Mechanical Magic of LEGO Technic Lamborghini Sian FKP 37 42115 (8-Speed Gearbox)

[@Unbrickme]

If you have any questions regarding this gearbox or why yours doesn't work. Please DM me on instagram @unbrickme . There you can send me a couple pictures or a short video clip describing the problem. I'd love to help you out.

[@cagejohnson692]

my gears only shift one time, what might be the problem?

[@dcyt702]

When i am riding it on the floor i hear a tikking sounds what is that?

[@JAYPLAZZYT]

I have a problem if my gear but I fix it cuz I do something wrong cuz I guess I skip a page btw thanks

[@larzop5848]

How do you connect the gearbox to the suspension in the instructions one page shows it upside down and the next page shows it right side up

[@koreyjacas3672]

First off GREAT VIDEO.... i have a problem with my car i made a short video on it thanks in advance kzbin.info/www/bejne/aHWVdJJnqd-rrMk

[@chosbach411]

I really appreciate the time you take to explain the mechanical engineering elements of these Lego technic components. It gives a whole new level of enjoyment and immersion into the hobby.

[@briansenez7718]

Great video, I really appreciate the clear explanation and close ups! This is my first big build and I had a small piece in the transmission wrong. I've got it working perfectly now AND I understand it thanks to you.

[@Unbrickme]

Brian Senez thank you very much I appreciate it

[@seantomlinson3320]

That was amazing thank you. The working gearbox blew my mind and now seeing it, it still blows my mind. Thank you for explaining it so well.

[@Unbrickme]

Glad it helped!

[@S-Ltd1000]

I've just finished building this. It's an amazing set and i appreciate the engineering but how do you actually demonstrate it? It's not the kind of thing you can push around the floor.

[@KryptonKr]

In the first gear, you can feel more resistance when you push the car. When you go to the 8th gear there’s less resistance and the car can go a bit further with the same push with the first gear

[@Ibrahim-vx5kq]

Connect it to a motor

[@Nr1from1978]

+the engine is completely covered up when finished.

[@alexeecs]

@@Nr1from1978 you can see two of the twelve pistons

[@davedave6010]

It's more of a display piece but you can push it around like i do..

[@vladyslav_andreiev]

Wow!🤯 Your review finally explains why 3 last 7-speed supercars have 8-speed Lego-transmission🙆‍♂️ 😮impressive. Thanks 🙌 Maybe more impressive it's to build, see and switch all this beauty personally)))

[@thomasmartin9999]

Thanks for the info about the transmission being in neutral; prevented me from tearing it back apart. I appreciate your video a lot.

[@Worldwave]

Question: I don't think the numbers and ratio calculations mattered to me as much as the actual mechanism. I think the way it was presented was a bit confusing with the arrows and all, and the concept at some point was just left behind in favor of talking about the numbers. My point is, I want to learn how to design a gearbox mechanism, rather than learn the Technic Sian model's gear ratios. Do you have a good source for technic gearbox function? The problem I ran into occurs at 4:37. Until this point, it was clear where the power is going. But the arrows in this section are extremely confusing, because not all of the gears are properly visible, and your voice is just saying "here to here to here" without referencing anything visual. It's unclear whether the torque leaves the confines of the "box", the bluish gray frame, into the external gears, or if there is an additional gear inside the box that transfers the power. Beyond this point, you stop talking about the mechanism of the actual gearbox, and only talk about the multiplier and the ratios. The complexity I was trying to understand is in the 4-transmission gearbox.

[@lw4ve1488]

Oh my god. I have been waiting for this video for sooo long, thank you 🤩

[@Unbrickme]

No problem haha! I have a ot of unique LEGO Technic content so consider subscribing

[@RainbowBrick]

Damn that's complex

[@Unbrickme]

Yeah it took me a while to understand the gearbox

[@StitchOrSackboy]

Finally LEGO makes a AWD drivetrain for the Sian

[@Unbrickme]

they had such a drivetrain for many other vehicles

[@wallacewei6162]

@@Unbrickme Thanks for the great video. If I switch to drive, is it AWD or rear wheel drive? If it is AWD and no center diff, will it causing problems when making a turn on high friction surface? Trying to replace the engine with motor, and this question came to my mind. Thanks

[@jeffreyhalverson5614]

Thank goodness for your detailed video. From this, I realized I had the stud on the green stepper mechanism reversed, such that the R side would not rotate through speeds 1-4, and would not engage the left side every 1 revolution. Pulled the chassis in half, flipped the stud on the green stepper around, and voila...works as you advertise!

