Mechanism BFG-Bi Folding Gate DIY kit. For gates of the Accordion/Book system. A short video manual.

Are you planning to make Bi Folding Gate such as an "Accordion / Book" and do not know how to do it?
I offer a series of mechanisms BFG - Bi Folding Gate for independent construction of this type of gate.
This gate design takes up half the space in the yard compared to conventional gates!
Ideal solution for townhouses and small yards! The car can be parked very close to the closed gate.
Mechanisms are made of galvanized steel
Available in white or yellow zinc.
I offer 5 types of mechanisms for the self-construction of swing folding gates of the "accordion/book" type.
BFG-Mechanisms are available for order on my App/Website:
bfg-diy-kit-mechanism.glideap...
Z-system.pp.ua
WhatsApp, Viber, Telegram: [phone]
Specify the availability and cost ... I invite masters to cooperate, there are discounts for professionals.
__________
BFG 30-50/BFG 50-80
for installation on the backplane of the door at any height:
- for opening up to 7 m
- for leaf thicknesses 30-50 or 50-80 mm
- gate opening angle adjustment + installation instructions
- easy automation
- for axis from 25-40 mm
- a gap between shutters from 0-10 mm
The mechanism BFG 30-50 and BFG 50-80 are installed on the rear surface of the gate at any height, the numbers in the name determine the thickness of the leaves on which the mechanism can be installed. The first is from 30mm to 50mm, suitable for small gates made of 30*30, 40*40 or even 50*50 pipe. Pay attention to the thickness of the door including the lining! The new set BFG 50-80 is suitable for massive, large gates with leaf thicknesses from 50mm to 80mm! In this mechanism, axles with a diameter of 10 mm are reinforced with hardened bolts of the 8th hardness class. In other mechanisms, 8mm bolts are also used, also of the 8th grade of hardness.
__________
BFG UNI
Universal mechanism with top/bottom installation from the end of the gate:
- for opening up to 7 m
- for sashes of any thickness
- gate opening angle adjustment + installation instructions
- easy automation
- for axis from 25-40 mm
- a gap between shutters from 0-10 mm
The BFG Uni mechanism is universal as it is suitable for leaf thicknesses from 20 to 80mm! The peculiarity of its installation is from the end of the gate from above or below. This mechanism is the least conspicuous and has the most diminutive dimensions. Ideal for installation on gates that open outwards. It is best to mount it from above since in this position access to the mechanism of outsiders will be difficult.
__________
BFG Mini
Overview of the mechanism • Gear mechanism BFG-Min... , • BFG Mini-механизм для ...
The compact mechanism on gears without visible levers and a bracket on a pole for installation from the top of the gate end
-for opening up to 7 m
- for sash thicknesses from 50 mm
- for axis 25 mm
- a gap between shutters from 5-10 mm
_________
BFG Indi
Hidden Mechanism for OPENING OUTSIDE gate Accordion/Book. Indian system BFG-Indi / DIY KIT - • Скрытый Механизм для О...
An example of opening a gate using the BFG Uni mechanism. Installation of telescopic and lever drives on outward opening doors • BFG механізми для відк...
mechanism with installation from above / below from the end of the gate:
- for opening up to 7 m
- for sashes of any thickness
- gate opening angle adjustment + installation instructions
- easy automation
- for axis from 25-40 mm
- a gap between shutters from 0-10 mm
Mechanisms provide the folding of shutters at the manual and automated opening of the gate.
See examples of using mechanisms on examples from my customers :)
To automate the gate, use a linear-telescopic or lever drive for swing gates.
The lever drive allows you to automate the folding gate Accordion / Book when opening outwards. Installing the drive on the inside of the gate. Video examples.
As always, I will be glad to answer your questions and help implement your ideas!
Come to my New English channel: / @alexanderalisglobal
My Mainchannel: / @alexander_alis
+ Examples of work from my customers for 2021-2022 + Merch from my channel - • Механізм для воріт Гар...
+Examples of installation on the gate + automation • Механизм для Складных ...
+ Swing folding gates to the yard of the Accordion type: • Распашные складные вор...
+Overview of mechanisms and installation instructions
• Механизм для постройки...
+ BFG Mini review of the compact mechanism on gears • BFG Mini-механизм для ...
I am very grateful to all the customers who provided their videos)
I also invite cooperation masters in the manufacture of metal structures.
In my videos, I showed the magnificent works of masters from Ukraine, Israel, Kazakhstan and Serbia - if you live with them in the same city - please contact them for gate manufacturing!
For me - these are your orders, for you - advertising your services on my channel!
#Bifoldinggate,#Bifoldinggatemechanism,#BFGmechanism,#BFGUni,#BFG3050,#BFG5080, #BFGMINI,#bfgindi

[@alexander_alis]

🛒 You can order mechanisms on my App bfg-diy-kit-mechanism.glideapp.io or on eBay.To search, type the names of mechanisms - BFG UNI/30-50/50-80/MINI/INDI or direct link: www.ebay.com/itm/334657113371 You can view all the characteristics and installation features of the BFG series mechanisms by scanning the QR code and following the link to the application/site bfg-diy-kit-mechanism.glideapp.io. ☎ My Viber, WhatsApp, and Telegram: [phone] Look at the latest examples of installing the BFG Indy and BFG Uni mechanisms for opening the doors outward kzbin.info/www/bejne/iITZmpqHna1mmpo kzbin.info/www/bejne/pqG0eIuqgtWrh9U

[@alewiena]

Как необычно слушать на английском! Большое спасибо за видео, мои друзья в Америке теперь смогут тоже понять о чем речь! 🤘

[@alexander_alis]

Thanks a lot! I did my best!

