Mazda 3 Possessed Infotainment System/Ghost Touch FIX

[@radieyevanov]

Screen Replacement Video Here: kzbin.info/www/bejne/pJ_Lg3moZ92Ne8k

[@Americam116]

Hi i have 2017 mazda 3 sport hatchback i never used touch screen i dont know if my mazda has touch screen but still i am facing ghost touch issue

[@radieyevanov]

@@Americam116 if it has the same screen like in the video and it is experiencing ghost touch then it has it. Disconnecting the ribbon like shown in the video or replacing the screen will solve the issue.

[@paulwilliams9489]

Just did this to my 2017 Mazda 6...now working perfectly. No more display issues and $2,400 saving. Thank you.

[@radieyevanov]

Right on! 👊

[@501_spyder]

What was going on with yours? I have a 2017 Mazda 6 and my screen keeps backing out, almost as if my back button is stuck, but it doesn’t appear to be stuck. I’m not sure if doing this will fix my issu

[@paulwilliams9489]

@@501_spyder the ghosting of the display as explained in the video was my main issue. Music skipped, calls made and dropped where the main problems. All fixed now.

[@hamzipamzi]

I have removed the mazda 6 2017 screen but I can't seem to find the ribbon :(

[@puddleduckist]

My 17 mazda 6 is ghosting 2. Just ordered the screen repair kit. Annoying, glad 2 see it's not hard to do.

[@lfeeneykildare]

Still out here changing lives 3 years later. Been driving me nuts for 3 months now. Additional disassembly was required for the 2017 but still worked. Absolute legend. Thanks for the video!

[@radieyevanov]

Thanks man! Happy to hear you got it fixed 👍👊

[@savana716]

It was nerve wrecking to cut the ribbon, but SO THANKFUL it worked!!! The display on my 2017 Mazda 6 looks a little different than yours. There are WAY more screws (~4 big ones & 6 small ones) to disassemble to gain access to the ribbon, plus there isn't a white bar connected to the ribbon. Very glad it worked, and it only cost me $10 for a socket extender to get that first bolt. Thank you to the creator and to everyone who left tips in the comments! :)

[@radieyevanov]

Good job Savana! 👍

[@gungan5822]

You didn't need to cut it. It literally comes out of the ribbon connector very easily.

[@chrisvelme1101]

Your video is a life saver, ive been dealing with this problem for over a year now. I always thought it was the buttons in the center hub(almost smashed them to pieces multiple times now). The dealership ship never wanted to fix it.

[@radieyevanov]

@@chrisvelme1101 👊

[@TheLoganTharp]

Man is out here doing the Lord's work! Been dealing with this intermittently for a year and it's just getting worse. Never use the touchscreen anyway, so great way to save some $$. Thank you for taking the time to put this out there!

[@xasperations]

Absolute legend, worked perfectly. Our Mazda 3 also "ghosted" when driving as well. I thought the control module in the console was the issue, Mazda wanted $1100 for a replacement which would have done nothing, I would then have had to buy a screen. $2000 all up, so many thanks.

[@radieyevanov]

No problem 👍

[@The323GTR]

I was at Mazda today and mentioned a fix, where they would disconnect the touch screen. They wanted 90mins of labor to do it… I’m glad I found your video! Much appreciated 🙏🏼

[@radieyevanov]

@@The323GTR 👊

[@Yhl3x5]

Thank you so much for this video. My daughter’s 2016 Mazda CX5 Touring was having all sorts of issues with random button presses. We updated the firmware, did the Car Play upgrade and updated the Nav SD card hoping all that would fix stuff, but while it improved a little, the ghost, as we called it, still persisted. It wasn’t until I stumbled upon your video and some others discussing disabling the touch screen did everything resolve. While the 2016 CX5 Touring has a slightly different looking head unit, it’s still very similar to what you show here. The ribbon is at the bottom of the display and just needs to be unplugged/detached. I’m not a very techie person and found this a do-able project (especially after just having done the Car Play upgrade). Just a little bravery that it will all come back together and your video was all that was needed. A big thank you from my daughter and me for putting this together. All the best!

[@radieyevanov]

Thank you so much for the kind words Yan! So happy to hear this was beneficial for you and your daughter!

