, you should try the I-200 with Smooth-system.

[@ЮрийЗайцев-к1ч]

АГА Блять, а по титану слабо с такими режимами резиания да ко всему еще и без СОЖ.... Показуха одна.

[@sumitkumarsingh6450]

Good cnc machine work job