Meet the (Nice Feeling) CRP129X Elite Scan Tool From Launch

Today I'm reviewing the CRP129X OBD2 Scan tool From Launch. This is a new product for 2023 and is an upgrade from the Launch 123X Scan Tool.
#scantool #obd2 #review
**Discount Info**
Buy Scantool Here: amzn.to/3PGn4UJ
20% Off Code：20AQUD6F (Valid 9/14/2023 to 9/20/2023)
► Buy Merch Here: project-time-garage.creator-s...
► Follow us on Instagram: / projecttimegarage
► Like us on Facebook: / projecttimegarage
► E-MAIL US: [e-mail]
► Our mailing address is:
Project Time Garage
1113 Murfreesboro Rd
Suite 106
Mailbox #109
Franklin TN 37064
► Visit Uncle Mark's Channel: / unclemarksdiyautomotiv...
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting this channel so I can continue to provide you with free content each week!

[@Howardtripper]

I work from home and make my living from fixing cars and this tool has been so good in that respect I don't do heavy diagnostics but it has really been good with the small stuff

[@ericjudd3137]

Thank you great information for me. Big DIYer and work on a lot of friend neighbors etc.

[@ProjectTimeGarage]

Great tool for that

[@carolinawestern3875]

I recently bought the newer, black model, and it works great. It came with a TPS relearn tool, which I haven't used yet. People kinda new to using these. Need to remember to make sure the cigarette lighter is working. As most OBDII ports share this circuit for power.

[@ProjectTimeGarage]

Yep, great point!

[@neildean7515]

Great Review thanks. I bought this last week for my Opel (GM) Zafira 1.7cdti (2013) and its great value. It does give a lot of data and helped me with EGR/DPF issues and did a Regen which got me going. However, it would not do an oil reset and i could not get Short and Long term Fuel trims in OBD2 data, which as a DIYer is annoying. So, is there anywhere i can contact Launch to update the software? (tool is Fully updated to date). Thanks for great Video..

[@rascallangley7479]

Do you know if this do a DPF Re Gen on a 2010 model?

[@kyleorourke6706]

Nice

[@ProjectTimeGarage]

Thanks!!

[@silvergrizzly316]

REALLY nice tool. With their discount and your discount, one can really bring the price down👍 Not to mention how comfortable it appears to be in the hands... ✊️👊👀 🤭

[@ProjectTimeGarage]

Right on! I cannot properly illustrate just how good it feels to hold it. I may or may not just have it laying on my desk.......

[@silvergrizzly316]

@@ProjectTimeGarage 🤣🤣🤣

[@woody95124]

Where do you get discount?

[@woody95124]

Nice..Is this reader/ scanner a bidirectional reader ? For testing & calibration of modules e.t.c.

[@ProjectTimeGarage]

It sure is.

[@TexMexCounty]

Can it read how many misfire counts for each specific cylinder ? On live data?

[@ProjectTimeGarage]

Yes

[@1diotwithideas]

Looking to get this for trouble shooting what i messed up or if it was a bad part. Just changed all wheel bearing hubs and now my abs lites are on with no dtc. Can i monitor all 4 to find the problem child?

[@ProjectTimeGarage]

Yes, you sure can.

[@ericjudd3137]

Got it for 207 with the deal discounts

[@ProjectTimeGarage]

Good deal

[@thicks3036]

I’m needing to find out if my 2011 Malibu’s power steering motor is bad or if it’s the torque sensor acting up. Sometimes I lose power steering. I’d need to calibrate a new torque sensor after replacing it. Can this scanner do that or have the option to upgrade to do so?

[@ProjectTimeGarage]

I'm not sure of what works with each car, but you can go to Launch's website and find out what it can do for each year and model.

[@ericjudd3137]

Just order one should get it in a week got 2023 version Just wounding how it was without wifi can you Auto detect iv in the country it seems like it will give me a holler back

[@ProjectTimeGarage]

Wifi is only used to download updates and lookup codes. It will scan and autodetect without wifi.

[@ericjudd3137]

@@ProjectTimeGarage thank you

[@adamtrivette6978]

Does it do relearn for crankshaft position sensor or cam position sensor?

[@ProjectTimeGarage]

Not on the vehicles I've worked on.

