Me-410 Paper Card Model Part 27: Starting the Landing Gear
Рет қаралды 174
Күн бұрын
@gregoryperry4824 2 ай бұрын
I start with a much larger diameter rod and roll it, then step down to a smaller diameter and repeat. Continue stepping down in diameter until you are at the right diameter. Then I hit the ends with CA and the final seams if a long piece.
@fishbarbeque8540 2 ай бұрын
WOW!!! Ill try this next time!
@dansmith7617 2 ай бұрын
Smart as usual, Greg. Thanks for the tip. Next time! See you at the convention? -Dan
@gregoryperry4824 2 ай бұрын
@dansmith7617 still planning on being there.
@dansmith7617 2 ай бұрын
@@gregoryperry4824 👍
@mpetersen6 Ай бұрын
Dampen the paper. Roll it over the chosen diameter just to start. Blast it with a hair dryer. I've done it in the past.
@dansmith7617 Ай бұрын
SMART! I've tried wetting things but no drying. Great idea... -Dan
@mpetersen6 Ай бұрын
@@dansmith7617 Make sure you try it on scrap first!
That Little Puff
Рет қаралды 35 МЛН
Alexander the ok
Рет қаралды 51 М.
Times Radio History
Рет қаралды 143 М.