[@legoguyftw9045]

Never has a Lego technic video hurt my head as much as this did! 😂 👍👍

[@Unbrickme]

Sorry!

[@piggygaming7079]

My gearbox has a problem. Shifting gears from 8th to 1st works fine, but the next set of shifting from 8th to 1st doesnt move the engine, it alternates between this. Does this happen because I built it wrong, or is it really supposed to do that? Thanks

[@mikosoft]

That's so weird that it has essentially double the multiplier gears. Essentially the whole gearbox is more like a truck gearbox than a car one but very interesting to see how they did it.

[@simonanderson3961]

Very cool video! I'm making the Sian at the moment. While building it I could kinda see what was going on in terms of the two sliding pieces that engage with the otherwise free red wheels... But trying to actually manipulate everything and see the ratios is pretty tricky. But once you get the front axle assembly on it all comes in to place and you can manipulate the sequential shifter: so yeah don't be discouraged if you're thinking "hmm I must've done something wrong" or it won't turn or anything... it all comes together :D

[@Unbrickme]

thanks for the encouraging comment!

[@succeskidxd7589]

and i love how you tried to explain everysingle detail

[@justacarrot1649]

I remember building the Land Rover defender with its gearbox looking similar to the Lamborghini’s that kept on clicking. Does this set do the same?

[@banditgaming8891]

great video ! maybe someone has an answer for me: i have a problem while switching from 4th to 5th gear (or frfom 8th back into the 1st) the mechanism as itself is working, but with the shifter behind the wheel i cant skip into the 5th gear. the black part that turns the yellow wheel always slips over it during the attempt. with my fingers i can turn the part, but i recognize a significant bigger effort. I thint thats the reason why it doesnt work with the pedal shifter. the question is: do you also feel a needed bigger effort? from where it results?

[@banditgaming8891]

i found myself the answer :) for everybody who might have the same problem. in my case i used 2 yellow rubber bands instead of only 1, as in the book described. see also the video at 1:25 kzbin.info/www/bejne/Y5bCp4KAmd6bfZI it was a little bit difficulty to reach that point, but with a small needle i succesed to remove 1 one of the rubber. after that it works as it should ! now i can sleep well again... ;)

[@succeskidxd7589]

i cannot tell you how badly i want to thank you for fixing my sian problem i just want to say thank you to you in person

[@jltworks3167]

8:00 definitely fixable. Replace it with a solid 24T gear. I also fixed the issue where you had to push the chiron quite a distance for the engine to work, by replacing the 24/8 gear connection with a 1:1, greatly reducing timing. Does the Sián work in the same way? Do you have to push the model quite far for the engine to work? If so apply that same fix I just mentioned on the chiron, behind the rear axle. Great explanation!

[@Unbrickme]

Yeah I understand its fixable, but it would take too much time to dissasseble and reassemble, Yeah the Sian works the same way. Thanks for the tips! However, replacing the 24/8 with 1/1 will severely mess up the gear ratios, and the resulting speeds won't even be sequential

[@jltworks3167]

Unbrickme yes you are right, the marriage process is easily reversible but would still be a pain to get to lol. And It works fine for me with a 1:1 gearing. Again great video!

[@borisljubicic2363]

Do you need to lubricate transmission? I mean, will it work better if you lubricate it with silicone?

[@JoshuaGutz]

I'm about to start building this LEGO Technic 42115 Lamborghini set tonight. I don't want to watch this video until I finish so that I'm not spoiled by the experience! But, I was wondering if anyone has any tips, tricks, suggestions, words of caution for building this set or in general any Technic set of this scale? I've never built any Technic sets of this magnitude before. Thanks!

