MED S Crankshaft Damper Kits

A look at the MED S crankshaft damper for all BMC A-Series engines.

[@tomheal2159]

I have this on my mini. great quality as always

[@troypowell1671]

i have this on my mini and the timing chain cover as well . looks great, fit great but i did have to modify my engine mount a bit so the belt could be replaced without pulling or lifting the motor.

[@shriramvenu]

I converted the pulley my 998 fast road to a multi rib type, similar to the type used on the Japanese MPis. Its great for dealing with Belt squeal, especially if you have airconditioning on. Would I be able to fit the crank damper to a multi rib type pulley?

[@franktaylor7617]

😎👍🇺🇲

[@kathysarmcandy1992]

I assume any competent crank shop can employ the first kit correctly. *1275 Midget

[@MEDEngineeringTechVideos]

Yes this will be ideal on a Midget, just check the clearance to the front cross member, as it seems these cars were all built slightly differently!

[@thomasnelissen908]

It was a pain in the a•• to install. It was rubbing against the coolant hose.

[@MEDEngineeringTechVideos]

We have seen some dodgy radiators recently with the lower outlet positioned incorrectly, which would give this problem.

[@andy_croft]

How about for teeth belt drive ancillaries not v belt

[@MEDEngineeringTechVideos]

It's a bit niche, we'd need to make 50 in a batch, if you can find 49 others to buy them...!

[@rboin]

How much​@@MEDEngineeringTechVideos

[@baronvontourettes]

Beautiful kit. Will this adapt to the BMC B series engine?

[@MEDEngineeringTechVideos]

No it's just for the A-Series