[@davec.4925]

Thank you so much for posting this. My 2015 Mazda 3 was similarly possessed and your video was very clear. I was able to pull the ribbon cable and no more ghost touches. Only thing I will add: If like me, you managed to drop that bolt down into the abyss of your dashboard and can't retrieve it, the thread size is M6-1.0.

[@radieyevanov]

That's good info about the bolt thread. Thank you. I have a video on the way showing how to replace the touchscreen digitizer if you want to regain functionality of the touchscreen.

[@davec.4925]

@@radieyevanov Thanks! To be honest, the only thing I ever found the touch screen useful for was entering addresses, but I haven't used the navigation system in years. I just use google maps or waze on my phone now. With all of the other infotainment functions, I always use the jog wheel anyway. The ghost touch issue was especially annoying for me because I had disabled the motion lockout, so my screen was going crazy all the time, not just when stationary. But I'll certainly check out your repair video when it goes live.

[@radieyevanov]

@@davec.4925 I am exactly the same as you! Never used the touchscreen so was easy to disconnect it. But at the time I made the video they didn't sell third party screens so it would have required buying the whole unit to get the touchscreen back. Now a third party screen is very cheap so I figured I'd put out a video about that.

[@johncorcoran9064]

This was so helpful...I had no idea the warranty on this was extended to 7 years (still covered)! Thank you, Radi!

[@radieyevanov]

Anytime! 😊

[@shannonschmidt3333]

Thanks for the post. Tried this on my 2017 CX-5. Was able to do it, but not without a couple of adjustments. In the 2017 CX-5 there is a small plastic piece blocking access to the “ribbon” you have to disconnect. Since it was either make this work or give $800 dollars to dealership for a new unit, we decided to cut off that plastic piece with a dremel tool. Success!! There were also a couple of additional bolts to remove, but those were no big deal. Couldn’t have done it without this video!

[@radieyevanov]

Awesome! Nice job! Thank you!

[@hamzipamzi]

Same for mazda 6 2017. I will try to cut the plastic

[@jadedspades]

Horrible. I missed the so called extended warranty period. Mazda never notified me... Idk how, I have owned the car since 2016. I am on this fox Thank you so much!!

[@radieyevanov]

Welcome! Good luck!

[@richardmcinerney430]

I just finished this on my 2017 Mazda3. Big dollar savings. Like yourself, I never used the touchscreen. Your video is perfect in detail and clarity. Many thanks.

[@radieyevanov]

Thank you Richard!

[@wondersoxx]

You saved my sanity! Great video. Easy to follow and worked like a charm. Thank you!!!!

[@radieyevanov]

Haha you're welcome!

[@kevincaillouet7641]

You just saved me $1200, since my warranty expired LAST MONTH. It fixed the problem in a 2018 Mazda 3. I forgot it was a touchscreen anyway, so no loss. THANKS!

[@radieyevanov]

Right on! 👊

[@AlexNoel100891]

Perfect instructions. Perfect solution. As these cars age, I imagine this video will gather more and more views.

[@radieyevanov]

👍

[@Feex92]

It just happened to me, Mazda 3 2015.. I guess we will all start to meet here :D :D

[@TheLazzanova61]

I agree. This is what brought me here. Thanks for the solution ans upload of this video.

[@taolaMrD]

Dude, my 2015 Mazda3 was driving me insane!! Then your video came and saved the day!! I never used touch anyway (always use the nob). Thanks bro!

[@radieyevanov]

Anytime 👍

[@jts09]

Thanks so much for this video. My wife's car just started having this problem (55k miles). What a giant pain. I was able to make this "repair" in about half an hour. Since she never used the touch screen, it hasn't impacted her at all.

[@BethanyKausch]

Pleased to report that this worked like a charm for my 2017 Mazda 6! The method for the 2017 is definitely a little more complicated and requires more disassembling. I also had to disconnect the plug for the start button which was quite unnerving. In order to access the ribbon, you have to open upon the screen entirely as in, remove the front plastic portion from the back plastic panel. At that point, the correct ribbon lines up with the plugs as shown in the video. It was easy to reassemble. I have exorcised my ghost!

[@christamolez]

Amazing!!!! Just did this to my 2015 Mazda 3 with a ghost touch and it worked great :) just disconnected the ribbon piece that is connected to the white piece where he pointed out. Thank you!! Also the dealership said they “couldn’t disconnect my touch screen” when I asked - clearly they just didn’t want to!