[@JayAyTeee]

I would be very thankful if you could explain how those lambo doors work because Im working on an aventador?

[@Unbrickme]

Yeah good idea I couple possibly make a video about that. Idk if it’ll be interesting tho

[@karlfarrugia2293]

Hello, very good video and very understandable! However, quick question. Can you keep upshifting that gearbox indefinitely (use same side of the lever to shift)? the gearbox will still go from 1st to 8th and then repeat, but there is nothing stopping you to use same lever to shift again at 8th? Thanks

[@Unbrickme]

Thank you very much! Yes you can infinitely shift up or down and it will just go in a loop

[@qfina]

@@Unbrickme Thanks, thats what i came here to find out, I thought mine was wrong in that it kept cycling

[@fsttrdl]

A wonderful video really explaining both in an understandable way and in-depth how this gearbox works. Thank you so much! I will be saving this to my LEGO playlist to watch more in the future.

[@Unbrickme]

Thank you very much I’m flattered!

[@philipc5151]

thanks for the explanation, i have both but don't understand the logic behind, and is good that you point out the differences between the two

[@S0L1D_]

Great video. I do have 2 questions about this gear box. (1) it seems moving the gear lever towards the front is actually the forward gear which is opposite of real cars. Is this expected on this set or I made a mistake in my build. (2) if I manually turn the black gear in the cockpit, I am basically only able to turn the wheels in 1st and 2nd gear. In higher gears there's great resistance that i feel like the axle is very stressed. Is this correct?

[@dustinbuckingham7723]

I am building mine now, and its not completed yet. It keeps jamming tho and seems to be very difficult to ratchet through the gears, then at times is seems its stuck between gears. Can you do an overview of how to properly "time" the linkages. i feel like this may be my problem.

[@mikev4089]

Can you please let me know how many miles per gallon does it get, and also what the best gear you would recommend for highway driving.

[@mehman9249]

I just want to say that I am totally new to the world of gearboxes and this just blew my mind

[@woollyrhinoceros6091]

I have a problem in mine between shifting gears, I think the gear box itself is working, the problem is in the paddle shifters keep slipping and they aren’t turning the cog that begins the shift between gears

[@Unbrickme]

Yeah the Bugatti and the Lamborghini paddle switchers are pretty bad. The Porsche’s paddles were fantastic

[@woollyrhinoceros6091]

I played around with it for a couple of minutes, and it’s better now, but definitely still not ideal, still at least I know it’s not just mine. Thanks tons.

[@woollyrhinoceros6091]

Unbrickme I Also love the fact that you are searching through the comments and actually answering me/other people with problems

[@Unbrickme]

Woolly Rhinoceros thanks! I try to reply to everyone

[@ZajdiPL]

Did you find any way to fix that? Im having the same issue and was thinking that maybe adding some more rubber bands may help it

[@eneaazzola414]

Great video!!! It really helps me to understood. I have only a question: at the same wheel rotation speed in 8 the engine runs slower and in first faster right? So when you have an higher gear ratio the engine runs slower than an lower gear ratio. Sorry for my English I’m Italian

[@Unbrickme]

Yes that’s correct

[@eneaazzola414]

@@Unbrickme ok thanks

[@MrAhmedShawi]

My differentials have a clicking noise when the two wheels rotate at different speeds…? Is that normal?

[@willjohnson8897]

On my Lamborghini I've only completed like the shassy but without the other differentials bit when I spin the differentials the same way they go really tough and you can't move them is there a reason for this or is it something to do with the gears because I haven't don't the gears yet. Please see this.

[@Unbrickme]

There's probably a piece that fell in the gearbox that is jamming something

[@thefossil.7935]

When do you think the ucs batmobile will retire? I will buy it in 2021 june...

[@Unbrickme]

I think you should be good then

[@thefossil.7935]

Unbrickme OH MY GOD thank you so much Oh my god my brain was... Oh, my I was very worried about it Thanks

[@thefossil.7935]

Unbrickme I have Another Question, will the creator expert's colorful box design will retire or all the modulars or cars that is creator expert will retire

[@thefossil.7935]

Like can we get modular buildings like bookshop 1 year later?