[@t1m3l0rd]

My man you are life saver. I’ve been looking this for years.

[@alexander_alis]

Oh my God - please)))

[@richardainley9220]

Hi Alexander, greetings from the UK and congratulations on your first English video. Great content and very clear instructions. Keep up the good work. Warm Regards, Rich

[@alexander_alis]

Thank you very much for appreciating my work! It's nice that modern information technologies make the world clearer and more convenient! Glad to cooperate!

Xin chào Alexander Alis! Chia sẻ video rất tuyệt vời, cám ơn bạn. Chúc bạn và gia đình luôn mạnh khỏe và bình an. Rất vui được đồng hành cùng bạn.

[@alexander_alis]

Cảm ơn bạn rất nhiều vì đã đánh giá cao công việc của tôi và những lời tốt đẹp dành cho tôi và gia đình tôi! Chúc các bạn xem vui vẻ, tôi hy vọng các báo cáo video của tôi sẽ hữu ích cho bạn! Tôi chưa có khách hàng nào từ Việt Nam nhưng tôi nghĩ mọi thứ còn ở phía trước... Chúc bạn may mắn, sức khỏe, thịnh vượng và lời chào từ Ukraine!

[@jarkstt]

Can it work on gates that fold outwards of the property? Also, this means the automation will have a gate leaf folding onto it, is there anyway to stop the second leaf from slamming onto the automation?

[@alexander_alis]

Hello! I'm glad that you liked my work) You guessed the theme of my last two videos))) They contain examples of finished gates - I highly recommend looking at them. And just about the features of installation between the sashes. Include subtitles with translation. Pay attention to how the lever motor is installed - above the mechanism. kzbin.info/www/bejne/iITZmpqHna1mmpo Another video shows an example with a telescopic drive. To prevent it from being pinched between the sashes, a cutout is provided at the end of the second sashes. If you want it not to be visible from the street, you should hide it with sheathing from the outside. kzbin.info/www/bejne/pqG0eIuqgtWrh9U Subscribe to the channel and stay up to date with new products) Where are you from?

[@livegreen1055]

hi i am Madhav from India. Could you share me a video for tri-folding gate mechanism. Gate works in motor

[@alexander_alis]

Hello Madhav! Do you mean this gate? kzbin.info/www/bejne/iGOWdaymaJl7aac There are 3 doors on both sides. The gates are automated. The BFG Uni mechanism and a special mechanism for the third leaf were used.

[@Jenik733]

Hello, this is exactly the system I need. I just have a question, how wide can the gate be for one mechanism? I would need to open a 4.5m wide (2.25m after folding) gate out of the garden with this nechamism on one side, is it possible to use your system? Is the assembly difficult and do I need something else for the mechanism? I am also attaching a photo of the entrance, how the gate should be folded. thank you very much for your help.

[@alexander_alis]

Hello! Glad you liked my work) So, you only need half the kit (left or right) to open the gate on one side of a 4.5m wide opening. Yes it is possible. But keep in mind that this is a large opening and the first sash should be especially securely fastened to a pole or mounting pipe with three hinges. The first sash should be made with a cross-section of at least 60*60*3mm and should be made ventilated to reduce wind resistance. The second sash should be made lighter by taking a pipe 60*60*2mm thick. The pillars should be securely strengthened in a strong foundation. The pillars have a cross section of 120*120*4-6mm or can be made from several pipes welded together. Pour concrete inside - then it will be absolutely stable - like in this example with doors on one side - the first fragment has an opening width of 7.5 m! Here you should use the most powerful mechanism BFG 50-80. The cost of half the set is $110 + shipping to your country. Where are you from? The mechanism is available. Unfortunately, it is not possible to add photos to KZbin. I didn't see your opening. Write to me on WhatsApp or Viber or Telegram [phone].

[@alexander_alis]

kzbin.info/www/bejne/gnfXha1qhdh9fqs

[@alexander_alis]

kzbin.info/www/bejne/pqG0eIuqgtWrh9U Here is an example on one side, although it opens outwards and a different mechanism is used - for example kzbin.info/www/bejne/bGmtoHiqnr-jmbc There are examples here on one side and in the second video there is also an example of a heavy gate in the opening kzbin.info/www/bejne/bGmtoHiqnr-jmbc?t=630 3.8 m sheathed on both sides with corrugated sheets, the gate is high and heavy. The customer played it safe and installed a pair of BFG 50-80 mechanisms at the top and bottom of the door) The gate has been working for 3 years without problems.