[@tdcoll]

Thanks for these instructions. I just finished disconnecting the touchscreen cable- no more ‘ghost’ screen 😊. I’m somewhat of a newbie and your detailed steps made removing the trim straight forward. Thanks again.

[@radieyevanov]

You are welcome! Happy to hear it went smooth for you!

[@alejandrae5605]

Yes yes and yes!!! “The ghost” called many people without my input and I was not able to stop it!

[@radieyevanov]

Haha too funny!

[@puddleduckist]

I just did this in my 2017 mazda 6, I was getting the crazy ghost touching more n more. Literally had the head unit out in 5 mins, so darn easy. Then disconnecting the ribbon was also simple. While I had it out I used 90% rubbing alcohol and cleaned off the scratchy anti glare coating, now looks shiny n smooth and no more ghost touch. Thanks for sharing this!!! Such a simple fix!! I never use my touch screen either!

[@jakubestok1631]

Just did this to my mazda 6 2019, works perfectly. One update to my model year, plastic cover on my unit was covering the ribbon cable, you need to unscrew the remaining screws, tilt the bottom of the cover up and you can see the ribbon cable in the same spot as in the video. Fyi something holds the cover from the top- no need to remove the whole cover just make space to disconnect the ribbon+ plastic sometimes catches on the connectors, so pay attention to that. Thanks for the video!

[@michaelkarrandjas8054]

Thanks! Occasional ghost touches on my 2015's screen have been driving me nuts. Problem got WAY worse yesterday. Found your video and 10 minutes of work later, the problem is gone.

[@radieyevanov]

👊

[@sodaxnet]

Thanks for the video Radi. Polish Mazda dealer Odyssey pretends not to know anything about this issue. I don't believe them. They want money for diagnosis ghost touches. With your video I've fixed it in 30 minutes. I don't care about touch feature, I hadn't used it at all.

[@radieyevanov]

Same here, never really use the touchscreen. Rock on man! 👊

[@sparkiehavener7254]

Thank you for posting this solution. The ghost touch was starting to drive me nuts. Your solution has saved me.

[@radieyevanov]

Welcome!

[@krissanderson5004]

Thanks, this was a great solution to my problem. My car was not subject to the recall. I never used the touch screen, so this is a great answer to the problem.

[@radieyevanov]

Welcome!

[@loganbrash7492]

my screen stopped working the day before my driving test tomorrow and i was freaking out thank god i watched this and fixed it you are a life saver

[@radieyevanov]

Lol Neat story! Cheers mate!

[@janieder]

Thanks, Radi, for taking the time to post this well-made video. Your instructions worked great for me, and the ghost touch is now solved on my 2015 mazda 3.

[@radieyevanov]

You are welcome!

[@zakholsey5004]

I’ve had this problem since I bought my car. You sir are a legend. Works like a charm thank you

[@radieyevanov]

Glad to help! 🙂

[@timc5367]

Wow!! This worked perfectly and took about 15 minutes. Thank you so much for the video. You demonstrated everything perfectly.

[@radieyevanov]

thank you for the kind words sir! happy to hear it worked well for you!

[@marie-pierlaliberte1836]

OMG, you just saved me 2500 Can$. I cant believe Mazda isnt doing anything for this passed the warranty since it is a well known issue. Thanks a lot.

[@boyntonbri7823]

Awesome video!! I have a 2018 Mazda CX-5 and my touch screen was driving me insane. The dealership said the only way to fix was to replace at $1,500 for unit (+)labor. Thank you brother!!

[@radieyevanov]

Anytime 👍

[@Wokisan]

Have a 2016 CX-5 that once the weather gets warm, the ghost touch goes crazy. I'll be using this video to fix the situation. Thanks!

[@UnluckyHydra]

My 2015 Mazda 3 just did this for the first time this morning. Freaked me out because I was just listening to some ghost stories right before hand. 🤣 I'll have to give this a go. Thanks!

[@radieyevanov]

hahaha that's too funny Derick! 😂

[@johnfrancis1776]

Absolute lifesaver, even 14 years later. This process was pretty much identical with the 2018 Mazda 3, just requiring the removal of ones more bracket before accessing the ribbon connection.

