MAZDA 3 BRAKING SYSTEM MALFUNCTION

[@Srt8Jeep]

You’re like the only person on the planet making (modern) Mazda repair videos. You’re awesome for that. I have a 2022 Cx30 and just had the coolant valve thingy replaced like you had in your videos. P1026 or whatever it was. Under wsrranty but still worry that this one will go bad. Thanks for having the video on that too it was awesome to see what went wrong

[@blackbumble9988]

Hey Cardiac, the best automotive video I've seen on KZbin is the Mazda CX-5 coolant valve replacement. I have a 2015 CX-5

[@amirparvez5415]

Thanks for this video , my girl 21 mazda 3 turbo was getting this message. She took it to pep boys to get an inspection, told her the brakes are at half life and don't need to be replaced just yet . Everything else was fine , apparently. Came up this morning again when she was on her way to work expect it was flashing so she got nervous and pulled over to call off and come back home. I ended checking the reservoir because of the video and sure enough the brake fluid was low. Filled it enough pass the min and the light came off . Test drove around, car brake pressure was a lot more responsive and light never came on , thanks 😊

[@alexmanson1762]

I have a 2018 & 2024 Mazda CX-5. I'm glad I came across your videos.

[@ingodwetrust-n8b]

I need help on Mazda Smart break system malfunction and Forward Smart City break support malfunction while traction sign is on and parking no sign.

[@blackbumble9988]

Hey Cardiac Plays, I need help,, I have a 2015 CX 5, 2.0. AUTOMATIC WITH MANUAL SHIFT. When I shift from park to drive and release the brake the transmission takes about 3 - 4 seconds to engage properly. Usually it should move as soon as you shift to drive. The transmission delays, so if go on the gas and the TRANSMISSION kicks IN late the car will jump suddenly. DANGEROUS. I HAVE TO WAIT FOR THE TRANSMISSION TO ENGAGE, THEN GO ON THE GAS. THANNKS MA N

[@grit93]

thanks, great clear video. This is happening on my wifes 2021 cx-30

[@الموريداعسجماجمالخسائر]

How did you fix it ?

[@grit93]

unplugged the sensor. cant justify paying tons of money and time for 1 sensor

[@الموريداعسجماجمالخسائر]

@grit93 So my brake fluid is right at the min level line and it is bellow freezing where I am. I noticed that malfunction error eppear, disappear and reappear again and when i removed the sensor the error disappears. My question is it safe to drive with the sensor unplugged ?

[@grit93]

@@الموريداعسجماجمالخسائر Well im no mechanic so dont want to give you bad advice but from my understanding the sesnor is there simply to alert to too high or low fluid levels so I'd imagine it's good to drive as long as you keep an eye on the fluid level. My other 2 vehicles dont even have sensors

[@mikeh7434]

Nice Video... Any ball park figure what the cost may be like to replace the entire cylinder? Thanks

[@MyKonaRC]

Its about $150 Canadian (RockAuto)

[@carlpena4667]

Can you do fuel level sensor replacement cardiax that’ll help me a ton right about now

[@AquilesPelayo]

If you do end up replacing the master cylinder, you should definitely make a video on the install.

[@MATIKKMUZIK101]

My 2021 is giving e brake malfunction, maybe every other time i start the car. Have to restart the car to clear it.

[@KillaninjaFC]

Would love to see some CX-90/70 repair video examples if you're allowed to post them

[@CARDIAXPLAYS]

OK. Ill record one once one comes in with problems. Ive only worked on one CX-90 so far. Front differential seal was leaking.

[@KillaninjaFC]

@@CARDIAXPLAYS There are going to be plenty of TSBs coming your way! Especially front suspension and rear bump stop grease...

[@CARDIAXPLAYS]

@@KillaninjaFC Your not kidding bro. I've done like 6 recalls on some CX-90s all for software updates. Im just waiting for a customer to complain about the suspension noise.

[@joses3437]

Would it cause any issues if you leave it unplugged so the messages dont keep popping up?

[@CARDIAXPLAYS]

No. It will not cause an issue. I would probably just put some electrical tape over the connector to keep the elements out.

[@VinnyVarious]

Thanks Bro!!!

[@stmsaiya]

I hate new cars

[@loi2531]

Hey man where you location in Texas? I want some work on on my MAzda 3