[@spike8298]

I want to reset the fuel additive sensor on my 2009 Volvo V70 1.6D with 109 horsepower, which is showing the P1932 error code. Despite filling up and replacing the additive tank, the car still indicates a low level of the DPF additive used for exhaust cleaning. I'm considering purchasing the LAUNCH CRP919X and would like to know if it has the capability to reset the fuel additive sensor in my car, since it's incorrectly showing a low level despite being filled. Can the LAUNCH CRP919X perform this sensor reset for my specific vehicle model?

[@ProjectTimeGarage]

You will have to look at their website to be sure. Since I don't own any Volvo's I can't give any good info on it's capabilities regarding them.

[@TwoHemiViewer]

If you have an answer to my question that would be great. Related vehicle to this question is a Hyundai Sante Fe CM 2007 2.7Litre V6 Question is; Why can't this scanner read Air Conditioning Low Side Pressures, it can read high side but not lowside. Thank you.

[@ProjectTimeGarage]

The scanner can only read what the car's computer sends out. You may need a scanner with Hyundai specific software to read that sensor.

[@lucasfernandez5906]

How can you comprobe de real miles of the car with this tool? I recently bought it but I can't do it, could you show how to do?

[@ProjectTimeGarage]

Not sure if this tool will do it. It all depends on the car make, model and year.

[@stantonmills1543]

Is this tool capable of a transmission relearn for subaru cvt?

[@ProjectTimeGarage]

No idea, but the manufacturer's website should give you all you need

[@TexMexCounty]

Does it read wheel speed? To determine bad wheel speed sensor?? Thanks

[@TexMexCounty]

Also does it bleed abs?

[@ProjectTimeGarage]

It does on mine

[@HannibalXoner]

can this scan reverse sensors and/or seatbelt remider? my sensors dont work and my seat belt reminder doesnt either.

[@ProjectTimeGarage]

Every car is different. Check with Launch.

[@EdAguirre-zf6lg]

Ohhh

[@ProjectTimeGarage]

That's what I said when I picked it up the first time.

[@halidmuharemovic7495]

Would this scanner work on Iveco van?

[@ProjectTimeGarage]

Not sure.

[@robertnicoletti3846]

I used my 123 once and the touchscreen stopped working. Any suggestions?

[@ProjectTimeGarage]

WOW, no idea. I've never heard of that happening.

[@sylvesterjohns9610]

Can it reset airbag service light

[@ProjectTimeGarage]

Yes

[@alletsorodsb2197]

@ProjectTimeGarage Do you know if this scan tool show the problem modules if it will not communicate due to a bad ecm/pcm or poor connection with one of the connectors via sensor or within that? I have a no start no crank but will crank bypassing the starter relay with no fuel pump. Died one day while idling and battery, ignition switch also neutral safety switch are all good. Just trying to find out if this tool can isolate the pcm because my generic simple scan tool no longer communicates with the pcm and not that advanced. I do have a full lit dash when key turned. I will try and test the components within the 3 sensors but wanted to see if this would send a report if the tool does not communicate but shows the pcm is the issue. Thank you in advance!

[@ProjectTimeGarage]

Usually any scanner will tell you that it cannot communicate with the PCM in that situation.

[@indiancreekfarms3011]

Does it work on diesel trucks. I’ve got two ford diesel’s

[@ProjectTimeGarage]

It would not be my first choice. Before you buy anything, you probably want to have a look at my video covering the Powerstrokes and scanners/monitors. It'll save you a boatload of money: kzbin.info/www/bejne/nJ6TZoOniZZrf6c

[@minitruckinmatt1915]

How do you do misfire live data can't get it to work

[@ProjectTimeGarage]

I haven't had any trouble getting misfire data. One thing I've found is that every vehicle reports differently.

[@Howardtripper]

Go into the parameters you will find it there

[@djenn434]

Seems to be a fancy over priced basic scanner....After reading through manual it says it expires in 2 years when you have to rebuy the software on tool.

[@ProjectTimeGarage]

No, it's FAR from a basic scanner. I have a total of 17 scanners ranging from $25 cheapies to a $3K Autel MaxiSys. A basic scanner cannot do any bi-directional control - this can. The software doesn't "expire" - The ability to get updates will expire but the scanner will continue to work fine, just no more updates for newer cars. Same with my high end scanners too.