Mercedes-Benz E300,E320,E350,E400,E550 (2005-2019) - New Battery Install

[@JoseAlvarado-fo2ll]

Thankyou for your patience and taking your time to help other people out, this video was really helpful for me, I followed your steps and everything came out as you explained it on the video. May God bless you always,

[@TheBatteryShop]

Hi - You’re welcome and thanks for watching and sharing your experience!

[@tiadanama1998]

Best battery replacement vid I’ve ever came across

[@TheBatteryShop]

Hi - Thanks for watching and for your nice comment! We're glad you think so.

[@tiadanama1998]

@@TheBatteryShop you’re welcome!!

[@Kemishia1]

This was the best car do it yourself video I have ever seen!!!! Very informative and thorough!! Thank you! 😊👍🏾🤝

[@TheBatteryShop]

We're so glad you found our video helpful!

[@thekustomknight2264]

I always use a guard cover and always only loosen the clamp it is on a slider it will up over enough to take battery out in if not good luck trying to refit it . Got to remove the tray and then start the clamp thread again I use a 13mm

[@chrispoulton9089]

Great video thanks at lot much appreciated 👏

[@TheBatteryShop]

Thank YOU for supporting our channel!

[@IT_Farhan]

Very nice video, thanks!

[@TheBatteryShop]

We're so glad you liked the video! You're welcome

[@seungyobshin6634]

I have a question. The e300e / e350 /e300de electric flap latch is broken, can I only repair that part? I would appreciate it if you let me know the part number.

[@ibrahimbayramov]

Thanks for the video!!! very accurate and everything done step by step. I would like to know, in w213 (the car you posted a video about), do we have only one battery? or 2 (AGM). if 2, where can I find it? where it is located? Thanks in advance.

[@หนุ่มศิษย์วัดบางพระ]

E350 Hybrid 🙏

[@조병호-t5s]

잘 봤습니다^^ grand father 고맙습니다!

[@TheBatteryShop]

Hi - Thanks for watching!

[@DesertRaven365]

Great idea to use a surrogate battery to keep power to the electrical systems! One thing you didn't mention is the battery has two venting holes, you connected the venting tube to negative terminal (left hand drive car), did you remove the vent plug from the positive terminal or leave it inserted? My original factory installed Mercedes battery still has the vent plug inserted in the positive terminal side.

[@TheBatteryShop]

Hi - Thanks for watching! Yes, the plug should be inserted into the unused vent hole.

[@DR-GH]

Thank you for your informative video. I want to ask you about a problem we are having in E300 (W213) 2018. The parking pilot and hold function sometimes work and sometimes not. We changed both the auxiliary battery and main battery and after the changes they work but in the next day the problem comes back. The dealership was of no help. They had the car for around 10 days and cost around $800 and they are not sure of the cause!

[@TheBatteryShop]

Hi - You're welcome and thanks for watching! One person's personal opinion here thinks that the dealership should have communicated with the module that controls those functions and used the diagnostic tool's bi-directional feature to try to engage the hold function and pilot. They could then determine if there is a module problem, an actuator problem or a communication (wiring) problem.

[@DR-GH]

@@TheBatteryShop Thank you very much for your reply. Going to the dealership again would be like gambling because as soon as the car go inside their workshop they charge around $400 which would be kind of fine if they fix the problem ($400 for diagnostic tool check only. Unfortunately, we have one Mercedes dealership in our country). However, I have shown your comment to another workshop and they are suspecting the problem either from the radars or the wiring. They can fix the radars but not the wiring as they said they don't have the full diagram of the new models. However, currently, their workshop is full and they want us to leave the car for at least 3 days. I will update this comment once the problem is solved for reference for people who might face the same issue.

[@MohammedBestClash]

@@DR-GH any news?

[@automotiveaudit1135]

My 2018 e300 has the exact issue it’s worked maybe twice in 2 yrs of owning

[@melvinfish3172]

​@@DR-GHthe problem is still not solved I guess?

[@jfrosavage]

What battery do i buy for 2017 e300 4 matic?

