Racerstar 2500KV motor thrust test | 1000 Kv motor thrust test | DIY Test rig

[@jagadeeshwarim8318]

Bro what an explanation u just gained a subscriber

[@MechNinja]

Bro this is nothing, please check my new videos 😊😊😊

[@shouryagoel6835]

Bro I think u r better than other drone youtubers an it's not a joke

[@MechNinja]

Thanks brother...keep supporting me.... I have way more complex projects coming on the way with full explanation......😊😊 So thanks for watching and don't forget to subscribe... And do share it... Thankyou

[@shouryagoel6835]

Sure bro I have subscribed u for my 3 accounts

[@shouryagoel6835]

And waiting for your other videos

[@MechNinja]

Thanks brother....🤗🤗

[@santhoshgattu8267]

Hello guys , these videos includes a lot of information and very helpful to students. Could you please try to include CFM (cubic feet per minute) as an airflow indicator for every type of fan you described in all the videos. Thank you, I hope you might work on the CFM

[@MechNinja]

Thankyou so much for watching it...and don't forget to subscribe

[@saraheart8527]

Not a useful measurement unless you are doing ducted fans. Thrust is the force measurement needed.

[@niranjan2726]

Wow bro thats so informative. Thanks.

[@deepbhatti9583]

good one. why don't you make a video of all the motors with different KV and different pitch propellers and share the test results? it would be so informative to all.

[@MechNinja]

I will definitely share it bro but along with the passage of time. I mostly share the stuff which will be helpful in my upcoming videos...As I taken the reference of this video in my "80 mm EDF video". Similarly there is so information to share with you all in my upcoming videos. So don't forget to subscribe...and also do check my other videos like mecanum wheel robot, 80 mm EDF and many more. They are good videos too...😊😊

[@somyagupta4779]

Very Informative ❤️👍

[@MechNinja]

😊😊😊

[@ecbmanikandan]

Njoyed Alot Da Machaaan..!

[@ecbmanikandan]

Machi, Its 2am, Still Awake.?

[@MechNinja]

Yes....😅😅

[@ecbmanikandan]

@@MechNinja I Think You Are Doing Some R & D For Next Video.,!

[@ecbmanikandan]

I Have one Very Simple Question, Why Table Fans Propellor not Creating Much Thrust Like Other 2 blade Propellors.? Is it Because of Rpm or Propellor Design Machi..!

[@MechNinja]

Both the things. Their propellers are meant to be designed in such a way that they will only push the little amount of air to provide the comfort and also their rpm is low.

[@dangermines5914]

Nice And Very helpful video Sir

[@kendelacruz5400]

5:56 i very love it when i hear this

[@MechNinja]

Thankyou for watching and don't forget to subscribe 😊😊😊

[@savneetsinghrairai6823]

I have used big twin 10" prop with 2212 1000kV was ossum

[@MechNinja]

I have also used 10 Inch prop with my 1000 kv motor

[@HakkiOgrt]

Safe testing tool , nice.

[@MechNinja]

Thanks...😊...Stay tuned for more ....

[@ARGON023]

THANKS.............................................!!!

[@MechNinja]

Your welcome and don't forget to subscribe and check my new videos too 😊😊😊

[@itsrairamones]

Nice Video comparison bro I just bought my racestar brushless motor for an experimental rc airplane

[@rajatyadav4062]

Nice vdo & well explained 👍

[@MechNinja]

Thanks bro

[@loodwich]

I can use the Racerstar BR2205 with 6inch propellers, but because my normal pressure is only 790hPa. Also with a 4S battery.

[@MechNinja]

If it's recommended to use a 6 Inch propeller than its better, but if not then the motor will draw much current and time of flight will be less. But If your requirements suits the 6 Inch prop then go for it.

