Men of War Assault Squad GEM Editor Tutorial: Beach Assaults

[@schrodinger8490]

I keep going back here lol this is still prob the only best tutorial i keep forgetting it then i go back here.

[@Luisjruizl]

Hola. ¿Cómo hace para que permanezcan visibles los waypoints y zones? Yo uso el mow editor. Muy bueno el tutorial, aún sin entender el ingles hablado. Continué así. Gracias por compartir sus conocimientos.

[@thepushanddewproject]

I am very new and you didn't tell me enough or explain I just waisted my life on this, THANKS!

[@123stealthbomber]

I hope your kidding me. I went to the very details of everything you need to know for this particular topic. If there was something that was not explained enough or correctly then tell me that so I may clarify for next time. If you are new at the editor watch my basic videos on my channel. Beach Assaults are a very complicated topic. If you are a novice at the editor then a topic like this will be too confusing for you at first. I suggest watching easier videos first, experiment and get used to the editor. When you feel comfortable about what you are learning then get a little more advanced and so on. Then eventually you might want to tackle a subject like this once you know the foundations for the editor.

[@thepushanddewproject]

Yeah I found it out I am sorry for being rude I was having a bad day, I watched it again and figured out i was being a dumb

[@123stealthbomber]

thepushanddewproject Then I am sorry for being a little hard on you. I had no idea you were having a bad day. Well I am glad that you figured it out. :)

[@questionasker7285]

Stealthbomber I don't know what to do? 3/4 of my landings work but one just doesn't want to emit the men. When the icvp gets to its drop zone the door opens and the men stand up but don't get out and then when the icvp leaves they still are standing still until the icvp disappears from under them and the they fall into the water and still most don't go to the waypoint. I feel like there is something wrong with the emit or with the zone but they look right to me. Is there any suggestions you might have for me in fixing this. Thank you

[@elreydelchurrasco6316]

Hey, I have a problem, just made a LCVP walking perfectly, but I try to make another LCVP but this stands still , help me solve this please

[@Gamingbroofbrogaming]

Hello.I find Terrain hard to make,Is there a beach "Map" Like D-day (Not the Us Skirmish overlord in the vanilla game) That i can put forts,Sandbags and otherthings down.

[@fuckoffalready8523]

no but there are countless extremely edited very realistic dday beach assualt maps tou can download. all you have to do is put them in the maps folder of your game then load up MoW editor press f2 and load the map

[@sturmlocke99]

Works fine, greetings from germany ✌

[@lukiegaming4272]

Thx dude i know how to create an invasion in my gem editor keep the good work👍👍👍

[@lovesauce3278]

Thanks man, I love your videos.

[@alexanderschulte8248]

When I press start the lcvp just diasppears

[@X2cool360]

Thank's dude that was very helpful

[@joneszer1]

Hey man I understand this is old but I’d like some help. I’m not understanding this whole tag thing. And how did you get the men you wanted to be drivers and gunners?

[@nathankuehn1832]

Is there anyway to make it so even if the driver is killed it keeps moving? I took away all of the machine guns, and all of the artillery and it still gets blown up, or the driver gets shot dead.

[@Deadcompany1]

Hey 123stealthbomber I have a question. Is it possible to make artillery fire which can damage units even if there is no artillery pieces nearby ?? BTW I appreciate all the work you have done 123stealthbomber

[@Goose2able]

use a waypoint, and then put a zone over it, probably a circle, start up a new trigger, for the condition, use a "near" then mode = work units = zone - to what you named from before player - optional, if you want a certain player to trigger it state - moveable (come onto this later) near to = zone - to what you named before distance = i put 5 and leave the last thing on default, then on commands, use the "spawn" one and put in "explosion" (or whatever you want) then put the way point, and you then have an explosion triggered by units come near. Now, that "moveable" line, I use this to make a good " IED" on maps i have made on the editor, means i can put the waypoint on a "kubel" and when someone gets near, it blows up, I don't know i this is the best way of doing it, but i know this works, and apart from 123stealthbomber, there is no real good guides out there that tell you how to do anything, so this is just me pissing around that came with this :) hope this helps

[@anetaboguszewicz8355]

what you need to write in the actor board tab so that the enemy grabs, for example, an anti-aircraft battery

[@joshuamohring9469]

Hey stealth i've tried but i can't get the water to work properly the troops just walk into it and they won't get into the lcvp they run into the sea i'm trying to make a large beach invasion Americans vs Germans or japanese

[@dixoniii]

thanks for the video it saved my beach assault :-)

[@RileyPoulin]

Can you help? My lcvp's float over the water. I've tried changing their water altitude but it doesnt help. ?