[@TheBatteryShop]

Thanks for watching. You can visit autobatteries.com to find the right fit for your vehicle. Here is a link directly to this vehicle. www.autobatteries.com/search-result?zipCode=53149&radius=15&vehType=automotive&y=2017&mk=Mercedes-Benz&md=E300+-+4Matic&eng=PUC000000135457&country=US

[@bassemzaky7124]

Whats battery ampere suitable for E300 1991

[@TheBatteryShop]

Hi - Thanks for watching! We think there is some confusion on the model name. The Mercedes’s E300 was not manufactured until 1995. This was equipped with a 3.0L Diesel engine and takes a H8 at 825 CCA. In 1991 it was a 300E, There were 2 engine sizes available, the 2.6L and 3.0L. Both of these take a H6 group size at 550 CCA.

[@TurbineAir]

The 2020 E350 has a Mercedes P/N 001-982-82-08 installed from factory. Specs are 12V, 92AH, 850 CCA, RC 160 min, AGM. It is identical to an H8, Group 49, LN5 Battery size.

[@painmad]

I heard I need to scan the car because I replaced the battery... Did you do that?

[@TheBatteryShop]

Thank you for watching. Some vehicles need to go through a registration process upon installing a new battery. We would recommend consulting your dealer or a mechanic to verify if your vehicle needs it.

[@lukester1911]

My 2016 Eclass installation is different and much easier. Auxiliary battery in the trunk saves the memory.

[@TheBatteryShop]

Thank you for watching and for the feedback!

[@hnaseri1]

Don’t you need to program the battery and reset with the computer?

[@TheBatteryShop]

Hi - Thanks for watching! Some vehicles require this. We recommend that you check the vehicle owner's manual or a service/repair manual for the vehicle to be sure. You may also like to check out our videos on battery registration. The links are in this video's description.

[@xLeGendario23]

Only OEM battery recommended ?

[@TheBatteryShop]

Hi - Thanks for watching! Besides OEM batteries, those that meet or exceed the OEM specifications are recommended.

[@dionisisirantos801]

Thanks for the video. Do we have any information about battery registration??

[@dionisisirantos801]

@@TheBatteryShop For w213 model do I need to register the battery replacement?

[@VXR9773]

جميل هداك الله لدينه

[@TheBatteryShop]

مرحبا شكرا لمشاهدة! استخدمنا مترجم مايكروسوفت ونأمل أن يكون على ما يرام.

[@delvostube]

Thanks for posting the video! This works without any battery registration procedure?

[@delvostube]

Keine Antwort ist auch ´ne Antwort :-(

[@jeffqseid2169]

I did this and causes auxillary batter malfunction. Why ? 😢

[@TheBatteryShop]

Hi - Thanks for watching! We recommend that you follow the diagnostic procedures found in a service/repair manual for the vehicle to determine the cause of the auxiliary battery malfunction.

[@carlo8899]

You never mentioned anything about resetting the battery?

[@TheBatteryShop]

Hi - Thanks for watching! The battery registration information is in a separate video. The link is in this video's description.

[@dBlacks1889]

DOESN'T this car has 2 Batteries??

[@TheBatteryShop]

We recommend checking with the owner's manual!

[@MrMillrightman]

After all this is complete, the car still has to be reprogrammed to ensure proper charging

[@TheBatteryShop]

Hi - Thanks for watching! Please check out our videos on Battery Registration. The links to them are in this video's description.

[@domohedafe5994]

Reprogramm are u serious

[@TheBatteryShop]

Hi - Thanks for watching and your comment! Check out one of the videos on Battery Registration to answer all of your questions. The links are in this video's description.

[@majed9877]

I connected the wire as described and it started to smoke and was about to end up with catastrophic situation. I’d rater lose the radio memory than burning my vehicle.. useless video 👎🏼 or at least didn’t work for me despite of following the instructions step by step

[@TheBatteryShop]

Hi - Thanks for watching and sharing your experience! We suggest that you consult a service/repair manual for the vehicle to track down the wiring problem.

[@radekm1683]

Hi. Did you needed to adapt new battery in car system?

[@giovannialtamore]

What exactly started to smoke, the wire or the battery. If the wire, then you probably used wire that was too thin (hence it starts overheating). If the battery then you either connected the wires incorrectly (switching plus and minus) or you have a defective battery. Either way, there is nothing wrong with the instructions in this video. So before you call something useless, do check if *you* did everything correctly.

[@HtownRO]

This video is A+ please don’t work on cars 😂