[@MechNinja]

And don't forget to subscribe 🙂🙂🙂🙂

[@loodwich]

@@MechNinja I already did yesterday. This is the third video that I saw from you, and I watched it all to the finish so a subscription is important, I want to know where are you moving to. And I use those motors and those propellers in a quadcopter FPV drone, so I need the punch some times at this altitude, only 15 min of autonomy with a 4S 1500mAh

[@MechNinja]

May be you are having a racing drone..... Well I am a mechanical engineer and following my passion...🙂🙂🙂 So thanks for watching and don't forget to subscribe 😊😊😊

[@marcosfeitosa3383]

The pulley relieves the force that is applied on the scale by 50%

[@MechNinja]

No bro it's not......I am using a single string so the force applied will be same.....If I had used two string at one side and one at the other ....than it would have been twice. Hope you understand....😊😊😊 Thanks for watching and don't forget to subscribe 😊😊😊😊

[@simplebest113]

Doesn't mean to be offensive but you should give all parts some name. I'm literally confused about which part is going where, I'm figuring it out by watching the finished rig.

[@MechNinja]

😅😅😅 ok bro ..from next time I will name everything....😅😅

[@kelleysimonds5945]

Lose the background music, very distracting.

[@MechNinja]

Ok ....from next tym 😊😊😊 Thankyou for watching and don't forget to subscribe 😊😊😊

[@nikhilkulal2520]

Sir Which one is Carry more weight

[@dronepilot260rc]

Nice!

[@MechNinja]

Your welcome bro.....and pls check my new video of 80 mm EDF. It's so knowledgeable.... So thanks for watching and don't forget to subscribe 😊😊😊😊

[@restorationofdirty]

Amazing 🌟❤

[@MechNinja]

Thankyou so much....and don't forget to subscribe 😊😊😊

[@englishboy10]

Excellent 💖

[@MechNinja]

Thankyou so much.... don't forget to subscribe 😊😊😊

[@tobins6800]

What application are you going to use these on? Also, have you tried any other propeller designs?

[@MechNinja]

Well it was a test for my new and old motors. Because I want to compare the actual thrust of the motor with its performance chart. And I need the results because my future projects are complicated and so compact that these parameters will play an important role in designing that. So I shared the results with you all. And yes I have used different propellers because racerstar 2500 kv motor was designed for 5 Inch propeller but I have tested it with 6 Inch too. And 1000 kv motor for 10 Inch but I have tested it with 8 Inch....and I don't fee like to use more propellers on it because these sets were common. So hope you liked my video...so thanks for watching and don't forget to subscribe... More cool stuff is coming on the way...☺️☺️

[@tobins6800]

@@MechNinja you're obviously an engineer. What's commercially available isn't always the most efficient. You also have a 3d printer, and that was also the short way of asking if you had access to research and knowledge that the basic public doesn't have, or, have aggregated said knowledge from the multitudes of sources out there. For instance, the noctua fans have an extremely efficient way of moving air around and are some of the quietest designs. I do wonder how long it will take to get aluminum and iron based batteries for things like this. What has been promised for performance will be exciting for projects like this.

[@MechNinja]

Thanks for your support bro...I appreciate it ...🙂🙂 We'll I have way more knowledge to share with you all and will definitely share it in upcoming days..... So till than enjoy my video....😊😊😊 Thanks

[@merxellus1456]

Bro a question.. could a motor fly a plane whos total airplane weighs greater then the trust produce? Example a motor with trust 500 gram flies an rc plane with 600grams? I like to know the minimum thrust required to fly an airplane in Trust to weight ratio..

[@MechNinja]

Yes definitely it can fly......as the thrust is produced by wings...and the motor helps in speeding the plane. Make sure you do not fly in vertical position.....or it will come down....😊😊😊 Don't forget to subscribe....😊😊😊

[@merxellus1456]

@@MechNinja i see thanku Bro.. Always wondered this question.. U deserved a subscribe

[@vividprimevision]

*Bro but the time is important.Can you test fpv motors 2 blade vs 3 blade vs 4 blade vs 5 blade?*

[@MechNinja]

The motors I have tested are fpv motors or racing drones motor.

[@peterlau291]

Can you design additional duct housing to the propellers? So we can know if can increase efficiency.