[@nathansmiddy]

how do i get the landing craft to open its down when it hits land as when i did it, it never works :/

[@TrueGamer327]

hi nice work keep doing what ur doing

[@TheBfko]

Hi, is there a way to spawn lcvp with soldiers every 20 or 30 seconds just like you do in your Endless waves video?I changed the delay in lcvp trigger but it just delete the lcvp and spawn another.

[@dogegaming7063]

they jumped out the sides becuase the creator wanted to inspire the normandy landing because in normandy some soldiers went out the side to be safe but they mostly drowned

[@theshogun3851]

when my cannons blow up one lcvp, they never spawn again. can u help 123stealthbomber

[@jansonwicaksono]

Hey, I tried to make this but instead of lcvp, I used the APC T20 tractor. Everything worked out fine, the passengers went out, they followed the waypoints, and everything else, but the t20 won't go back out of the map. Any solutions?

[@ceeninja]

@123stealthbomber-Good work dude been watching your vids and helped me so many times good job 1 request can you make a vid on like making thr mission intro like in mission mode where the narrators talk?thanks

[@PTgamers111]

I have a question! Why my men who are further back in lcvp do not leave the boat when who are more forward die? How do I fix this?

[@nathankuehn1832]

What if I save the game will the mission disappear?

[@anubhavsinghrana6356]

I followed each and every step as shown in this video . After wasting 30 mins and finally completing this d-day kind of beach assault project when i clicked on start , my lcvp does not disappeared. Actually , it does not move . Plz help

[@sherman1178]

what about the covery ambush

[@robertnooney8877]

when the craft reaches the 1st waypoint they get out but do not move until the lcvp moves out from underthem and then some begin to swim to the first waypoint on land or walk to it only about 4 out of 14 at most also when the lcvp gets to the delete zone it does not delete it its adding the tag but nothing happens when it gets there

[@marc8959]

I have a deep -200 the boat is at -45 the water is called water_river_big4 I have the script and if I move the lcvp whit f3 the troops get out and all works my problem is that the lcvp doesn't move.

[@RileyPoulin]

They get out the sides because it is a too far running distance to the gate. They have to get out to avoid dying from a explosion. If you ask me, the last 4 should do this, but it doesn't. Anyways I'ma try this in the morning when I'm not tired.

[@hannibalkills1214]

To what extent the "open" effect applies to vehicles? Half-tracks, aircraft, cars, trucks?

[@DailySimplicity]

hannibal kills open applies to most anything you would expect it to, if your unsure test it with a script on one vehicle and if nothing happens then it doesn't, though it also works with gate and other actual props not just vehicles (also other boats have open commands)

[@masterman812]

i have the cold war mod i did this with lav's it works but only the crew of one lav gets out the rest just go to the waypoints

[@WARSSS11]

in-game music?

[@professorbulldog1010]

so helpful!

[@MultiAutis]

Hey Stealth, is it possible to make it so that after the infantry leave the LCVP to start opening fire, because mine are just mindlessly charging into the machinegun fire.

[@123stealthbomber]

Yes. Either have a actor_state on a waypoint stating the units to open fire. OR Have a zone and when the units enter the zone, have an actor_state and let them open fire. Either way works fine.

[@MultiAutis]

***** Thanks for the REALLY fast response, less than an hour :) I'll try it out.

[@MultiAutis]

***** Hey, another question, I was your video on g-link and wondered if it was possible to maybe transport a jeep in a LCVP, and have it drive off when it reaches the shore

[@123stealthbomber]

Fredric Mark I have never tried that, but it probably will not work.

