Bumper removal, installation, and headlight restoration of a W211 E class Mercedes.
Пікірлер: 80
@MediumHalf9 жыл бұрын
My OCD loves your thorough, measured manner.
@workouts577 жыл бұрын
I applaud the Car D. Ologist for an excellent presentation. Changing bulbs on the Mercedes is a hellishly difficult job. Removing the bumper is a small price in time to make to replace any or all the bulbs.
@jackflanagan49715 жыл бұрын
EXCELLENT videos which I saved for future use. You exhibit the motto of Mercedes, "Only the Best". Your son will benefit in so many ways, your family will be safer in the already safest vehicle ever produced, and I am now a loyal follower. Thank you for such thorough videos & your high morals in giving credit to those you have viewed and used for the right way to maintain any vehicle responsibly.
@AG-jh1ky5 жыл бұрын
I also restored the headlights on my 06 211 but i didnt remove the bumper..just used masking tape,3m restorer kit and finally ceramic coating to protect the finish. Easy as apple pie..no need to remove bumper
@josecerna17189 жыл бұрын
Awesome video!! I just did mine yesterday without removing the bumper, but I did use a drop cloth to cover the vehicle. The results were much better than I thought they would be. Thanks a lot!!!
@vipergts967 жыл бұрын
All you need to do is wet sand them and polish them. High speed polishing is the cure. Clear coat is a waste of money and more importantly you do not wax fresh paint or clear coat for at least one month depending on the product. If they're still foggy, its on the inside, in which case you need to heat the seal to open it and polish the inside the same way.
@vladimirvladimir31432 жыл бұрын
I love your videos - even those that I don't need to work on the vehicle. :) Excellent instructions with perfect images, and great narrative. I feel like I'm watching a surgery instruction video with a doctor commentary, like a cardiologist, for example. :))
@joealston30529 жыл бұрын
Excellent presentation and workmanship. You've given me the added confidence to do this project myself. A special thanks for your thoroughness in showing how to properly remove and install the bumper. Your effort very much appreciated.
@arjiecustoms19469 жыл бұрын
I agree, excellent
@gspadez6 жыл бұрын
I’ve Never heard a explanation so well articulated
@svenkle3 жыл бұрын
Unfortunately, I’ve had to access my headlights three times (once to convert to HID, twice due to aftermarket ballast failures), and this video has been invaluable. But what I would suggest rather than restoring the original lenses is replacing them. I did this with my headlights when I converted them to HID. There are eBay sellers selling a very high-quality replacement lens from China. You have to bake the headlight to remove the original lens, then seal the new one with butyl. But all in all probably less work than buffing them out, and the results are stellar. Like new.
@konasteph7 жыл бұрын
No sooner was I done with the brakes, new rotors front and back etc (Same car same year). etc. when one headlight failed. back up on the jackstands, off with the wheels, the flares, the bumper....might as well upgrade the lights, but: will this ever end???
@1ncogn1t0o9 жыл бұрын
Thank you > gives me the confidence and right way to take off the front bumper ☺
@stevenlynch66059 жыл бұрын
looks like you have the B6 struts on the front. You know you can adjust the height by moving the snap ring down at the bottom of the spring.
@JimSeamanCraig2 ай бұрын
I like all your videos but It seems to me that your wet sanding would completely remove all the clear coat you applied.
@tlwilson846 жыл бұрын
Thanks, hope it's as easy as it looks. FYI - LI is "links" or left in German
@tonkatoytruck9 жыл бұрын
Thanks for taking time to document the removal of the front bumper. I need to replace a fog light and this will make things much easier. Do you think the AMG sport package will pose any additional difficulties? P.S. The cost for the corner following headlight assembly is $1500 per side! They also have a special coating that keeps them fading as fast but also can not be polished out. I also recommend using dielectric grease when reinstalling the connectors. Not required, just recommended.
@francoisdutoit20629 жыл бұрын
well done man - my vehicle is pristine except for this problem. Thank you - I'm doing it!