[@alexander_alis]

I just saw that you wrote to me on eBay) You are from Ireland - correct? Yes, this is my ad. If you want to continue the discussion on eBay, let me know. Here you will purchase a mechanism without a site commission, and to be honest, this is better for me too, since I will receive the entire amount without deductions and on time. Since eBay delays payments for 1 month after the transaction and with I also get a commission. Shipping to Ireland will cost $78. Total: 110+78=188 dollars. Delivery time is just over 2 weeks. For example, in the UK it takes exactly this long.

[@user-jz1ik7er7j]

Merhaba Alexander, kapıların çok güzel, işlevsel ve en önemlisi çok çeşitli! Yaklaşımınızı ve yaratıcılığınızı seviyoruz! Mekanizmayı ve kapıyı nasıl sipariş edebilirim? Türkiye'ye teslimat var mı? Kapıyı kendimiz monte edebilir miyiz yoksa ustayı mı davet etmemiz gerekiyor?

[@alexander_alis]

Vay! Türkiyeli misin! Mekanizmaları sitenizde yayınladım www.sahibinden.com/ilan/ikinci-el-ve-sifir-alisveris-bahce-yapi-market-yapi-malzemeleri-akordeon-kitap-tipi-katlanir-kapi-uretimi -icin-mekanizma-1018099835/detay/ Yardımcı olmaktan memnuniyet duyarım. İşte Türkiye'ye ücretsiz kargo ile fiyat. [phone] messenger iletişim bilgilerinden bana yazın. Kapınızın özelliklerini belirtip, açılım fotoğrafına sahip olabilirsiniz. Evet, herhangi bir usta kaynakçı mekanizmayı kurabilir. Alternatif olarak kapıdaki mekanizmayı cıvatalarla da sabitleyebilirsiniz. Hangi sehirdensin?

[@starikxo]

Приветствую, Александр!

[@alexander_alis]

HI! Это мое первое видео на английском) Для американской аудитории.

[@starikxo]

@@alexander_alis Александр, я понял на кого рассчитано видео. У Американцев в частном секторе заборов как обычно нет, даже калиток. Удачи! Смотрю твои видео и искренне желаю тебе всего самого хорошего.

[@alexander_alis]

Спасибо Большое) Я ценю это! Как видите все у них есть и заборы и ворота) Это только в фильмах показывают образцовые городки. Вообще Америка разная очень. Это из Калифорнии - клиент)

[@starikxo]

@@alexander_alis Понятно! На связи!

[@alexander_alis]

Watch the NEWEST video from my customers with the BFG INDI mechanism announced in the current video! A specially designed hidden mounting mechanism for Opening Gates Outward with installation from above/bottom at the end of the gate. For safety reasons and the impossibility of access from the street, all elements of the mechanism are located inside the yard. Installation examples kzbin.info/www/bejne/iITZmpqHna1mmpo An example of opening a gate using the BFG Uni mechanism. Installation of telescopic and lever drives on outward opening doors kzbin.info/www/bejne/pqG0eIuqgtWrh9U

[@alexander_alis]

Hello colleagues! I’m starting the new season with spring discounts on BFG mechanisms 30-50/50-80/Uni/Indi -10% of the retail price of $200. That is, minus 20 dollars, the price for you is 180 $! All mechanisms are available. There is a $25 discount on the BFG Mini mechanism, the retail price is $375, that is, for craftsmen it will be $350! The offer is valid until May 15th. My website: bfg-diy-kit-mechanism.glideapp.io/dl/375e23/M/85e47a I invite you to look at the latest examples of using the new BFG Indi concealed lever mechanism for opening gates outward. Access to the mechanism, as with standard inward opening systems, is from the yard, which eliminates unauthorized access to the mechanism! kzbin.info/www/bejne/iITZmpqHna1mmpo For an example of opening outwards and an interesting solution for installing a telescopic motor, see here: kzbin.info/www/bejne/pqG0eIuqgtWrh9U An example of using a T-profile for installing large gates: kzbin.info/www/bejne/sIe7eHx5i6ycfaM I’m preparing new videos on the topic of threshold-free gates/accordion doors/book gates made from a separate fabric! Two more solutions differ from the previous one: kzbin.info/www/bejne/a6CTnIhsjruDm9E I would be grateful for your cooperation, please share your work! I will be happy to advertise you on my channel! I wish you generous clients and good luck! Alexander - Mechanisms from the DIY BiFoldGate kit.

[@user-rc9bw7hr9k]

Вас викрали?

[@alexander_alis]

AHahahhaha!!! ))))) Розширюю аудиторію! Вже є перші замовники зі Штатів) Дякую за класний коммент!

[@alexander_alis]

Спочатку озвучив самочтійно, своїм голосом. Але дочка послухала і забракувала мій "індійський" акцент 😂🤣😆 Тож найняв робота, а він озвучив бездоганно!