Mazda 6 Rear Wheel Bearing

In this video I am changing the rear wheel bearing on an 03 Mazda 6.
Check out my website ventremarketing...
Check me out on Facebook www.facebook.c...
Here's the bearing I used amzn.to/2KmocsV

[@rigobertohernandez2420]

Congrats ! I was watching your video,Mazda 6 rear wheel bearing and want to tell you how professional you are with the tech stuffs and use of hand tools and specific features so I am talking about what instruction say for example what should be the torque for the specific nut or something like that and of course your advices.So botton line continue with a great job . By the way I am writing you from Costa Rica.Local time 14:14pm on Sunday December 01, 2024.Thank you so much defintly this will help us a lot.God Bless you and family.Have a good one.

[@peteburridgeburridge616]

Wish there were more instructors like you . thankyou !!!

[@sulev111]

this seems quite easy and fast. A garage just offered me this job - 2hours!!! I think i'll do it myself.

[@capiberra4118]

Surface rust on my caliper bolt heads has reduced them to somewhat less than 14mm but more than 13mm. I can't budge them for fear of deforming the heads even more. I have penetrating oil soaking overnight, in hope that they'll shift a bit easier tomorrow morning. Roadsalt, ya gotta love it!

[@capiberra4118]

Excellent video tutorial. Thanks!

[@FishingandRacing]

Great video. Thank you. I know what I am doing this weekend.

[@capiberra4118]

Ok so actually, you replaced an OEM bearing assembly with another bearing assembly. I'm such a cheapskate that this bothers me. How possible is it to instead, repair the original bearing assembly, by pressing out the old bearing race and pressing in a new one? Thanks.

[@ventregarage3002]

Capi Berra I haven’t done it on this one, but I have done it that way on a few Honda’s. Generally you have to heat the bearing red hot with a torch to get it out. It’s much easier to do it this way even though it costs more.

[@taylorwerner4012]

For me buying the whole assembly was cheaper than the bearing itself which was odd to me

[@gratefulaya192]

great video, but one question, how can you work with those giant gloves on your hands? the other thing is that the 2 screws that are on the rotor, i take them off and then go to Ace and get the same ones but instead of being a phillips, it has a Hex Key.

[@ventregarage3002]

Grateful aya I love those gloves. They are overpriced but they fit great so I can do some pretty detailed stuff with them. I never put those bolts back in. The wheel holds it in place, but I bet the hex heads won’t strip as easily.

[@FocusedHands]

Looks like this will fit the 2005 ford focus! I'm going to the junk this weekend to test this!!!

[@chriscronin7306]

Is this the same as a 09-12 Mazda 6

[@ventregarage3002]

Chris Cronin I’m not sure. I can’t imagine it would be much different.

[@santorres628]

Seems like you could have just decomposed the caliper and taken the bracket with the caliper out without taking the pads or anything out

[@vladiberaun]

amigo te falta el reposicionador de piston ,para que no lo hagas con pinzas..

[@vladiberaun]

www.ebay.com/itm/Reposicionador-Pistones-Freno-Profesional-39-Piece-Brake-Piston-Wind-Back-Kit/390184653268?hash=item5ad8d151d4:g:qKYAAOSw2xRYjwn2

[@johngoard8272]

Glad you don't have to anything on my 6 mate pretty sloppy fitting!!