@jawatkhan7257 жыл бұрын
Very good work
@zxtenn9 жыл бұрын
Nice job- many newer vehicles need to remove the bumper, I think the newer Jeep GC requires that. I have a 96 GC and the dealer wanted 55.00 for the Mopar restoration kit and I bought new ones on ebay for under 40.00. That's crazy $$$$ for new headlights Good idea that you replaced the bulbs while you had the opportunity Sucks about that inferior wire sheathing, especially when someone buys a MB, you know with any good thing many times there are negatives
@Salih.A.j9 жыл бұрын
What is so wrong with those dislikers mind ?? they are every where, to every video and in any action !! This video i would of consume it as a donation .... where were empty pockets have been so mean..!!
@eddiejay94078 жыл бұрын
you don't need to remove the bumper to remove the headlight assemblies right?
@SuperMarioFan724 жыл бұрын
You dont have to remove the bumper completely. You do have to loosen the screws and also remove the metal clamp holding the bumper to the front q panel on the inside of the side marker lights which is probably the hardest part if it all. I changed my lenses only in about 90 minutes and the lights look brand new. You can remove the whole bumper if you wish but it's not necessary. Make sure you unhook the headlight washer fluid hose if your car is equipped with headlight washers. The lights come out pretty easy.
@vladimirvladimir31432 жыл бұрын
This is what I'm about to do. As far as I understood, I need to remove the 2 top screws near the headlight, the metal clamp "inside" holding the bumper and side panel together, right? Do I have to loosen/remove the lower bumper screw near the radiator as well?
@SuperMarioFan722 жыл бұрын
@@vladimirvladimir3143 If I remember correctly, I didn’t remove the bottom screws holding the bumper to the underside of the car. Once the top side of the bumper is released you can then get the headlight housing out to remove the old bulb retainer clips. Pay special attention to the washer fluid hose if your car has that. And also before putting the bumper back on, test your lights to make sure they don’t trigger an error code since led bulbs use much less wattage. The computer could think the bulb is not on and it could trigger a light bulb out error. I had that happen on when I changed my fog lights from halogen to led and I fixed it by installing an 8 ohm resistor
@vladimirvladimir31432 жыл бұрын
@@SuperMarioFan72 Hi Frank, thank you for you reply. I will try that - the two bottom screws would definitely save some hassle. :) I plan removing the headlight completely in order to replace the acrylic covers and whole projector assemblies reusing the xenon bulbs.
@vvactivist4 жыл бұрын
Like your methodology. Wondering why you didn’t apply rubbing the polishing compound after the 2000 grit wet sanding and before applying the clear coat paint??
@drcastilloserulle7 жыл бұрын
Excellent work and great instructions. Thank You.
@sfc415rider5 жыл бұрын
Cheaper to just replace the glass and much better results
@Ray-hg3ie4 жыл бұрын
You can buy the lenses online. When you do that, then you really have something that LOOKS LIKE NEW. I sure as hell would not be happy with what he did. They really look bad!
@awcnj Жыл бұрын
Sir u r from which country, I am from Malaysia here when u bring in your benz mine is W211 model the price of repair goes u P10 folds,
@ernestspencer7168 Жыл бұрын
Nice job. How Long did take
@takashiokuyama3 жыл бұрын
外したパーツを投げるのが見苦しい。大切に、そして丁寧に。
@Marko007ify5 жыл бұрын
Dude just open up ur hood, put duckt tape or some lighter tape around the headlights and do what you've done, no need to remove the whole thing
@tamugrad20072 жыл бұрын
Considering what all he found by doing that, he did it correctly.
@yasinozcelikusa9 жыл бұрын
I guess the next video will be how to change tires. Your front tires seem to fail the Lincoln test :-) Thanks for the videos. Subscribed.
@jianliu75163 жыл бұрын
It won't last long after clean, I did that many times like that, maybe few months later turn back to blurry again , change the lens better if you already remove the headlights. Only cost $50-75 for the new lens and $8 glue. about 3 hours job. but last few years long.
@hughbo526 жыл бұрын
Was it worth all the effort? Appearance is a given, but was the time worth the $500?
@augustuswaltercnjacobs24709 жыл бұрын
very good thank you -from malaysia
@Lockemeister9 жыл бұрын
Thank you Sir, this is a very helpful video.
