Battery Replacement for JBL PULSE 2 (How to step-by-step)

[@MegaSafetyFirst]

The battery on Amazon: amzn.to/3htmlmX (Associate link)

[@lethalchaos19]

Thank u for the clean explanation of step by step procedure. Will do mine soon i just finished replacing battery for my JbL xtreme.

[@fraaggl]

very good video ! The 2 red wires coming out of the batterie are soldered together on the BMS, same for the 2 black wires. You can put them together and in the order you want...

[@nealt8201]

Great instructive video. Much appreciated. Well done.

[@Dilligaf_Josh]

Absolute pain in the ass, no thanks. In the recycling bin it goes. Sound is trash by today standards anyway. But great job on the video, you are gifted. 🙌🏻

[@Em-ef4vh]

Same for me... Too bad it won't recycle, probably just burn or sit on a landfill... That's a shame that JBL made it so difficult :(

[@mohammadnavaee5271]

Thanks a lot.It was very helpful.

[@jeffrawson1991]

What battery am I looking for, for this replacement? Also I clipped the charger port cables from the circuit board with the aux port. Can I buy a new circuit board with the charge port and aux port already on it?

[@michaelvanscoyk746]

Tried this thanks to your directions. Unfortunately I grabbed the ribbon cable with tweezers to guide it into the housing slot. It smoked a little at the cable end. stupid move on my part.

[@iamthefinal]

difficult than any phones,thx for video and just throw the speaker in the bin

[@felipesuarez5846]

Muchas gracias muy bien explicado bendiciones

[@kiskis0611]

i have same speaker it sad that they make not from direct power but from battery power now my battery dead and to replace need be this pro

[@MegaSafetyFirst]

I agree with you. It would be a lot better if the speaker was able to work just with the USB cable connected. Replacing the battery is very complicated on this model.

[@frankgerrard739]

What glue do you use to passive bass

[@SantisandKisin]

how much is the replacement battery cost pls? mabe it's not worthy to fiddle and is better to buy a new speaker?

[@dang25272549]

Thanks so much for a real good advise .

[@michaelellis6384]

Cool dude

[@mygiguser]

nice work

[@MegaSafetyFirst]

Thank you. I appreciate the feedback.

[@josegabrielblockstaackmann5354]

Hey, Im trying to connect the charging port directly to the speaker, to avoid the change of battery. I only use it on my room anyways.

[@josegabrielblockstaackmann5354]

Do you have any idea of how to do it?

[@adrianrylski8794]

@@josegabrielblockstaackmann5354 try swapping the connectors just make sure you plug the good ones in and leave the ones for headphone jack out

[@joseblock7490]

@@adrianrylski8794 should I include a voltage regulator?

[@adrianrylski8794]

@@joseblock7490 if your source is stable (good pc or known good charger that won't be necessary, just make sure you're powering it from something decent and you will be fine) then you don't need voltage regulation. my best bet for you would be a powerbank as they physically don't output more than 5v. Also i ripped my battery apart by mistake and positive and negative wires go to one terminal (2 red wires go to one positive terminal and 2 black go to one negative) which I think meant you don't have to have both wires populated for the thing to run

[@Zioluideecreative]

bravo 👍 👍 👍 👍

[@DavidG-kv8wm]

Where do you buy the battery?

[@MegaSafetyFirst]

I found the battery on Amazon: amzn.to/3htmlmX

[@DavidG-kv8wm]

Thank you

[@adrianrylski8794]

Well that's a better way to do it. I tried doing it on my own and pretty much disassembled it completely then something didn't feel right so I went on KZbin and we'll. I regret wasting time haha

[@mariogonzalez6559]

en donde pueden aser eso, alguien puede decirme

[@denizv.4818]

This device is the most difficult device to dissemble which i have ever seen. Shame on you jbl. Really they made as use and throw.

[@deesolid1]

My speaker doesn’t want to turn on nor charge