[@xXUbliTZXx]

This issue drove me insane to the point I smashed my control knobs in, in a fit of rage 😂. Now I have ghosting and broken knobs. Wish I found this video sooner lol

[@radieyevanov]

Hahaha that's too funny 😂

[@ryancaldwell9041]

Just had this happen on my 2016. Been going crazy for about a month, getting progressively worse. This video helped. Thank you!

[@radieyevanov]

Glad to hear it! You are welcome!

[@Algernon7]

Thank you for the guide! I recently bought a 2015 Mazda 3 and this issue in the bottom right corner. So if you were listening to music at a stop it would skip forwards over and over. I'm like you and never use the touchsceen so this solution was perfect!

[@radieyevanov]

Yeah it was great for me too as I never used the touchscreen anyways! Glad to hear you fixed it! 👊

[@Henry-bz7pr]

Almost smashed my mazda 3 infotainment screen up as it was driving me nuts, cause of the youtube clip, I've fixed it now, thank you very much vanov

[@radieyevanov]

You are welcome Henry 🙂

[@cd5927]

This just saved me so much time and headache on my 2014 Mazda 3. That actuator arm has actually popped out of it's pivot but it reseated no problem and now it works like a charm. Gotta hand it to Mazda for actually putting in effort to make shit easy to work on in these cars. (looking at you American car makers)

[@radieyevanov]

Lol you're not kidding there ☺️

[@WilliamJohnson-ft4du]

Worked. I wound up having to cut the ribbon instead of unplugging it. But I rarely, if ever, used the touch screen, so that's no big deal. Thanks!

[@TheBwudebwu]

I just did it cause my infotainment was like yours, possesed. Your video did the trick, thank you.

[@radieyevanov]

You are welcome Steve!

[@mikecurtis3643]

Outstanding video! Totally explained and easily solved our issue with the "ghosting." The dealership informed us that we were 5 months past the warrantee and wanted 1,100 dollars for a full replacement. We had no idea this would happen til it did, they didn't care. We performed the fix you demonstrated, now it's completely fixed! You just saved me 1,100 dollars.

[@radieyevanov]

Cheers Mike!

[@WinstonMakesMore]

Good explanation. Ended up here because Mazda’s touchscreen in the CX-5 is also prone to this issue.

[@kennethdarwood2715]

Thank you for the video! The fix is fast and easy. Two things to help those trying this themselves: 1: The decorative bezel clips are springs, they do not need to be depressed. Simply pry out the bezel 2: The screen ribbon cable is very hard to see with the screen assembled. The screen can be easily disassembled by removing the four small screws and separating the plastic frame from the base. Then pull the white ribbon cable keeper back towards the edge of the circuit board and pull the cable out of the connector.

[@CodeMeat]

Thanks for the instructions! This ghost clicking issue was driving me crazy！ (Mazda knew it but refused to recall just extended the warranty to 7 years which mine is denied by dealer, they said the sales had retired blah blah blah just do want to honour it anyway so I DIY...) Just few tips to add to those got the same problem 1. there are 4 more screws on the back and bottom, remove them and with a bit of force you can separate the plastic cover from the display unit. Make the gap wide open 2. use the tiny flat head screwdriver to pull the white part outward, it will release the cable easily 3. be careful when you're loosing and tighten that main screw at 4:43, you don't want to drop it! Trust me! Hope this help.

[@radieyevanov]

Haha hate when I drop bolts/nuts 😅

[@DimSumSaying]

i just follow your detail instruction and got it fixed. Thanks for your kindness and help!

[@radieyevanov]

You are welcome! Thank you for the kind words!

[@sharonhumphrey625]

Thank you so much for this video, my partner and I just fixed my infotainment system on my 2014 Mazda 3 saving hundreds of pounds, I am extremely grateful as it was driving me mad 🤣🥰

[@radieyevanov]

You are very welcome! 🙂

[@KellyCammidge]

Thanks so much for this video! I am in the UK and my Mazda 3 is a 65 plate and this has been happening for months! We assumed it was dust or crumps within the console so we will try this. The amount of times calls have been made 🤦🏼‍♀️😆 thanks again 👍🏻

[@radieyevanov]

No problem. Good luck.

