The best video how to do the change of xenon head light bulbs, THANK YOU!
@xenonland8 ай бұрын
Glad it helped!
@CrazyCannuck12 ай бұрын
Thank you for the video. I replaced both Xenon lights on my 05 E320 Wagon in place. It was tight and had to remove pressure tank on drivers (right hand side). Simple enough. I tried bulbs first. One worked fine. The second one i ordered a new aftermarket ignitor and still did not work. Ended up having to pay someone to remove bumper and replace ballast. Had the other ballast replaced at the same time for preventive mtce. Cheers, GC
@xenonland2 ай бұрын
Nice work!
@sjurkt2 ай бұрын
The Very very best video on headlight on W211👍 I'm new to W211 and have a few questions to the expert. Headlight in this video is adaptive bixenon and have halogen H7 high beams and xenon D2S dipped beams or low beams. Non adaptive bixenon headlight versions have same bulbs?. And the 3rd version have halogen lights on both high and low beams? There are only these 3 versions original headlights? Regarding low beam dipped beam nr1 check bulb xenon light ds2 nr2 check igniter nr3 check ballast. But if all these works fine and low beam are still poor or short in length can't the levelling automatic motor and the vertical adjustment motor affect the dipped beam? How to check these parts? And also on my w211 there are 2 levelling xenon sensors mounted on car. One on left side of rear axle and the other on right side front wheel chassis and connected to top of the upper spring plate. If one or both of these are broken or malfunction this can also affect the dipped beam or result beam are short inn length or? I thought that these sensors also could affects how the light adjusts automatically regarding weight inside car and on towing weight so the light don't blinds oncoming traffic. Do you know if these automatic adjustment only take place on the low beam dipped beam? Can't see any levelling motors on high beam h7 halogen light? And I noticed that there are 3 plastic hexagonnuts on the upper side of mine headlight and yours too are these nuts for manually adjustment of lights? Can that be done on bixenon headlights too or only for halogen headlights? Thanks for great videos👍Would love to see the setup of the testbench you made. Which pin to plus and minus from ingniter and ballast to 12v🤗
@xenonland2 ай бұрын
How many km/milage is your clock? How many km done your W211?
@sjurkt2 ай бұрын
@@xenonland Hi, odometer 386tkm w211 220cdi 2004
@xenonland2 ай бұрын
@sjurkt BINGO! 99% your reflectors of the projectors are "burnt". You need new headlights or your projectors should be chrome plated again
@@xenonland Ok thanks for info. I will open up and check chrome on reflectors. If its not allready have been changed earlier, is rechroming a good option? Or is led upgrade better? Or is it possible to downgrade to halogen with manuel adjustment just to avoid all possible malfunctions and fuzz with igniter, ballast and all other sensors etc?
@alexross575711 ай бұрын
Thank you for this video, worked on my c219 CLS. There was enough room to change the bulbs etc. with the headlight in place
@xenonland11 ай бұрын
Glad it helped! Please consider subscribing to support us!
@Валентин-в6я1д7 ай бұрын
Уникално видео!Благодаря от България!
@SwipesYT9 ай бұрын
Would you be able to make a video showing how to replace the h7 high beam bulb?
@pikethree5 ай бұрын
Thank you for that brilliant explanation sir. Regards
@DimiBigBoyАй бұрын
Any idea where I can find the wiring harness for the w211 e class bi xenon? The insulation in my wires is completely gone, causing headlight failures. Thanks.
@xenonlandАй бұрын
The only way is to find another donor headlight. It is not sold separately.
@martinhjartstrom169312 күн бұрын
Is it possible to fit a adaptive cornering bi-xenon headlight to a car that has non adaptive xenon headlight?
@xenonlandКүн бұрын
Theoretically you can do that, but requires many other parts. Range control unit as well as AFS modules/LWR modules/swivel modules etc... are different.
@sameramsh_78592 ай бұрын
I have a dipped beam fault when I turn the ignition I hear a sound from the headlight I just installed it today after running two hours and now the low beam is not working
@agostinom3539Ай бұрын
Amazing video 🎉
@xenonlandАй бұрын
Glad you liked it!!
@robinrondje10 ай бұрын
i have a problem with my high beam on my right bi xenon lamp. do you have any advice for me?
@xenonland10 ай бұрын
Most probably the shutter is not working
@robinrondje10 ай бұрын
Thanks for the quick reply!. Yes i'm thinking the same. I was hoping it might be the ignitor, but probably not. Is there any way i can check that the shutter is not working? Which cables are running to the shutter. @@xenonland
@xenonland10 ай бұрын
two cables that you see underneath the projector@@robinrondje