@royallstar8 жыл бұрын
I have the same problem. But another problem i see is the blurred focuses on both lights. Can this also be repaired?
@7AMDG7 жыл бұрын
Do you have any videos changing a serpentine belt or pulleys? Thanks Dr.
@tischlerbmw219 жыл бұрын
inside of my lights are also a little milky, need help taking the head light assembly apart.
@EndofUSA7 жыл бұрын
its still look cloudy.
@BJNeutral9 жыл бұрын
thanks for the nice video, i was wondering if oil from intercooler pipes was normal . apparently it is :)
@2emty8 жыл бұрын
Could we get a year later video, please?
@ICM-Nakuru8 жыл бұрын
very helpful indeed
@hugginsfamilybullys69627 жыл бұрын
DO YOU ADD ANOTHER CLEAR COAT AFTER THE POLISH AND WAX ?
@glasser28195 жыл бұрын
good question ! the wax is going to be gone shortly... then ugly looking lights again 😂
@vladimirvladimir31432 жыл бұрын
you can't apply clear coat after wax - it won't hold in place. the correct order is sand, polish, clear coat and then wax and buff.
@julius_me9 жыл бұрын
for windshield restoration what part of your car attempt to remove? :))) sorry for my english
@khalidvr62 жыл бұрын
Did it last?
@kushlandtooclean153910 ай бұрын
Why would you have to remove the bumper just to restore headlights doesn’t make sense to me IJS 😂
@kastri189 жыл бұрын
Hi, can you help me i have a mercedes e270 cdi 2002 and my brake lights dont work and how can i replace the bulb?
@MsShoaib1239 жыл бұрын
If all your brake lights don't work you will have to replace the brake switch
@simonf83708 жыл бұрын
Amazing difference - I'm in!
@Funionjack9 жыл бұрын
Licht means Light Links means left everything else was great
@howarddenton79843 жыл бұрын
Yes, correct... And while we are at it: Recht = law Rechts = right
@atos.nympha34519 жыл бұрын
awesome job man!
@DerpyExpress9 жыл бұрын
You surely can do that all without having your bumper off ~_~
@julius_me9 жыл бұрын
I dont understand why must remove all parts of your car!
@arjiecustoms19469 жыл бұрын
I hate ppl like u
@julius_me9 жыл бұрын
I fck ppl like u
@pocmc98579 жыл бұрын
i enjoyed that thx
@richstanway70786 жыл бұрын
Or replace the lenses like I have done. Better finish.
@1995RangeRover8 жыл бұрын
Nice!
@pedrothemexican33605 жыл бұрын
Sheesh. If your going to remove the entire assembly, why not just separate the clear plastic piece and just replace those. A pair of new ones can be found for around $40. It is super easy to replace them. Just heat them in the oven at around 190 degrees for half an hour to soften up the sealant, separate them with a couple trim tools, and re-apply windshield sealant and new clear covers. A lot less work than this.
@jorgencaceres79459 жыл бұрын
Fantastic. Thanks :D
@BStagg8 жыл бұрын
Hm... or you could just tape the bumper and go to town on the lights...
@JariMustafa7 жыл бұрын
Yeeeeeeeey ChrisFix ✌😁
@drewtorchia8 жыл бұрын
Or... Or... you can just mask around the lights.
@tamugrad20072 жыл бұрын
But then you can't fix all the other things he fixed.
@David-sm5ll5 жыл бұрын
I believe that you can do it much more easier sir!
@nunyabusness76279 жыл бұрын
All that just to remove headlights? Im out.
@tamugrad20072 жыл бұрын
Nah, you're lazy.
@7sevo75 жыл бұрын
same car, same problem.
@skiprope5367 жыл бұрын
Really is a waste of time for an end product of mediocrity. Better off buying new after market OEM. putting a coat of plastic sealer on them and keep em clean.
@moisesbazan96878 жыл бұрын
wtf.
@dariusgiurar54354 жыл бұрын
You are doing too much Jesus Christ no thanks you can do this without removing bumper
@naliasantos33706 жыл бұрын
Do what you didn't show any of the work Just keep on talking like your an expert