We never learned about the DOAS in school, so your video was a big help indeed!
@MEPAcademy9 ай бұрын
Glad it was helpful. Thanks for watching.
@KhalilAhmad740362 жыл бұрын
Well explained with great presentation. Thanks!
@MEPAcademy2 жыл бұрын
You're Welcome
@gloriosingui1566 Жыл бұрын
Thank you for the explanation. Few questions I have are in regard to the direct cooling using the DOAS for latent cooling and an indoor AHU for air circulation and sensible load. Since the DOAS will be providing 100% OA and the AHU circulating air: 1. Would this create and over pressurize space? 2. How is the CFM balancing done? 3. Should there be an additional relief fan?
@MEPAcademy Жыл бұрын
Of course whatever air that is brought in using the DOAS will have to have a corresponding exhaust or relief. This all depends on the design criteria for each of the spaces receiving Ventilation air. This is similar to a unit using an economizer. There are several examples in the videos related to economizers and the DOAS unit. Depending on the space requirements you can use the DOAS to pressurize a space or create a negative pressure by exhausting more than is supplied.
@Puppyforyu Жыл бұрын
THANK YOU FOR THIS VIDEO IT HELPS ME UNDERSTAND DOAS WITH VRF UNIT COMBO VERY WELL
@MEPAcademy Жыл бұрын
You're Welcome
@minjker2 жыл бұрын
In the VRF system- if the cassette is off/not calling, will the DOAS continue to supply outside air or will it only give air to the room when the thermostat calls?
@MEPAcademy2 жыл бұрын
You would need a control damper to shutoff ventilation air to a space if that spaces AC unit was off, and have a VFD on the DOAS unit to slow down the fan when pressure built-up in the ventilation supply duct.
@MarcAntonyOrteza-jh1zc2 ай бұрын
Thanks this is great video
@MEPAcademy2 ай бұрын
You're welcome. Thanks for watching.
@viniciusbraga5846 Жыл бұрын
Great video ! A lot of nyc projects I have worked on used the last method presented on the video
@MEPAcademy Жыл бұрын
Thanks
@rider27312 жыл бұрын
Very well presented. Thank you for sharing. I have given you a thumbs up and subscribed.
@MEPAcademy2 жыл бұрын
Thank You
@monirupaananya3563 Жыл бұрын
Wonderful explanation
@MEPAcademy Жыл бұрын
Glad you liked it. Thanks for watching.
@Md.AbuHanifa-yi2he9 ай бұрын
WOW, Its very informative
@MEPAcademy9 ай бұрын
Glad you liked it. Thanks for watching.
@stevecoffey4884 Жыл бұрын
My designer is not using a chiller for a 10000 SF single story bldg? Doas is piped into conditioned space. AC is from a DX.
@MEPAcademy Жыл бұрын
Depending on occupancy schedules and space zoning, there are various system options. Only the engineer who is familiar with the particulars of the project can decide what the best system is for the building and how its planned to be operated.
@yunjoonjung75942 жыл бұрын
Such a great video. Thank you for posting this.
@MEPAcademy2 жыл бұрын
Your Welcome
@robertarnold66723 ай бұрын
This is my first time learning about the DOAS system. So basically it is tempering & conditioning the outside air by filtration & use of a heating/cooling coil that is being directed to a space. A fan coil unit or other device is in the space to handle the bulk of the heating/cooling load but the tempered air from the DOAS provides high quality ventilation & reduces the work load of a fan coil, etc. Is my understanding correct on this?
@MEPAcademy3 ай бұрын
The DOAS can be used to handle the latent load, while leaving the sensible load to the terminal units. DOAS units are used in many applications, such as hospitals, Gymnasiums, Schools, Laboratories, Etc. They are used to Comply with ASHRAE 62.1 ventilation requirements, and can be used with energy recovery where applicable. They are commonly used in VRF systems, as most of these Fan Coils can't handle much latent load.
@robertarnold66723 ай бұрын
Ok, got it. The latent load taken care of in the DOAS system is to dehumidify the ventilation air & the terminal units in the space lowers the temperature or increases it therefore taking care of the sensible load. I’m really enjoying this channel !