[@KellyCammidge]

@@radieyevanov I also found whenever someone phoned me whilst diving, I could never answer it, the call would be cancelled immediately and there was nothing I could do about it! So frustrating. Don’t know if you or anyone else found this?

[@jeremytilsen8881]

Thanks for the help! This was great. The white part of the black cable is what moves.

[@radieyevanov]

Welcome! And yes, the white part is what moves

[@valeriep6077]

OMG THANK YOU!! this has been driving me INSANE!!

[@radieyevanov]

Haha ☺️ you're welcome

[@daveolden181]

Honestly, I actually forgot my 2017 was even a touchscreen and was thinking the problem was in one of the switches lol. Thanks for taking the time to share this

[@radieyevanov]

Haha that's how I was too cuz I never use the touchscreen but figured out it had to do with it as it would only happen when the car was stopped or coming to a stop with slow speed

[@bigal6684]

This is one of the best videos ever....Thank You

[@radieyevanov]

Thank you 🙃

[@demetmavrides4482]

You are the man! Thanks for sharing this info. Like others, I thought my issue was the control knob. I had to go a step further and seperate my screen to get to the ribbon(2016 Mazda3) which was only 4 small screws. I like my car again:)

[@radieyevanov]

🙂

[@davidcollins7912]

I just fixed my 2016 Mazda 3 display. It was easy to do after seeing your video, thanks! I rarely ever used the touchscreen function anyway.

[@radieyevanov]

Nice David! 👍

[@Jassy143]

Just called Mazda dealer. No luck with warranty for my 2015 Mazda 3 😞. Might ask my brother to perform this for me since I suck at fixing things 😀. Thanks for the video

[@radieyevanov]

Not a problem. It's easy. Let him do it 😉 hardest part is honestly trying not to snap any of the plastic lol

[@prezarts.r.o.6247]

Thank You very much, I was dealing with this problem over a half year and i took 15 minutes to get rid of this!

[@radieyevanov]

You're welcome 🙃

[@giss9966]

This was fantastic. Fixed the issue in 20 mins, now working perfectly! Thank you Radi eye vanov :)

[@radieyevanov]

You are welcome Melissa 🙂

[@cathyadkins9061]

You just saved my sanity. I couldn't figure out why my radio randomly scanned for new stations. I will contact dealership tomorrow to see if I qualify for recall that they extended for 7 years. If not, I will disconnect.

[@radieyevanov]

Good luck!

[@vintage5532]

Thanks for the guidance. I was also really nervous removing the ribbon, but it worked a treat so thanks.

[@radieyevanov]

👍

[@im1ofthefew]

I’m going to try this for my Mazda 6. Sad it’s already kaput after 4 years.. Thank you so much!

[@radieyevanov]

Good luck! It's just the bad touchscreens. Not Mazda's fault as they don't actually make the touchscreens but they have learned and switched them out on the newer ones.

[@platinumsilvergreen]

just having this issue but did realize its a common issue and i just passed the 7 years extended warranty...I hope there was a class action lawsuit to extended this more. fro now I will try to see if I can follow removing this ribbon..

[@radieyevanov]

You'll be able to Joe 😉

[@DaHuuudge]

They always make it look easy, but because it’s auto repair, there are always complications - like stripped screws, stuck clips, and extra dismantling to do. Thank you though… it took a few days and a couple extra tools I had to buy, but I finally got it done. 😅

[@MirekZyzak]

Thank you so much for this, it was an easy task to do once I saw your very detailed video. Problem solved! Much appreciated!!

[@radieyevanov]

👊

[@Calihan]

Just did this earlier today, thanks for the video! Almost lost the dang screw in the back down the air vents tho, careful ya'll

[@WebHead18]

Im incredibly uncomfortable pulling my dash apart 😢. Ill have to deal for now, but happy a fix exists! Right now, shuffle gets pressed constantly. I'll revisit this if it gets worse.

[@radieyevanov]

It's either you pulling it or someone else when the time comes. First time doing anything like this is always nerve racking. Maybe it's just me, but t's satisfying once it's off 🙃😄

Dude! You help me fix it. It took me about 20 minutes.

[@radieyevanov]

Right on 👍

[@jamiejinhoshin5391]

Just did this and working perfect! this video save $$$$$$ Thank you!

[@nobigdeal01]

Used this video to guide my fix to my 2017 Mazda 6 ghost touch. It was slightly different on the 6, but worked out well. Thanks for creating and sharing.