[@gamingbuildingandcubing5644]

This guy teaches like a nice teachers and asks if we understand( thought i didn't really understand the most but still great video). Oh and btw this is probably yhe first vid if seen from this channel and im subbing. I cant believe iy has been one year since the lego sian was first launched.

[@mndnjdkkdkemd]

Hi I love your video! I have problem that when push the car tire is not moving at all even try to move back forward. How I can fix this issue? Can help me?

[@zuanverreynne8301]

Anyone else have a shifting problem? It only makes half a shift then gets stuck, Ive checked that everything turns smooth and nothing is stuck but it keeps happening

[@JackChua-v8n]

Same

[@JackChua-v8n]

@unbrickme when i change the gear (4-5)and(1-8) it can't change.So what is the problem and how can i fix it ,cause it's my favorite set so i want to figure out 😢

[@starlael343]

I just finished my lambo, but i have an issue with the wheels, maybe some of u use to have the same problem, so if i spin 3 wheels to go to straight, (1 from the front and the ones in the back) they will spin well but the other one will go backwards, doesn’t matter what wheel it happens with all of them

[@2k4vGT]

Any suggestions on Forward/Gear box not working? N and R work as inteded but when i use the paddleshift its just a binding feel. never fully clicks over on the yellow knobs.

[@suikerpapas7830]

Im just half way in the build, and i when i spin te back gear all the wheels are turning exept one of the front tires, i think something is build wrong in the differential, and i dont know how to access it😬

[@matso815]

I have tried to find info about how the Bugatti gearbox works and its gear ratios ever since the Bugatti was released. Thank you for this and thank you for specifically addressing the differences between the two sets.

[@Bundaskenyer18]

So if i shift it past the 8th gear it's just like i shifted it in first?

[@mateoslab]

my gearbox gets stuck after a while in each direction? is this normal?

[@34powerman]

hi i just finished the motor bike today ducati kit. i went through the book step by step an it all works fine but there nice few bits left is this possible?? an i got two the same bits for a exauste for under the bike so i could only make one. i got the two same left bits only one right side bit would lego make a mistake like this?? im sure i went through the instruction book correctly i do not think it was possible i used the part some where else coz it would not have fitted else where. this was my first lego set so im not sure does this happen in sets

[@Unbrickme]

hello, usually you get a small handful of spare pieces in ever lego set. it's perfectly normal

[@dariomoro9641]

Hello, we finish assembling the lambo but... the transmission is stuck. When the front wheel turn forward, the rear wheel want to turn reverse. Any idea what I have done wrong?

[@dariomoro9641]

So fare I juste removed one of the drive shaft (front right wheel). Now the car is free and can movebut...:-( Frustrated. Can we flip a differential whitout disassembling everthing? Which one is the easier to get?

[@KryptonKr]

How do you tell the difference between the 1st gear and 8th? Without the power function?

[@ondracernoch6869]

Hello. Does it cycle back to 1 after 8 shifts? Or stops on the lowest/highest level? Thank you.

[@Unbrickme]

That’s correct it cycles back

[@eneaazzola414]

Only mine when I change between 4-5 or 8-1 have a bit of jam?

[@toast6320]

My gearbox is a little weird. When I change the speeds, every 4th shift is really stiff and requires a lot of force to change. I’m wondering if I did something wrong. If you have any helpful info I’d appreciate it

[@Unbrickme]

Don't worry that's normal since every 4th shift the second stepper mechanism engages to engage the multiplier gearbox

[@thomasschneiter2281]

hey, nice video. what kind of LEGO motor did you connect to the axis? an XL, L oder M motor?

[@zaxisontherun]

L motor

[@hasan-jamal]

I have a problem in my gearbox. When I am pushing the car forward, the rear tyres are going forward and front tyres are going forward. Is there are a way to fix it without breaking the car fully?

