Mercedes-AMG A35 Milltek Exhaust Comparison

Follow me on instagram @beluga45s
Comparison video, car is bone stock, GPF/OPF still on the car
Mercedes A35
A35 AMG
A35 AMG Exhaust
Mercedes A35 Exhaust
A35 AMG Sound
Mercedes A35 Sound

[@martin-drt]

The sound is crazy for stock car with GPF. It sounds soo much better and that’s very cool that the car is still stock with that sound especially for warrantly

[@Marhoscars]

Yeah exactly 👍

[@b3luga279]

Thank you!! Finally someone who unterstands how to film a proper exhaust test video. I am thinking about installing a Milltek exhaust on my a35 but the backbox delete is illegal in Austria and I am sure i would not get a permit for it. Do you think the Milltek system WITH the backbox will be worth the 1100€ ? Also, did you measure the dB while in idle and 3500rpm (with the Milltek exhaust)

[@Marhoscars]

Yeah exactly, I wish there was a video like this when I was about to buy mine 😀 I think the resonated version would be good too actually. Definitely better than stock. I did not measure dB…

[@b3luga279]

@@Marhoscars Ok thx for the reply!

[@Pronto-jh6cz]

Could you please send me a link or something or tell me exactly which one you put on it? I need this exactly this and nothing more or less! Perfect!

[@Pies4Lunch]

Love the sound bro, just curious does the valve attach to the stock valve setup? Do u have an override so you can open close while still in comfort? and hows the sound cruise comfort 2-3k rpm?

[@Marhoscars]

Hi man, thanks. You keep your original valve motor and attach it to miltek exhaust. So in comfort valve is closed and in s+ its open - like on the stock one. Cruise comfort is good, I mean you hear the exhaust more than stock one obviously but nothing bad…

[@Pies4Lunch]

Love it thanks for helping me decide, as long as it’s louder than stock in comfort hell yeah Enjoy it my man and keep up the content ❤

[@jasoncastaneda7095]

Sounds good! Which Milltek exhaust did you get?

[@Marhoscars]

Thanks, milltek race non resonated

[@jesszaeus7371]

Is there a normal sounding exhaust for a35, or do they all have that popcorn crackling sound? Love the car, but that's horrible noise

[@Marhoscars]

If you mean pops and bangs, thats from factory and exhaust itself is not responsible for that. Im sure it can be turned off by ecu tune.

[@liuyilin6880]

Hi. Is only milltek or steg 2 with downpipe? Any optimization?

[@Marhoscars]

Hi, this is only “back box delete” Car is stock.

[@allysim247]

Nice work 👍🏼

[@Marhoscars]

Thank you

[@TOBACCO69]

Have you lost warranty because of new exhaust?Because dealer said to me that everything needs to be stock factory to keep it in warranty.

[@Marhoscars]

Nope, with this exhaust you only lose warranty for exhaust itself. Not on powertrain.

[@nigerdon1]

So if you was to get a cat back it wouldn’t ruin the warranty ?

[@TOBACCO69]

@@Marhoscars is it worth 800eur?

[@hugo1968]

Hi what is the reference of the exhaust please ? (I have A35 and i search a new exhaust)

[@Marhoscars]

Hi, it is SSXMZ129

[@hugo1968]

Thank 👍 The car need a special modification to install this exhaust ? Are there any risks for the car to mount this exhaust ? (Sorry for ask many questions 🙄)

[@Marhoscars]

@@hugo1968 No, just cut off the old one and replace.

[@nicolorizzi402]

the downpipe is stock?

[@Marhoscars]

Yes

[@a69pdamir77]

wie macht man das mit dem opf erstaz ich hab mir den opf erstaz und den endtopf bestellt muss man da was an der software machen ich nehm mal an wegen dem opf muss man den rauscodiren

[@a69pdamir77]

und schellen und so braucht man nicht nehm ich mal an

[@Marhoscars]

Hi man, I don’t speak German but if you replace just the back box like me, there is no need for coding. If you remove OPF, which I didn’t, then you need to code ECU.

[@mariuszmistrz4538]

It is gpf back? With all filters on?

[@Marhoscars]

Yes GPF back.

[@daniell.horvath3710]

Could you send me a link for this exhaust? I want this on my a35 asap. :D Will I have a check engine light or something if we put this on the car? Does we need to make any software modification? Thanks for your help and congrats on the car!:)

[@Marhoscars]

Hi, it is SSXMZ129, Im sure you will find it on Milltek website. No there is no engine light because OPF is still on car. No you dont need any software modifications. My car is also stock because of warranty. Hope this hleps you ✌🏼

[@keanukonig8712]

I have A cla 35 amg with miltek race back and miltek opf bypas (opf delte) and it is much and much louder without opf and it is better for your car I drove 1.5 Month without software Change and I had No engine light now I have it stage 1 before tune my car Made 340 hp only by deleting that opf ( on A dyno) with stage 1 I have 380 hp still have stock downpipe .

[@Marhoscars]

@@keanukonig8712 I know its way better without OPF but I want to keep it.

[@thesocialhub8567]

Does it feel sluggish without the tune?

[@Marhoscars]

There is no need for tune

[@challyho2u244]

All that car and you havnt even got electric seats