MAZDA CX-7 HEADLIGHT REMOVAL REPLACEMENT HEADLIGHT ASSEMBLY REPLACEMENT

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@Wondermel13]

I know this is an old video, but wanted you to know you are a Lifesaver with your videos! I am a single mom, that has learned to be pretty handy to save money. I own a CX-7 and over the past couple of years your videos have allowed me to save Thousands by changing the little things like oil and filters, but also window regulators, brakes with calipers and rotors, sensors and more. This weekend I am tackling replacing the headlight assembly and rear bumper cover, as the vehicle is being passed down to my daughter when she gets her license in a couple of weeks. Thank you for the time you put into these!

[@jakebumbstead]

Good video. Quick and to the point. I especially liked how you narrate it while someone else does the work.

[@stevemcvay8413]

This video helped me replace headlight assembly on my daughter 2011 CX7. Thank you

[@infernowing]

Thank you so much for this, saved me over $700. Repair shops wanted to charge $1000+ to replace the headlight assembly after a bulb wiggled loose and melted part of the housing and the car failed inspection. Found an aftermarket headlight assembly and replaced it myself.

[@computersmilodon]

How long did this process take?

[@Catfishgrande]

Nice work. One more KZbin DIY in the bank! Thanks.

[@MrNinpo0]

Thank you guys, you saved me several hundred dollars, I'm sure.

[@MarkEmersonDonnelly]

Thank you so much! I just changed the two headlight assemblies this afternoon. Took 3.5 hours from getting things ready to driving off. Do you have one on adjusting the headlights?

[@edwardlally617]

Great video! I was able to change my own headlights!

[@1978rayking]

Nice videos , I'm also just curious on the cx7 on changing the transfer case and rear diff assembly as a whole part not rebuild or anything.

[@jessieveggies2396]

you saved my life

[@c.d.7130]

Thank you for the tutorial. I found one more plastic piece for my 2011 CX-7. That of course broke. However everything else work perfectly, thank you for saving me money

[@computersmilodon]

What plastic piece are you referring to? I am doing this soon on my 2011 and would really appreciate the pointers so I don't break it as well. Thanks!

[@BayAreaMusicVideos]

Dude this guy's voice sounds exactly like "Gru" from "Despicable-Me" i thought that was a made up voice!!! 😲 Thank you Gru!

[@robertdelvecchio6690]

You guys are awesome!!! This is my project for this weekend.!!! Thank you very much.!!!!

[@Michael-v4m2i]

Please tell me how to replace the 2012 cx7 fog light and indicator

[@samisonittonga7061]

Love your videos man!! Keep it up!!

[@mdschm1]

There has to be a certain level of Hell reserved for the designers of these cars! Remove a F’ing bumper to replace a headlight!?!?!? WTF!?

[@AJ-zv9tn]

I just removed the top bolts and pulled the whole bar forward to access the bolts on the headlight housing. Took all of 20 minutes. On an Audi it took two grown men with experience working on cars 3 full days to change the bumper.

[@Aero_Manager]

@@AJ-zv9tn Yes this is works, you don't have to remove the bottom clips/screws, only the upper and the side(wheel arch) of them. Then you can pull outside the plastic cover a liittle bit for bottom headlights screws clearance.

[@toddwilliams5905]

And all the different $5 clips and fasteners. What a lame design to remove the cover.

[@bearfn34]

Thank you !!

[@Arturbo274]

Nice video bro, thanks for do it

[@RicardoMontalvoPastor]

I have a 2007 CX7 and I thank you so much for every video you have put out for different projects and works to do on it. Will I be able to replace non HID Head Light (all head lamp) with original mazda HID Head lights for the same year as mine with out any mayor work? wiring, any other costume work that you know of that I have to get involve on it? Or do you know any web page that has a procedure on this matter? Thank you and I do appreciate your work.

[@computersmilodon]

Do you know if the 07-09 headlights are also compatible with the 10-12 model years after the facelift?

[@michelleanais2445]

Thank you.

[@pawldel7119]

Will this work on a 2018 mazda cx-3? I hit a deer and need to replace my passenger headlight assembly.

[@Gdonisblue]

Can I put a headlight from a cx7 into a cx9? They look absolutely the same.

[@maxh4782]

The cx7 headlight has a large reflector for the high beam, making it longer than the cx9 headlight. Sorry, it cannot work. I just sanded my wifes cx7 headlight with 550 then 1200 (wet sand), used drill buffer with auto compound and then meguiars plastix and it became new again. I then sealed with meguiars spray on headlight protectant. Good luck

[@rodlrfilmmakercreator1460]

Can I buy an halogen lights and just replaced the old regular headlights or I need to buy the whole kit lamps?

[@TheLhwcold2002]

The first clip is actually pretty easy to remove.it work juz like wall plug.u juz need to pull out the center nail with finger nail it will come out perfectly

[@ramosfurtado5313]

Hi Auto Repairs Guys, Like your videos. Do you have any videos on how to straighten steering wheel on Mazda CX7 2007 model?

[@jonaskristensen3066]

You need your workshop, to do a tracking on the wheels, to solve your problem.

[@ryanbeach8510]

This is similar for 2008 Mazda CX-9?

[@ichoose2bhappy]

Do you know how to install the prop rod for the hood on this vehicle? I have to replace mine just wanted to know thanks

[@kathrynhubbard8756]

Thanks so much I love your videos

[@johngilbert5776]

Great video

[@brittperez7325]

I have a question. My brother drives a Mazda cx 7 year 2009. Both headlights just went out. Is it possible only the bulbs need to be replaced or could it be the wiring issue? I just wanna know how he can save the most money getting it fixed

[@chrisbevacqua2874]

Great video. Do you know if all headlights fit all cx-7's. Will 2007 headlight fit 2011?

[@karlitototototo]

Did you find out if it an 07 will fit a 2011??

[@KYMHeadlightRestoration]

It is a permaseal?

[@modar944]

For some reason i can't remove the 10mm screw 😢

[@07Convertable]

You should be the new Chekov in the next Star Trek movie!!

[@SawickiPeter]

spasiba!

[@Дмитрий-к9ж7е]

Можно снять фары без снятия бампера...

[@andreshunter]

My your videos are great... Thank you!! Now... Do you have any video that help to change the freaking low beam headlight (driver side)!! This engineers from Mazda are annoying!!!

[@cainsvids3088]

Terrible design. Got a close up but can’t see where to post a picture in the comments. To release the “clip” on a 2010, you have to push it in towards the light and then down.

[@Butcher614]

Fyi you don't have to completely remove the bumper.

[@Sefin88]

I'm all for not removing the bumper. I'm not super savy on this stuff though. Care to explain how to change it WITHOUT removing the bumper?

[@serialkilla128]

Nah he's not ganna say how, he just wants to be an asshole and say that he did it better

[@angelisone]

One of the worst Japanese cars ever made. Customer will always scream when he/she found out the cost to replace the headlight assy.

[@Psyrecx]

This was God awful to watch. That ape not knowing how to remove bumper clips and trying to rip them off with the wrong tool, was cringe worthy.

[@blessed2338]

Yeshua Hamashiach is God in the flesh, the Son of God, the Word of God, and he died so that you may be presented blameless in the sight of the Father. And so you may inherit his kingdom. The LORD Yeshua Hamashiach is the only way to the Father and his kingdom. Repent of your sins accept him into your life as your LORD and Savior before it's too late, every day is not guaranteed. John 14:6 Jesus said to him, “I am the way, and the truth, and the life; no one comes to the Father except through Me. May God bless you all.