[@Unbrickme]

I’m not sure I understand what the problem is in your gearbox. You say when you roll the car forward both the front and back tires also go forward? So are you having issue putting the car in neutral?

[@XXXXXX-dy5fs]

At the stage just before the gearbox is brought up to the rear differential part. I try to turn the shafts but they dont want to rotate as if something is jamming. Is this normal or have I made a mistake?

[@hno777]

Great explanation on the gear box! Love the math

[@Unbrickme]

Thank you so much! This video took me a while to make!

[@vladcriss]

So how is the reverse gear working? You push the car forward and it goes back, or what it does?

[@Unbrickme]

Vladcriss the reverse gear is a direct output without having to go through the gearbox, and yeah the engine spins the opposite way, but it’s not really clearly visible

[@vladcriss]

@@Unbrickme thanks!

[@Unbrickme]

No problem

[@AbrahamGuerraRdz]

For some reason I can only change the shift paddles into 2 positions, wonder where I went wrong

[@zeph_za4011]

I've built the 1st box. But when I spin the axle in drive there is a lot of tension and it gets stuck. Is that right? Is it psobbly doing that because I still need to complete more of the build?

[@Unbrickme]

It should not get stuck. There will be tension, but it shouldn’t be so much to the point of getting stuck

[@zeph_za4011]

@@Unbrickme yeah it turns a bit and then gets stuck. Then if I try to keep turning it and let go, it whips backwards

[@zeph_za4011]

@@Unbrickme BRO I FOUND THE ISSUE! My differential was the wrong way around. Saw that mine was wrong after watching your vid. Amazing that such a small mistake can change everything, rather dissapointed in myself for that. But your video helped! Thank you so much

[@Unbrickme]

I’m glad you were able to resolve the issue and I’m glad my video helped

[@Cubemaster]

I've just done step 250 where you put on the second axle assembly. I wanted to play with the engine and transmission a bit, so I put the four wheels on and tried rolling it on the ground, but now I have encountered a problem where sometimes the gear shifting doesn't change the rate of the fake V12 firing. Also, in some gears I can move the wheels one way but the other way is locked up and strips the gears if I try to move them. It also sometimes locks up in both directions. I have undone step 250 and taken the second axle back off to try and isolate the problem but it did not change anything. I hope I explained my problem clearly enough. Any suggestions are appreciated!

[@juansanchez-hd4lo]

Me pasa igual con lo del motor, cuando pongo en marcha el V12 no siento que los pistones vayan a diferentes velocidades según cambio la marcha, no sé que pasa pero todo el mecanismo está bien construido, es el único problema que tengo

[@Jomari_Idioma]

I can finally sleep in peace knowing it's not only me that has a faulty Bugatti gear box hearing that made me tear up coz mine only works in reverse too. Just finished my sian and yea thank you for this video

[@Daniel-nh7xj]

Awesome video. High quality dude.

[@Unbrickme]

Thank you very much!

[@Unbrickme]

Wait what is lego postponing?

[@Oneto1.]

can you do one on the bugatti gearbox?

[@Lcxruns]

After watchin this i feel so stupid taking apart my bugatti and essentially destroying it to figure out why the car wouldnt be pushed before i saw this video about sequential transmission and only then realized what the paddles were for 3 years after building

[@exotic.yngsulz2370]

I just finished building mine legit just now and i dont know why but but the 2 back wheels always either spin opposite to the front 2 wheels. For example, if i push both back wheels as if the car was gun drive forwards, the front 2 wheels would spin the other way to try to "reverse" the car Like this v ⚙️v (back) ⚙️^ (front) Thats what happens every time.

[@gfields3286]

Thanks for the detailed video! My gear box wasn't working properly and you helped me find my problem.

[@neckslicer]

Great explanation! However I found that in my car the switching system does not function as shown in the video, and I am not able to find the reason for this error. The paddle can only move once which changes speed once but it cannot go again in the same direction, it can only be pushed from the other side. So pretty much it only switches between 2 speeds. I'm trying to figure out where the cause of this error is and how I can fix it, but it seems impossible to reach anything without having to tear down the car to get to the mechanism.