[@radieyevanov]

Anytime! Glad to hear you fixed it 👍

[@hamzipamzi]

I cant find the white ribbon

[@radieyevanov]

@@hamzipamzi the ribbon itself is not white, usually dark bronze. The clip it goes into on mine was white but I'm sure it could be a different color as well. It's the wide flat ribbon at the bottom!

[@MarkEddington-l5c]

Great video it worked. Thank you. And shame on mazda for putting a product out there they knew what's defective.

[@radieyevanov]

Thank you. I can't blame them too much as they don't make the screens themselves and I don't think knew that they would be susceptible to damage after years of use. I have a new video coming out soon showing how to replace the screen and retain the touchscreen functionality.

[@diabloein]

Thank you, just bought a 2014 and it has ghost touch issue right in the bottom center. I have been having to drive around with it on the main home screen so there was nothing to click but this will allow me to be able to actually sit in my music screen and navigation without it going crazy.

[@radieyevanov]

👍

[@vayorke]

Thanks for the video! Ended up removing a bit more of the black plastic frame to get at the ribbon but it all seems to work now!!! 🙌🏼🙌🏼

[@radieyevanov]

Awesome 👊

[@robetheridge4008]

Great instructions! I’ll be doing this on the weekend. Thanks so much! 🙏🙏🙏

[@radieyevanov]

Welcome! Good luck!

[@abdulhaqq7735]

Thanks for the video! It fixed the issue on our 2016 Mazda 3. Called the dealership but no recall on our VIN.

[@radieyevanov]

Awesome 👍

[@skinpack3480]

Hi guys just did it today 22/09/2024 for those with mazdas 2014-2016 is very easy, what helped me a lot was that i bought some tools same like those that dentists use to scrap teeth! because removing that foil thing for the touch screen is a bit tricky!

[@benjafreaky]

Fantastic video sir. Every how-to video should be like this. Great work 👏 👍

[@radieyevanov]

Well thank you kind sir!

[@muppetman777777777]

Just wanted to say thank you for posting this

[@radieyevanov]

You are welcome! If you ever decide you want the functionality of the touchscreen back you can go the extra step and replace the screen for 30 bucks. I have a video on that coming out soon.

[@muppetman777777777]

@@radieyevanov I would watch that for sure. Have you done a video about how to root dash cam cables behind the trim? That might get some views too

[@radieyevanov]

@@muppetman777777777 I actually did a really nice dashcam set up to a double din touchscreen in my 350z but never filmed it.

[@dawndavenport7282]

Thank you! Did this today and it definitely works. I’ve been going crazy trying to sort this.

[@radieyevanov]

You're welcome 😊

[@Jasondnell]

I happy I came across your video man. You're a lifesaver! No more possessed touch screen #2017mazda6

[@radieyevanov]

No one likes possessed touch screens 😉👍

[@michaeldamico5152]

We have a 2017 Mazda 3 and on our Display Assembly the Ribbon Cable that comes from the bottom of the Display is held in (locked in) the Gray PC Board Connector with a Black Rotating Locking Mechanism. If you just try to pull on the Ribbon Cable (as shown in this video) the Ribbon Cable is going to rip in half. To Un-lock the Ribbon Cable from the Gray PC Board Connector, lift up on the part of of the Black Plastic Locking Mechanism that faces the bottom of the Display Assembly and that will let you be able to pull the Orange Ribbon Cable out from the Gray PC Board Connector. I didn't realize the Black Plastic piece rotated up off the top of the Ribbon Cable until I took the whole thing apart to get a better look at it. Maybe someone could take a photo of one of these newer types and post it.

[@keywest4life]

i just fixed my ghost touch issue with by following this video. I was not able to disconnect the ribbon cable, so I just cut it. No more crazy screen issues. It took abiut 15 minutes from start to finish.

[@radieyevanov]

👍

[@craigschneider9697]

o.k., you just saved me somewhere between $300 (repair) and $600 (used replacement) dollars, lol. my wife's 2017 Mazda 6 display was doing the same thing. the ribbon cable was a different assembly but everything made sense. if you are ever in the louisville, ky area, i owe you an adult beverage.

