Mercedes Benz CDI W204, W207 OM651 Engine Fuel Injector Seal Replacement Part One Of Two

[@preacher009]

Thank you the video was perfect..

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel ☺️

[@Leo-yj5gz]

Hello, but what size is the bent key you use to rotate the injectors a little before removal (min. 13:26)? 17mm? Thanks

[@stanhopeautorepaircentrewardak]

17mm but very gentle, Not too much force

[@Leo-yj5gz]

@@stanhopeautorepaircentrewardak Perfect! Thank you so much friend, now all that remains is to build the key as I think you did

[@hot-shotlabel3212]

@@stanhopeautorepaircentrewardak why not to much force?

[@fredrichardsss]

on my om651 i have puddles in these holes 1:57, this means my injectors are leaking? (when standstill i sometimes feel misfires)

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel. If you smell exhaust smoke around the injector or a shiny black carbon is built around the injector, then this could be 100% the case that your injector seal is leaking.

[@pignanellifabio4646]

Hey, are the injectors different between the OM 651 913 and the OM651 912? Between the c180 cdi and c200? W204 2012. Thnx

[@phillipcole-c7p]

that timing chain sounded very loose

[@noobfpvideo1597]

Thank you, was that injector 3 you were working on?

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel Yes, it was, I think.

[@mouhssinebouchiha5434]

👍👍👍professionnel

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel

[@Stomping-On-Roses]

Hello again! I have another question. I left my injector to a diesel specialist to check if its in good condition and its been a week and i called him up and he said he found metal shavings inside the injector. I don't know wether to trust him because the car starts but considering i accidentally poured adblue in the wrong tank so it sounds very bad when i start it. I checked with OBD it says in form of Cylinder 1 unbalanced. I empted the tank and flushed the fuel system with biocide. Now my question is, if i order a used piezo injector does it matter in what cylinder it goes in as long as it looks excatly the same? I have never messed with injectors before

[@stanhopeautorepaircentrewardak]

Yes, you can do that, but you need to put the new injector (Injector Quantity Adjustment Code) in the ECU.

[@Stomping-On-Roses]

I assume the same engine is in w205 220. Altough i wonder what end does the injector 1 lie in? Front or back?

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel. Front of the engine

[@Stomping-On-Roses]

@@stanhopeautorepaircentrewardak thank you!

[@palestine7209]

THANKS

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel

[@vianmonfared2429]

können Sie bitte der namen des Diagnosegerät sagen?

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel It is TOPDON PHOENIX PLUS DIAGNOSTIC TOOL

[@vianmonfared2429]

Vielen Dank

[@vianmonfared2429]

Wie viel zahlen Sie jährlich für Updates?

[@yamaha6374]

Cool

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel 😊

[@belekastoksanoks8196]

Chain gone!

[@stanhopeautorepaircentrewardak]

Thanks for watching our channel

[@pignanellifabio4646]

Hey, the injectors from the OM651913 and the OM651912 are differend? W204 c180 cdi and c200cdi w204 2012. Thnx