[@CoolStuffSometimes]

Yeh same my one is also doing that my one used to work

[@CoolStuffSometimes]

Actually I will sometime tomorrow have a video up on how to fix it I fixed my car

[@CoolStuffSometimes]

My car is like half done from me doing this and getting so far then noticing

[@CoolStuffSometimes]

Like the back end is almost fully done

[@rorro97_97]

Hello! Do you know why there are same pieces that have different shades of green? Nice explanation!!!

[@Unbrickme]

Manufacturing defect. Happened to most Lamborghinis from lego

[@charliebeeson2912]

Great video It was so easy to understand because you explained in detail 👍🏻

[@Unbrickme]

Thank you so much glad you liked it! Favorite technic set?

[@etmyt9416]

Great video! This is exactly what I was looking for!

[@danielporter2887]

Hi when I put it in drive neutral or reverse my all four wheels seize up can u do a video about this it needs to be addressed and I paid £260 so please let's gather more people so lego can fix this problem

[@imaster2675]

Hi I have a lambo lego buts the gear bow not working

[@nerdatheart85]

I love this! It all makes sense now! I have a question: is 1st gear supposed to be harder to turn? I had to build the gearbox a second time, because it was kinda rough turning it after I connected it to the rear differential, because it had A LOT of friction. Is that normal? I don’t remember 1st gear being that hard to turn on the Bugatti.

[@Unbrickme]

1st gear is always supposed to be harder to turn just like in real cars. If its excessive you should rebuild it

[@desmondshepard3823]

Hello from italy. Usually in real cars, if you pull right paddle,the gear goes up. I can't understand why when i pull the right paddle, gear goes down😭😭😭. Did i built gearbox or trasmission in reverse mode?

[@Unbrickme]

Keep in mind that 8th speed means the engine runs the slowest and the 1st speed makes it run the fastest.

[@h734802]

Mine in the 2nd and the 6th has a big frictions somewhere. I couldn't figure it out and I didn't want to disassemble the whole car. (No insta.) Any idea? I have only one idea: in 2nd (and mulltiplied 2nd) 10 more gears move actively than in 1st or 3rd, and the 4th is already slow enough and engine brake does't effect so much.

[@francischeung]

Same here! The 2nd and the 6th have bigger frictions than others. Have you solved the problem? If yes, how did you do?

[@h734802]

@@francischeung I think the main problem is deformation of pieces in time. I could carry out 2 kinds of solutions. 1) disassemble, (change a part), assemble. 2) WD40 (Or water because dust may increase the problem.) Actually I put WD40 first but it was too stinky inside the house, so I rinsed with water and put it outside to get dried.

[@h734802]

@@francischeung For some reason this video doesn't allow me to write link. Check out on Brickset "Big Beauty in Lime"

[@juansanchez-hd4lo]

​@@h734802 WD40? vamos hombre, son cauchos y plástico, no cadenas de acero 🤣, realmente lo que se debe hacer es poner un poco de vaselina en cada caucho.

[@h734802]

@@juansanchez-hd4lo, did it with silica grease. At least they turn but still something is not good....

[@alejandrograue781]

Very good unbrickme greetings from Mexico 🇲🇽. How did you find yours cause I think there is a problem with stock of LEGO in the states

[@alejandrograue781]

I already got mine is amazing

[@Unbrickme]

Wow awesome! I got mine because for a brief moment, my local lego store got a new batch of the Lamborghinis, and I got one. Did you also have the Bugatti and the Porsche before this?

[@alejandrograue781]

I don’t have the Bugatti but I want to have it before it retires . Right now I have the Land Rover which I think is the best value and the 911 rsr. Probably the Bugatti will be next month.

[@alejandrograue781]

@ unbrickme when do you think Bugatti retires??

