Finally some content on 166 platforms. Please keep it going Kyle!
@israelphiri2584 Жыл бұрын
Just did brakes on my ML63 AMG, thanks for the help brother.
@lethemzen70962 жыл бұрын
Thank you for for the content Kyle, its been a while
@mikimiki1956 ай бұрын
Great i just got my pads from FCP I will be changing my pads this weekend. How ever I will not be changing sensor it’s not damaged 👍🏻
@gushung0 Жыл бұрын
I wish you'd do a video on the oil cooler replacement
@njlarry100 Жыл бұрын
Best video on mb brake job! Thank you for giving torque specs but prefer ft lbs over nm and specs flash by a little too quickly. Look forward to more.
@njlarry100 Жыл бұрын
The fcp video on the c300 shows greasing up the guide pins so the caliper can slide. Why the difference? Good luck attempting this job on jack stands. I could not get enough clearance to use a breaker bar and those caliper bracket bolts are on very thight. This is a very helpful video. Would like see some w164 and r129 videos too.
@kenarai79402 жыл бұрын
Awesome Kyle W166 info helps me a lot. For the nex one, Nox censor change please!!
@user-vn4kl3xs4c6 ай бұрын
very detailed and helpful video thank you
@user-sz7js7ko1i11 ай бұрын
Excellent video! Editing: what a concept! (I’m a retired editor :-))You should do a video on making videos! So many online videos are full of so much uneeded information and chitchat that I usually have to fast forward or run the video at double speed. Yours I had to keep replaying because it was so filled with information. Thank you for the torque specifications. Almost nobody else does that. Again, job well done. Thank you.
@taoge989 ай бұрын
is the torque specs correct?
@taoge989 ай бұрын
it's seem like 85 foot pounds
@hayksimonyan98682 ай бұрын
thanks for the professional video
@frankellytyson79292 жыл бұрын
Thanks you Kyle..... excellent video
@FockewulfAz9 ай бұрын
Very high-quality content! Love you guys!
@teexxx74607 ай бұрын
Hi thank you so much for sharing this what about 2014 E350
@Sal-75-29 ай бұрын
Excellent as always. Thanks!!
@fcpeuro8 ай бұрын
Thanks again!
@terrymarsh80942 жыл бұрын
Kyle good to see you and thanks for sharing great content
@MrDusa10 Жыл бұрын
Great video, however, why are some sites/videos saying that you need to use a scan tool to "retract the piston actuator" first? Is a scan tool necessary, and if you don't use one, does it set an idiot light on the instrument cluster?
@pappas10008 ай бұрын
You can do it on service mode in the dash.
@xImmortalxLegend4 ай бұрын
Yes make sure to do that first
@Danny-pp1gk Жыл бұрын
Great video. Thanks!!
@derekjohn-hz4pl2 ай бұрын
Ok great video. I have a 2016 GLE350 VENTED ROTORS ON TOP NOT CROSSED DRILLED, all the rotors for rear i see says for cross drilled front rotors i am replacing rear. What fits?
@fcpeuro2 ай бұрын
Hi Derek, if you are still having trouble, please email our team over at Service@fcpeuro.com
@The_bazzer Жыл бұрын
Beauty well explained
@ShaneStallions_TV5 ай бұрын
good info.... 👌 thx.
@taoge989 ай бұрын
I have an question at 8'22 the TRQ 85 NM for caliper bracket is correct? pls check it.
@winogod9172 жыл бұрын
Why some mercedes brake videos advise grease on pads and slide pins and other mercedes videos don't, what's correct?
@pappas10008 ай бұрын
Why don't you retract the cylinders on the dash in service mode?
@user-qz9ib6hi2n Жыл бұрын
какие тормоза с 2 поршнями можно поставить на заднюю ось мл 164?
@toningtony8411 Жыл бұрын
Amg package/midnight package affect brake pad size for the 20 inch rims?
@udohequere60422 жыл бұрын
Good job buddy, I am a Mb fans
@miquelcoleman916110 ай бұрын
I tried an 11MM and it didn’t fit. I guess I’ll find a 7/16 or T55 and give them a try.
@cptomes3 ай бұрын
do i need to put the car into brake service mode to prevent cycling of the abs during service?
@gtsllc5975Ай бұрын
Exact thing I’m trying to figure out
@youtubasoarus2 жыл бұрын
Great video! :)
@bobsbarnacle2 жыл бұрын
What does one torque the lug nut too?
@MattNis12 жыл бұрын
I really wish they would use some anti seize on the hub surface from the factory
@fcpeuro2 жыл бұрын
Us as well😞
@Dubaday2 жыл бұрын
before you retract the piston back on the caliper, shouldn't you have the brake fluid reservoir open and watch it from over flowing while retracting the piston?
@fcpeuro2 жыл бұрын
Hi Randy, absolutely a great note. That is a good rule of thumb to follow on any vehicle with any brake job.
@christopherjamieson42372 жыл бұрын
Anti-seize on the hub face will lower the frictional contact between the rotor and the hub. This can lead to putting the lug bolts into shear (rather than tension that they are designed for). This is a very poor practice and could result in a "wheel off" while the vehicle is moving. If anti-seize is required the OEM would have used that when new. Please show us something in a factory manual, bulletin or TSB that states this is a requirement...
@alex2378 Жыл бұрын
What brake pad recommended? Oem, bosch, etc??
@fcpeuro Жыл бұрын
Hi Alex, any OE/OEM pad are great fits for the W166.
@TheJMSevilla2 жыл бұрын
my car used a 9mm hex
@andrearamirez2039 Жыл бұрын
Can I use the x166 Braket/caliper (this one on the vid) and swap it to a X164 ?, I want to use the 375mm drilled rotors instead of the 350mm solid one that comes in the 2008 GL550... Looks like the Braket holes are located at the same spot... Or.... Can I use only the 375mm rotors on the X164 caliper?... please help :)