Kawasaki mechanical water seal replacementi er6f er6n Versys KLE650 Pt. 2

[@TheDeepPlanet]

Order your replacement seal here: amzn.to/3XupyKd Torque wrench: amzn.to/3XiysdA Socket adaptors: amzn.to/3XltpsH Silicone sealant: amzn.to/4cn4h9e Socket Set: amzn.to/3VJXWyf Allen key set: amzn.to/3RqK3mU

[@the1gabor]

I fixed my bike guided by this video. All i have to say that you need a 25mm 12 point socket to push in the new water seal, not the 27mm. It fits it perfectly, i had no worries that i will destroy the new seal. Also you can use the other side of the 25mm socket to push out the old water seal. Good luck for all of you, if you are careful and follow this video step by step you will be fine,

[@TheDeepPlanet]

Thanks for the comment. I agree. I had that thought that the 27mm was just a bit too big. When I made this, I was surprised how quick and easy it is. Safe riding!

[@maxhofmann6993]

We need more videos bro, your awesome,keep it up. Chumps like us hate to read service manuals :-D

[@TheDeepPlanet]

More to come soon! Just clearing out the workshop...

[@TheDeepPlanet]

Thanks. So good to get the encouragement 🙂

[@maxhofmann6993]

Awesome, cant wait bud.

[@kblood5189]

Awesome video I followed through for the Vulcan S 650 but it's still leaking coolant

[@TheDeepPlanet]

Hi K blood. Did you replace the seals?

[@kblood5189]

@@TheDeepPlanet Yes I did I stopped leaking after a few hrs

[@borricodimension]

You save my day. Thank you.

[@TheDeepPlanet]

Glad to help. Ride safe. 😎

[@thangnguyen-tf4yo]

bisakah Anda memberi tahu saya cara melepas pelat tempat segel mekanis masuk ke dalamnya? Saya melihat Anda gemetar lalu turun. Saya menyukai apa yang Anda lakukan di video tetapi tidak berhasil. Terima kasih atas bantuan Anda.

[@milandlouhy7995]

Good video man (y)

[@TheDeepPlanet]

Thanks!!

[@edenec93]

My plate is not coming off that easily. Can I use something to wedge and pry it off?

[@TheDeepPlanet]

Hi there. I have a hardwood timber wedge with a very thin point that I use. You might be able to use a plastic door wedge or something like that...

[@jordanmeya66]

should the oil seal be put at the bottom?

[@TheDeepPlanet]

Hi Jordan. Could you explain what you mean by that? Sorry I'm not really sure what you mean?

[@greenshifter8452]

Hello I need halp❗ model: Z1000 2003 YEARS I replace all seals in the water pump, but The oil is still leaking From the emergency shaft... How to solve it 1)new seals 2)new water pump What is the solution🤯

[@TheDeepPlanet]

Does the z1000 have a balance shaft? Did you lubricate all the seals? Did you ensure each piece was flush before you tightened? Did you use a torque wrench and torque to spec according to the workshop manual?

[@jasonwhat8946]

I changed out the seals, but there’s still oil seeping out the weeping hole. Any thoughts? Do I need to change something else out?

[@TheDeepPlanet]

Hi Jason. I've responded to your other message. Good luck! 😎

[@Daspm]

Hello I want to replace the mechanical water seal of my 2018 ninja 650. Should I drain coolant(which you call water) and engine oil before repacing? thanks.

[@Daspm]

Oh, there's part 1.

[@TheDeepPlanet]

Yes. You don't need to drain the oil though. Check out my latest video on this topic. It's much clearer and shorter...

[@TheDeepPlanet]

Just the coolant.

[@solonpogiatzis2368]

Hello. I bought an er6 n 2008 and it has a minor oil leak from the mechanical seal. If i dont fix it what is going to happen?

[@TheDeepPlanet]

It will keep leaking. Eventually it may cause oil and coolant to mix.

[@solonpogiatzis2368]

@@TheDeepPlanet Thank you. I have already order the parts and your video will guide me to fix it. A torque wrench 1/4" will make the job and also for the oil cap?

[@TheDeepPlanet]

Good luck. Yes, all the tools needed are shown.

[@TheDeepPlanet]

It would be a good idea to watch my 2020 version for this as it is shorter and clearer.

[@z-juan4854]

What exactly happens? Does it mix with the engine oil?

[@TheDeepPlanet]

Hi. No, as the seal starts to fail the oil comes out of the weep hole at the bottom of the pump housing. Eventually, I think the oil and coolant will mix...

[@z-juan4854]

Thank you. Had the same exact problem with my z1000 right now. Shaft Oil seal and water seal needs replacement,. Oil turned coffee color and coolant had oil in it.

[@patricepatrice9089]

Bro nice for zx10r it is the same?

[@TheDeepPlanet]

Cheers mate! I haven't worked on a zx10r . The pump looks different... probably similar process though...

[@patricepatrice9089]

@@TheDeepPlanet thanks