[@Unbrickme]

@Preston Varner I believe that you should get the Bugatti, but please be very careful when assembling the gearbox of the bugatti. Also replace the clutch gear in the bugatti with a normal gear. The gearbox in the lamborghini has more refined pieces for some mechanisms and it gets stuck way less. Although if you prefer the bugatti aesthetically more, then get the bugatti

[@tuabuelaencuatrimotoconcro7995]

is the lego bugatti gearbox works the same? because i have one but i don’t know if i built it correct and wanna know how works hope yo can do a video nice work

[@Unbrickme]

yeah they work the same with the multiplier and the speeds 1-4. The gears are positioned a little differently, and the stepper mechanisms are more refined to make sure that the new 8 speed gearbox gets stuck much less

[@DennisEhv]

I've done something wrong at the time of the build. When I turn both back wheels forwards, the front wheels go backwards. Unfortunately I noticed that after when I finished the build. I hope that you have an idea where to look at? Hopefully a fast fix 😅

[@Unbrickme]

I don't think you can fix your model without taking it apart massively. I think you might've messed up some gears in the middle of the drivetrain. So I could split the model there and try to find the issue.

[@ZajdiPL]

You most likely wrongly connected your differentials - you should put one of them the other way round, unfortunately Im afraid this involves a lot of rebuilding at this stage

[@networkcrasher]

That’s exactly what I had to do with mine. One of them had the large ring gear on the driver side, the other was on the passenger side. They need to both be on the same side of the car. I fixed the front one but it requires a lot of disassembly

[@karlo0412]

@@ZajdiPL same thing happen to me

[@canadianlegofan4298]

Wow thank you I don't know why there's no one else who does this kind of video. If you have the rough terrain crane could you please do a video like that about it, I would really appreciate because it's so interesting and I never managed to decode how 1 motor can do 7 functions without owning it

[@Unbrickme]

I don't think I can make a video explaining that set but I can give you the gist of it. Essentially there's 7 different axles all connected to each different function. The axles have driving rings which can connect to either the clockwise direction or counterclockwise direction. When you engage the driving ring into the different gears, each independent function activates with the gearbox and just one motor

[@redcamilo]

Hi. I found 2 problems, the first was a “green” part with a little part in wrong way. Problem with changing gear. That problem is fixet now(I fount a video to this problem). but I have another problem with the tires. The tires rotate approximately only 2 centimeters in any direction and slow down, all four tires rotate in the same direction. but I do not understand why they stop and it is as they are a spring when they stop in any of the 2 directions. it returns to the opposite direction. My Sian can’t run more than 2 centimeters ☹

[@Unbrickme]

could be a variety of different causes. Here are some probable ones. 1) differentials are placed the wrong way, simply flip one of the differentials. 2) another lego piece fell into the gearbox and got stuck, causing the gearbox to jam, 3) gears in the gearbox are placed incorrectly

[@redcamilo]

@@Unbrickme thanks. I use your solution 2. I found a part was out of place and stop a gear. I will send you the fix when i discover how to put the part in the place. Thank you and good new year 2021.

[@MegaMike1]

Wow you should also make your own buggy!

[@Unbrickme]

Perhaps

[@Azureusz]

I think I did something wrong. Started building 5 days ago, removed some parts already (cannot completely disassemble it), every second speed spins without moving the pistons. No cogs are missing, everything had been realigned as the instructuions shows. What could be the problem?

[@Unbrickme]

It could be that some gears in the transmission itself are missing. After you finished building it, were any gears left on the table?

[@Azureusz]

​@@Unbrickme I had only one gear left. Yesterday I removed everything I can to see the gearbox, and compared with the instruction book, every gear was in place. So I guessed the remaining gear was an extra piece. If switched to reverse, everything works. but only if I switch to forward, it looks like every second speed not moves the pistons. Edit: figured out, the missing gear was really missing but not from the inside, but rather the outside of the gearbox. IThe missing gear was not seen in the bottom view, the right axle near the output, there is a gray gear after a long red connector, and next to it, outside of the frame there should be another gray one, that was missing.

[@inchhirn9544]

Can the Lamborghini be motorized? If so what would be needed?

[@Unbrickme]

At least two large motors and one servo. Optionally, you can try to motorize the gearbox

[@rubenlay610]

I'm really worried about messing up the gearbox when I build mine.