[@MechNinja]

Yes sure I can.

[@peterlau291]

@@MechNinja thanks, Ninja

[@MechNinja]

Your welcome...🙂🙂 My new video will have so much of R&D... So thanks for watching and don't forget to subscribe 😊😊😊😊

[@sergeyzbroy6825]

Даже не смотрел ролик после прочтения заголовка-2500kv или kw?

[@gtaitbiz7787]

would a 2500kv motor be enough to lift a tarot frame?

[@MechNinja]

Each motor give us a max thrust of 900 gm.....So you can calculate now...😊😊😊 And don't forget to subscribe 😊😊😊

[@gtaitbiz7787]

@@MechNinja do you know if a 4 in one will work with a naza? i have 2 don't want to throw it out

[@ashiknabil4106]

Bro which is best motor to produce 25kg of thrust ?

[@MechNinja]

25 kg thrust is way more for electric ducted fan (EDF). The max thrust which a commerical available EDF can produce is 12 to 13 kg max. So you need to use two of them. But the problem will be the battery size because these EDF consume much current. And also if there is no such requirement.of EDF than you can go for T motors. T motors has a lot of thrusts. It can easily provide you 25 kg with 24 Inch propeller but it is costly. And if you are planning to design a manned drone that I will suggest you to first make its miniature version and find you the problems. Hope you get it and if you'll face any problem then do comment. Thanks for watching and don't forget to subscribe 😊😊😊😊

[@ashiknabil4106]

@@MechNinja Thnx bro

[@MechNinja]

Your welcome..... Subscribe to my channel for more videos...😊😊

[@manuelverdugo1737]

With what speed, with what type of propeller, for what?

[@sumantdas2447]

Bro i am going to make a rc plane... With 1000kv motor with 8 in prop.. Can i use a 7.4v lipo battery 1000mah for it?

[@MechNinja]

Yes you can go for it...but don't make it heavy..... Don't forget to subscribe 😊😊😊

[@sumantdas2447]

@@MechNinja thanks bro. I have already subscribed you😀

[@jaypatel6801]

These small motors draw much more current than an normal induction 3phase motor according to their size

[@saraheart8527]

Because of the low voltage, they would naturally have to have a high Amp rating to get much Force/Thrust

[@nikhilkulal2520]

Can i get some information about readytosky 920kv motor How much weight can carry this motor

[@MechNinja]

Well I have not used that motor...but according to its kV rating...it might give you around 900 gm + thrust. But i am not sure...you need to check it's thrust chart

[@tonesdrones7395]

I don't know why no one is talking about the built-in esc motors from sky rc

[@MechNinja]

I don't understand your point...😅😅😅

[@jesusbecerra2059]

Can I use a 920 kv brushless motor and put gears on it so that I can increase the speed of the propeller, is it similar to the system used by (commercial) toy drones?

[@JohnRoberts-ly5eu]

Hi, how did you connect the bullet connector?

[@MechNinja]

I have soldered it using soldering iron

[@TargetedAds]

hey im going to use a 2500kv and 40 esc for a plane and was wondering what is the c rating for the Lipo battery?

[@saraheart8527]

You are supposed to know that by the manufacturer's specs. And every battery made has it's own C rating depending on the quality of the materials used, as well as the quality of the build by the battery company. These companies are notorious for over-rating the crap out of the battery's to impress you and get you to buy them.

[@MechNinja]

The C rating are mentioned on the battery itself.... And thankyou for watching the video and don't forget to subscribe 😊😊😊😊

[@50megaton]

Hello boss, you used Readytosky 40a esc I too have these, do u have any idea about programming Readytosky 40a esc?

[@karan7848]

Is ideal thrust weight of the arm?

[@agiel149]

Hey man, im gonna use that 2500kv and 40a esc setup on my zmr250 frame is that gonna fit in the arm or not?

[@zecsabbath7160]

like >>>>>>>>

[@abipaily228]

1000 kv , 6045 tri blade how much trhust ?