[@radieyevanov]

Hahaha thanks Craig! Cheers 🍺

[@iggy0978]

Thanks for this. I couldn't get Mazda to honor a late warranty fix even though I had been in and out of service for this type of issue many times. Probably filing a claim with the BBB

[@radieyevanov]

You're welcome! I literally never used the touchscreen function so for me it was not worth fighting with mazda or anyone

[@ArmChairPlum]

In my case the Mazda tweaks has been installed and touch screen use not limited to stationary. It was sold back in 2018 (2014 model) as having android auto installed which the car yard couldn't verify as they had an iPhone. Turns out it was the unofficial tweaks one! This new feature is a welcome addition 😢 Just like the amount of condensation inside the headlights which in the past has caused it to fail a WOF (a yearly inspection of basic road worthiness in NZ)

[@karlyorston3147]

Hi everyone. This seems like a perfectly useful fix if you can't get satisfaction through Mazda. However, as one comment below mentioned an extension of the warranty for this issue, I searched for such and found that it had indeed been extended to 7 years from the make of the car (at least in the U.S.). I can't seem to attach the downloaded bulletin here, but if you Google search: "2104-2016 Mazda3 - Mazda Connect Touch Screen Concern Warranty Extension Program - Special Service Program (SSP) B6" it will take you straight to the page where you can find the bulletin to download as a PDF. It explains which Mazda3's will qualify for the service (by VIN, etc), and how to go about getting the service approved. I wound up printing it out, went to the local dealer and explained that I had the Mazda3 "Ghost Touch" issues going on and mentioned the warranty extension bulletin, and they made an appointment for me on the spot. It seems to have cleared things up perfectly after they changed out the screen!

[@radieyevanov]

That's great and useful info! Thanks Karl!

[@jts09]

I sent an email to Mazda USA about this failure on my wife's '15. I got a reply that Mazda extended the warranty on the display to 7 years? I don't recall getting a notification, but it wouldn't have mattered since her's just failed ('23). If you have a newer Mazda with a touch screen problem you may want to check if this extension applies.

[@stevenkaye5263]

Thank you for a perfect video mines been doing it for a while now, will definitely be doing this at the weekend, saved me a fortune

[@radieyevanov]

Welcome sir!

[@pchayprasart]

It worked, Thank you from Thailand.

[@radieyevanov]

Welcome!

[@slyclops]

Thank you so much for making this video!! You rock!! This was a very quick and easy fix and worked like a charm.

[@radieyevanov]

You are welcome!

[@TheJohn2094]

Never knew my car had touchscreen was never told 🤦‍♂️ I have a 2016 Mazda3 and it's having the same issue thanks. 🍻

[@radieyevanov]

Haha too funny! And no problem, welcome!

[@jimbob5892]

useful hell. i have had the car for a few years never knew it was a touch screen lol,,,thanks!!

[@radieyevanov]

Haha 😆

[@focealix1998]

Thank you for the detailed video, fixed the problem!

[@radieyevanov]

You are welcome

[@youhadmeathalal8635]

Amazing video, this is exactly what I needed to see! Im going to call mazda to see if I’m eligible for a recall Thanks so much!!

[@radieyevanov]

You got it! 👍👊

[@youhadmeathalal8635]

My warranty is only for 5 years, since I have a 2015 model I’m not eligible for the recall :(

[@radieyevanov]

@@youhadmeathalal8635 just pull out the wire and call it a day! You won't regret it 😉🙃

[@npinjest7779]

Thanks for the instructions, really helped visualize the procedure, took me about half hour. Separating that cable with the back cover still on is a bit ambitious, mine was firmly enough in place that I had to go a step further, taking out 4 more screws to take that cover off. Easy enough. Do you happen to have any idea what an extra connector might be in there for? I found it when I took off the display unit - in addition to the 1+2 I had to disconnect, there was another one, not connected to anything.

[@radieyevanov]

Can't say that I do. Without seeing it I am not exactly sure what connector you are referring to, sorry!

[@andastir]

This just helped me so much! A big THANKS from Germany. 👍

[@radieyevanov]

Bitte!

[@yuriwana1]

Just done and It is warking. thanks!

[@radieyevanov]

@@yuriwana1 welcome!

[@vectron12]

Thanks for the save. Just started happening and did this as soon as it started.

[@radieyevanov]

No problem!