Mercedes ISM MODULE replacement

[@SuperJackkd]

You the man ! my car giving transmission range sensor 2010 e350 and I believe this is exactly what needs changing

[@martykuks4634]

Excellent description on removal very helpful

[@stevetakacs849]

Mine had torx screws on it. Much harder. Had to remove drive shaft. Want to buy an Ml?

[@andrestair1083]

Lol u made it look so easy. Of course the bottom screw stripped on mine and I had to chisel it with a screwdriver and it snapped off. Also the bolts on mine are different which is how I stripped it

[@kenhunter6778]

Thank you, I am about to do this with a 2006 ML350 stuck in park. Luckily I found someone to program it for me after I install it For 250.00. Still a bargain considering the dealer cost.

[@caseherc5991]

Hello 👋🏽, question, did u tow it somewhere to get programmed or did they come to you?

[@_fabrizioaponte]

I really recommend changing your ism modules for dsm module, the ism module has problems with a gear but the dsm has water filtration problems but I think it can be solved more easily

[@johnniewashington9207]

My ML 350 06 model will not go into gear unless I unplug the plug on the passenger side of transmission and i also have some communication code no communication from the ECM to the transmission control module wash your thought on it

[@farhaadmahomed7689]

I parked my Mercedes-Benz e 250 and when I started it the gears are selecting but the car is not driving

[@bengoodman1435]

I have a 2006 Mercedes Benz r350 stuck in park, the problem ISM intelligent servo module, where can I buy the module and program it, its not worth going to dearship for this, l can take it out and replace it myself, the problem where to get it and program it, thanks

[@blackston22]

I got mine from Amazon.com also use the autel scanner im608pro or any MaxiSYS MS908 good luck

[@nagual_art]

Thanks for making this video

[@genolove1566]

Would u happen to no if a brake pedal sensor Will make my car stay in park on a 2009 s550

[@blackston22]

Will stays in park but if you have a scanner you can clear until you make to a safe destination...

[@jamesblake5176]

so if you don't have STAR you can't do this, correct?

[@johnniewashington9207]

Why are you changing that out

[@andreasalevras7380]

Very convoluted ! Plus the programing cost !

[@Kaibil959]

What was the code you had? I have a 350 ml. I get code P0730

[@fieldtechnician5340]

After owning this car. Smh. Nightmare. My wiper, turn signal, fuel gage and power gate went out at the same time. I thought it was a relay fuse. Any suggestions?

[@jodsonnoel9256]

Look up Mercedes SAM module for your Benz. ML350/R350 they are in the passenger rear quarter panel, behind the tail light. Down in there

[@milsa06]

Do you think the ml500 the same

[@williamkennedy5492]

We need to see what happens after replacement was the car drivable or did it need programming first ?

[@blackston22]

Was saying drive the Car to a shop do not change gear

[@SaultiBalldeip]

@@blackston22 It still said that after putting in the new programmed ISM?

[@SaultiBalldeip]

Hey man, I assume swapping your module fixed your issue? Did you car start with the defective module still installed? Mine starts but cannot shift gears.

[@haydowayne]

Did this fix your problem did u get it adapted calibrated programmed to vin amd scn coded?

[@gwenboyd68]

Great video

[@vuphung7720]

Any updates on your ML

[@aduamashadsheriff223]

How much for ism r 500

[@benmwaitembo6346]

This is very helpful. Please let me know how I can replace an ISM which is malfunctioning and how it would be programmed or reset to my W164 vehicle. Where can I get this done for me?

[@mdushaka6403]

Is this a SAM Module guys??

[@glasser2819]

no this is an ISM ie. a "P-R-N-D" gear shifter, nothing to do with a SAM! SAM are Mercedes smart fuse boxes

[@SaultiBalldeip]

@@glasser2819 Well not a fuse box...Signal Actuation Modules (SAM) are modules (mainboards) that specifically carry out actuations/de-actuations and monitoring of specific components via areas of the car (rear & front).

[@technometricglk9252]

The easy way it's undo the drive shaft from the transfercase

[@chadwilliams7979]

Working German made vehicles best to remove d stuff

[@zemoney954]

🤟🏽👍🏽wheres the program?

[@blackston22]

I deleted the video by mistake but any autel MaxiSYS MS908 will do the job

[@vuphung7720]

My ML500 is doing the same problem. Please post a video for the programming part

[@totototototo6430]

Hello my friend, you are really a great person but you didn't show us how ism works on the car and we didn't see its programming

[@blackston22]

Will upload the video next you will need the Autel 908 to program

[@Colino9375]

@@blackston22 When will you upload the installation and programming video? I am about to attempt this, but wanted to see the installation and programming first. Thanks

[@KopiCraftwork]

Not really showing that how you actually removed the ISM, sounded like you went back to your garage , and searched for another one. It was a video cut. So was definitely not helpful.

[@alexidominguez9997]

Amigo. Mejor saco el cardan. Y trabajo más cómodo.

[@waynehazard-ql5sv]

All that just to prove others wrong 😂😂. Not worth the time.