[@nomennisceo6495]

In real life the LCVP had a design that made it a deathtrap when the door opened and many trops in the back of the LCVP jumped over the side to survive

[@123stealthbomber]

Oh wow. I did not know that. That must explain why in the game the troops in the back who exit the lcvp jump over the sides.

[@nomennisceo6495]

it was on of the big problems with the landings in the pacific and was also a problem on D-Day

[@hanzcruz7620]

*Trapdoor opens* Feuer! TUH!TUH!TUH Jump on the side!

[@nomennisceo6495]

Yes it did but it wasn't as got on the sea as the LCVP meaning it couldn't always be used also it was first roled out in numbers by 1944

[@hannibalkills1214]

Also the LCVP was designed to _send as much troops to the battlefield_ as _quick as they can_. It's pretty much a straightforward design but not without flaws.

[@RileyPoulin]

Sure. Here, I'll make a video in a few minutes

[@tpps87323]

how to make endless beach landing?

[@christopherfisher814]

Must u do all this more than once if you have multiple landing craft?

[@willz2940]

yes

[@christopherfisher814]

HelloIamWill ok and then how do I make waves of it? Do i just clone them?

[@superdaaa5563]

you can copy and paste it with contol c an control v keyboards

[@harrygames7377]

my lcvp os not moving..

[@golden4857]

same

[@TactfulWaggle]

he said change it from constrain ground to water..

[@marc8959]

@Assassin NightFury same somebody has any idea

[@TheM3nt0ss]

i did everything what you did and i rewatched your video but i dont work :( the lcvp just dont spawn

[@Somebody7748]

You ma yjust want to change their altitude manualy by holding down c button and moving mouse up and down.

[@RileyPoulin]

I've tried that. I don't know what the problem is. And because of this, infantry dont get out because its too high.

[@_Tristen_]

my lcvp disappears when I press start why is it doing that?

[@Alldaboss]

I did a little testing with beach landings and found out that the giant landing ship can do a beach landing and drop down its doors

[@thitran1362]

is it possible to do a beach assault with tanks? Since if I set the ground too low then the tank may go under but set it too sallow then the boat won't move.

[@yeshee_cosmic]

no, dont have a big boats for transport vehicles ;-;

[@MhmD-TH]

i think they only work on shallow land

[@fuckoffalready8523]

lvt and amphibious tanks will drive in any water level and drive onto land up the beach nothing required

[@xenophont]

123stealth umm I need help can you make a server on How to put music In game MOWAS2?

[@chippidychip1145]

What map is this?

[@thedrunkus9792]

just watching a 1:42 mins i can tell you it's most likely the introduction map soo look for something like that

[@sh1fty725]

for me everything works exept that only 1 passanger gets out and the rest waits in the boat

[@thepushanddewproject]

Dude I got a mod and it's the lvt-4 water buffalo mod, this works 95% of the way except as soon as anything shoots weather if be the friendlies or enemy's they get out. I was wondering if you can help with this.

[@123stealthbomber]

Select the lvt and go to ables. Look for emit_passengers_on_enemy. Have this checked off by clicking on the box. It will be deactivated when the box turns grey.

[@thepushanddewproject]

i just added an actor state on waypoint 0 (the waypoint it spawns at) to ai move disable and movement hold

[@123stealthbomber]

thepushanddewproject Ok and did it work that way. If so then you should be good.

[@thepushanddewproject]

yeah dude it worked, thanks man, it is awesome how you respond to every comment, not that many channels do that. Thanks for the help you are by far the best channel as far as tutorials go for men of war. keep up the great work.

[@sillytrew]

Does this work it men of war assault squad 2?

[@princeskyrider1226]

It is mowas 2 at least I think it is he just didn't put a 2

[@Mark512474]

can this be done with multiple lcvps as i can only get 1 to work

[@123stealthbomber]

Yes it can. You can have hundreds of them if you would like. You probably did something wrong to the scripts for the other LCVP's or the terrain is not set properly.

[@dogegaming7063]

keeep up the great work and dont stop doing youtube

[@nicklasbenjamin2520]

When i try the lcvp just wont move i have changed to water from ground so i tried taking it over manully but that dident work either anny help?

