Mazworx SRVQ Bell Housing Swap

[@PalomarJunkie]

Does it require any transmission tunnel hammering to fit in to a 240sx s14?

[@angelluis356]

Do you guys offer this bell housing for the KA24de ?

[@khaldrogo9451]

This is such a hack. You can get adapters that don’t require you to cut things out that much.

[@180sxdeano]

how dose it drive in a s13? feel like a stock shift/noise level?

[@Joseph-ex9kh]

What to do with the sr20 speed sensor to still work the oem gauge cluster?

[@180sxdeano]

i think you need to get a ABS diff, and run the speedo wiring through that sensor in the diff, via a dakoda digital speedo corrector

[@PeterHatch-mx7zc]

Do go with a sikky or a collins adapter ??

[@JohnSmith-qj4cf]

Do you have to a ls1

[@Kuidmaster]

What about adapter plates ? Is it just a matter of cutting the plate's thickness from the bellhousing lip and bolt everything up ? Bought a plate for the CAVG swap.

[@mazworxracingengines]

Hey man, If you bought our adapter plate is basically that, however; you need to machine the dowel pin locations as well. If you'd like a machining blueprint email [e-mail]

[@Kuidmaster]

Will do, thank you !

[@jason79812]

CAN THIS ADAPER USING ON A FF BASE TRANSMISSION?

[@britneyshaw8191]

I want this so bad for my sr20 s13 but curious what year is the 350/370z trans I know there are about 4 different reversions depending on years and do I need computers for the rev match versions

[@mazworxracingengines]

This kit works with all versions of the CD009 and no computers are required for any of them to function.

[@arnaldograceski6185]

Does the adaper plat fits both 05-06 and 07-08 CD009? And what you guys offer for the clutch?

[@bransonfleischman2233]

Arnaldo Graceski this uses any normal sr20 flywheel and clutch according to their website.

[@arnaldograceski6185]

What do you guys need to make the s2000 bell housing happen? I have and extra s2000 trans If you guys could find a block to make this happen

[@mazworxracingengines]

We would need a stock chassis with an engine and trans in it for a couple of months to develop the kit. As per your transmission question the adapter plate we currently offer only fits CD009's off of the VQ35de engine. We only sell the adapter plate, Competition Clutch sells the clutch components you will need.

[@FordSierraIS]

i can keep my s14 sr20 clutch and flywheel right?

[@mazworxracingengines]

Yes!

[@prayan18]

this works for RB26 to CD0009?

[@latroparacing2887]

No, only for SR

[@arnaldograceski6185]

Can you guys make something like this for s2000 engine and how much?

[@mazworxracingengines]

Hello Arnaldo, We would love to produce a kit like this for the S2k community, unfortunately we have just never been able to get a car in the shop for development. We currently only offer the adapter plate listed on our website.

[@teamEP789]

that must cost as much as my whole car

[@mazworxracingengines]

Well the base price of the kit is only about $1,600!

[@jesusfilberto3344]

$$$$ ???????

[@bransonfleischman2233]

Jesus Filberto 1600 without the trans