[@MechNinja]

6 Inch propeller is not suited for the 1000 kv motor because it has low rpm and high torque. 6 Inch propeller need high rpm motor so I have used a 2500 kv for it. Hence there's no use for using 1000 kv with 6045 Hope you got my point. And thanks for watching and don't forget to subscribe 😊😊😊😊

[@thesimpleliving332]

1000 kv motor and 6045 tri blade props how much thrust ?

[@oprekboy9693]

Smaller diameter of blade make more efficient. think because of the difference in moment of inertia... CMIIW..🤔

[@luissouza5501]

Show!!!!

[@mr.pappufacts8219]

Moter kaha se purches kare

[@MechNinja]

China se toh band ho gya hai aana....aur ye wali type mushkil se milegi India me....toh better rahega same KV ki koi aur motor lelo

[@mr.pappufacts8219]

Okk

[@arshikhan6259]

How did you come up with the ideal thrust as 95 grams?

[@MechNinja]

Ideal thrust is the dead weight of the arm to lift it to the height till the arm reach the horizontal position. I have calculated using the spring balance. Don't forget to subscribe 😊😊😊😊

[@MrGreen6101]

Asada

[@jyotiamargrs3625]

Amar singh

[@MechNinja]

Thankyou for watching the video and don't forget to subscribe 😊😊😊😊

[@aju5405]

Hi.. I need one help

[@MechNinja]

Mail me at [e-mail]

[@aju5405]

Is 1038 propeller ok for 1000kv a2212 motor?

[@MechNinja]

Yes they are good....but try using 1045 propeller

[@aju5405]

@@MechNinja tried using 1045 propeller on fish rc plane. Plane is not stable at all.if I give more thrust flies vertically. When used 1038 performance is much better than 1045

[@aju5405]

In the video you showed 2207 motor, 2212 motor.both have around 600g thrust. Then what is the difference between these two? I heard that 1045 propeller is used in heavier plane models

[@saraheart8527]

1) you are fighting gravity with this method, and 2)changing the angle of the force. I don't believe this will be a very accurate test.

[@MechNinja]

Every drone is fighting gravity...so do we.....

[@MechNinja]

I took the reading at the time when the motor is horizontal....and I think, that is the ideal case when we need to calculate the thrust.....

[@ed-7]

If he had an adjustable weight opposite the pivot point, to counterbalance the motor/prop combo until the ensemble was resting horizontally, just as the string became taught, the result would be more accurate.

[@MechNinja]

Since I am calculating the ideal thrust and adding it in the final result, so the counter balance method is eliminated..... But in my upcoming videos i am using more accurate rig to test the thrust. Thankyou for watching the video and don't forget to subscribe 😊😊😊

[@saraheart8527]

@@MechNinja True, but I am calculating for a fixed wing, Besides that, all manufacturers do not calculate thrust agaist gravity, they are calculating the total horizontal thrust, THAT is the standard.

[@Leader-ni9mk]

please talk in hindi agar nhi aati tho no problem

[@MechNinja]

Bus bhai usk liye Hindi wala channel aane wala h....vo bhi bhut sare unique videos k sath... Bus keep supporting Thankyou bhai

[@MdShimul-js6co]

0

[@bgbharatgaming7549]

Hindi bol liya kro English kyun bole ho

[@user-gg7wh5fg3j]

一目了然

[@nkokenogebangmatt8372]

blablabla waise of time from real ninja

[@carlosantangelo3599]

This test is not correct does not take into account the different weight of the engines and propellers

[@MechNinja]

How it's not correct.... Could you explain a bit further.....Because I have taken every weight into account......

[@pravindahiya719]

what has he added 95g for ? You didn't watch the full video for sure !

[@MechNinja]

Thanks bro for taking me side....😊😊😊

[@deshrajraj5945]

Hindi nahi aati Kya

[@Clipsonly464]

Hindi m bol le bhai

[@amanandshreyash4209]

PagalPagal Pagal speak in hindi