[@fakhramzirakhryanshar7365]

the terrain must be WATER not SHALLOW WATER

[@875yertgeyker875]

make a tutorial on allies

[@talesofluminFan]

I have a problem where the infantry once landed just stick around the first waypoint and even on free move they just stand in a circle also what do I do if thr driver of the lcvp is killed or its destroyed how do I get it to keep spawning lcvps

[@talesofluminFan]

plz help

[@stor-who]

you can get rid of the condition for the lcvps to spawn (the

[@talesofluminFan]

Stor Is Me Thanks

[@陳景程-o7f]

talesofluminFan sorry sir i have a question is about the editor i had seen the video by yesterday how to make army use the hidden and waypoint if has it or did it please teach me thanks

[@namachef]

working for as2 over here

[@woodstock_hd_5942]

You saved my beach landing xD

[@alttplink]

YES!

[@bitgames2375]

i tried and dosnt work a rewacht and dosnt work again i make EVRETHING righ but the infrantry stay in the lcvp they stay there the icvp stop open the door and they stay there something like glitch becuse they shaking but they stay there the lcvp go way an they are deleted... can you help me i hope you understand me i am braziliam and i am not good at english

[@123stealthbomber]

Well I am sorry but I can not help you that much. My only suggestion is to keep re watching the video until you get it. Here is suggestion I give to some of my other viewers. If you watch it and doesn't work no matter what, and you do not know what the problem is. My best suggestion is to delete everything and start from scratch. Do that until you get it right. My only guess why it isn't working is probably because of a simple scripting error or it could be the map itself. The terrain is probably screwed up.

[@bitgames2375]

***** ok thankyou!

[@bitgames2375]

***** but not is the map becuse i use the same map that you i will make again my scenario and thankyou for at least you try to help your videos aree great

[@calebmccoy2553]

I need help stealth, my lcvp goes about 10 yards in game and then teleports back to the start

[@calebmccoy2553]

the start wayppint

[@K-Nyne]

What's the delay between spawns you used?

[@hannibalkills1214]

I'm sure you didn't make the lcvp to clone itself.

[@K-Nyne]

This hasn't really got to do with the scripting, but my lcvp spawns in mid air when I press start. It might be the map, but the water is -185 and the lcvp spawns at -15 and doesn't move. How can I solve this?

[@123stealthbomber]

You can set the constraint of the unit by selecting it and going to its properties on the right and if you scroll down, you will find constraint. Set the constraint to water. That should fix the problem. If not then it has to do with the water level when it was placed in f2 mode.

[@K-Nyne]

***** I got it to work, now I'd like to know if there's a away to make them stop coming after a whie. The lcvp now rotates of course and keeps spawning. i'd like that to stop after a few times, how do I do that? Or can't it be done?

[@123stealthbomber]

Xerophax Yes it can be done. I would suggest and watch my while loops and if commands video.

[@K-Nyne]

So if I got it correctly: if I want an lcvp to teleport&rotate like in this video 5 times, I use the ''if'' command?

[@SenSe-li]

Thanks but it is didn't work. The ship not move

[@hauntedholmes6954]

when i try to move the icvp on my own, the soldiers jumps out. help D:

[@sillytrew]

Luke Reid maybe because the lcvp hit the ground damaging the lcvp causing them to jump to

[@MhmD-TH]

if they are getting shot at and the lcvp isnt destroyed,then select the lcvp and go to properties and look for ables in ables look until you can find "emit_passengers_at_enemies" which makes it drop off the troops if its looking at enemies press the white box next to it and it should become black i think "emit_at_attack" is the one you're looking for it,just do the same and you're good to go

[@albinospino3089]

@@MhmD-TH Not what he was asking for moron. Yes I know I'm late.

[@golden4857]

get OBS it better than fraps

[@itspancakebro927darkhistor4]

Hey I was trying to add a lvt but it doesn’t move at all. Could you make a tutorial on lvt4’s?

[@joshuamohring9469]

NVM! i got it

[@ceeninja]

Only 1 guy comes out

[@Haxorzer]

you really sound like teeqo from faze... hmmmmm