[@sosodizzy]

Yeah same

[@ns6q333]

I already messed mine

[@Hqnzz]

Can you help me my wheels are turning other round than the other

[@pooyamanoochehri2539]

So if the engine gear make 1 rotation the tire rotate 1.44 in gear 1 or not?

[@Unbrickme]

yes lets say that the current gear ratio in your car is 1.44. For every 1 full rotation of the engine, the wheels rotate 1.44 of full rotation.

[@Xx_alpha_Wolf_xX]

Hello so I have a problem I can only shift 1 gear do you know the problem?

[@Unbrickme]

can you try to describe the problem more?

[@Xx_alpha_Wolf_xX]

@@Unbrickme so i could only shift from 1'st 2'nd and back to first again but i fixed it it was one of these orange pieces that were put the wrong way

[@saraloug23]

Mines is coming tomorrow. I’m so excited, I feel like a kid on Christmas Eve!

[@godrole2481]

That cuz you are lucky

[@Liqwidbutterfly0925]

Just built mine yesterday, I love this set

[@shengyuanchen4272]

But why is it that my set's gearbox bottom view is a mirror image of yours while the top view is the same?

[@Unbrickme]

So that it’s easier to follow in the video. Would’ve been much harder to understand if it were not mirrored

[@jonneldayrit7145]

Hi I have problem with my gearbox

[@edwardjackowski2701]

Now I get it!!! Thanx a bunch

[@Unbrickme]

no problem! consider checking out more technic content from me!

[@zga042]

why's it technically a 16 speed? doesn't it cycle back to 1 after 8 shifts?

[@abcdruv6570]

If they were all 1:1 ratios then it would be 16, but they used different gears which changed the ratios so now it’s 8

[@newsmansuper2925]

how would you rate this gear box vs landrover?

[@Unbrickme]

i think this is better because it uses the paddle shifters behind the wheel. the landrover gearbox makes you turn something to switch gears, which is completely unrealistic of how real life transmissions work

[@jeremydumanski7584]

I was going to buy a switch, but the Lego website convinced me otherwise, and now I have a Lambo on the way!

[@Unbrickme]

Awesome

[@4chartown4]

My wheels move in opposite directions. Meaning it can't roll forward or back ward. Any tips?

[@Unbrickme]

Like front wheels and back wheels move in different directions? If that’s the case simply flip one of the differentials

[@4chartown4]

@@Unbrickme I have both differentials in the same orientation. I see if flipping them. Helps.

[@Unbrickme]

Flip only one of them, not both

[@sethbaus]

Is the under view mirrored? I think a better description would be that the bottom view is the bottom without the top. Otherwise the bottom view is the same as if you put a mirror under the bottom of the gearbox.

[@Unbrickme]

Yeah it’s mirrored, makes it easier to understand

[@ophirgrinshpon9446]

Very good video, and also comlex, do you know if the gearbox in your bugatti didnt work because you built it wrong or it didnt work because the modle wasnt design correctly? Btw do you recomend the buggati or the lamburghini and why?

[@Unbrickme]

I believe the gearbox in the bugatti didn't work because of the improper model design. There's a clutch gear, and there shouldn't be one. Clutch gears slip very easily, too easily. I reccomend the lamborghini because the gearbox is more refined, the model is newer, no clutch gears, and it looks cooler and has scissor doors.

[@lorenzomasarin1789]

Man this video is great, subscribed instantly

[@Unbrickme]

Thank you so much :)

[@AndreyAzimov]

Very technical review! Thanks for doing this! Have you tried to connect power function electric engine to a Lamborghini so you can drive it with a remote control?

[@Unbrickme]

Yes! And I’ve also tried to motorize the speed transmission gearbox! Unfortunately it is not ideal for motorization

[@AndreyAzimov]

@@Unbrickme wow cool, do you have a video?

[@Unbrickme]

I never posted a video on motorizing the Lamborghini because I was never able to successfully motorize the transmission and I don’t really have any spare control+ elements to use for the 90 degree rotation to switch the transmission. However, I do have videos on motorizing the concrete mixer truck 42112 and on motorizing the doms dodge charger