Mercedes ML W164 W251 W164 Air Conditioning Control Unit climatronic

[@musp3r]

Thanks! Ordered the switch at tme, got it installed and working the same day on my W251. Used hot air to remove the switches, and iron to solder them back. Took me 20 minute to get the job done. Very helpful video.

[@ThekiBoran]

Thanks a billion. I just ordered 2 whatchamacallits from a company here in the US. I'll need to get someone to do the soldering but this will be cheaper than buying an entirely new control panel. Thanks again.

[@mathewgafa1933]

Thanks for the detailed video, I replaced both switches today in about 30 minutes. It would have been much longer without your help. Thanks again

[@adamrymbaba1727]

Dzięki kolego. Dzisiaj pół godziny próbowałem wyjąć płytki drukowane z plastikowej obudowy. W życiu bym się nie domyślił, że trzeba wylutować te trzy nóżki. Ale sobie wymyślili zabezpieczenie. Niech ich drzwi ścisną.

[@richarddavison9137]

fantastic can you please tell me where to get the switches from ?

[@richarddavison9137]

thanks for that after reading all replies i found the part number no worries ordered

[@benzexpert6784]

We were able to get this problem fixed with a software update here in USA. It became obvious to me it was software when I replaced the batterie(s) yes, plural. The main battery and the backup battery were both out of the vehicle for some time. After this it worked fine for a time, then acting up again. That indicated to me it was not hardware. If it was hardware, it would have still not worked after the batteries were reinstalled. Granted this requires a dealer and Star Diagnostic to load the update or a very good mechanic. In our case, we were having the balance shaft, intake manifold, power steering pump & rack and whole other slew of parts being replaced while the engine was out. Former dealer mechanic ran our ML over to the dealer and did the update no charge still had connections there. All that work was expensive, but then a new ML err GLE is what over 70 grand US. So...you decide. We're at 237K miles now.

[@Jay-qp4lf]

Can you please look at my blower board 2007ml350 constantly running even when the key is out

[@ZakDaToklosh]

Hi, W164 ML63 .....I had the compressor overhauled & changed the control module....a/c still inop. Which pins lead from the ON button back to the compressor, I’m thinking about hot wiring the compressor instead of letting the control module manage the climate. Your thoughts?

[@kaikourasunshine7205]

Hi! I have a W204 climate control unit, how can test it without the car, does this unit needs the can bus to start?

[@DrewFixIt]

Thankyou for your excellent video, what is the test tool that you are using? Is it just supplying voltage or is it it providing some sort of logic as well? Thanks Drew

[@mymercrepairs1097]

This is a device of my project It is the CAN bus emulator that sends the appropriate signals to the air conditioning module and activates it. Most systems in a car can be activated this way. I am already working on a newer version and will try to present some CAN tricks in a Mercedes

[@DrewFixIt]

@@mymercrepairs1097 wow, you are obviously very talented! Are you interested in sharing more details on your project CAN bus emulator so that others can also build one? Thanks Drew

[@mymercrepairs1097]

@@DrewFixIt Yes, I am thinking about sharing more details and making a video about CAN bus, but first I would like to finish some other projects

[@SusannahSprong]

What type of soldering metal wire are you using? It is a special thickness? And it looks like there are 2 types used? This will be only my second time soldering so I thank you for your help.

[@philipwilliams1754]

Solder and soldering iron.

[@archangels4you593]

Genius.... Thanks for sharing.

[@marivip89]

Hello, what are you use before you solder parts? It was glue?

[@mymercrepairs1097]

it is the soldering fluid that cleanses and facilitates soldering

[@ruthperdomo6811]

Quien me lo puede arreglar aqui en RD?

[@benlam4855]

Can you tell me where can I get those parts. Thank you.

[@mymercrepairs1097]

hello i buy parts in tme.pl

[@j.s.8877]

MYMERCREPAIRS could you share the code for this part

[@mymercrepairs1097]

@@j.s.8877 The part number is in the video 2:38 I used the panasonic ESE24MV1T part

[@mymercrepairs1097]

The part number is in the video 2:38 I used the panasonic ESE24MV1T part

[@j.s.8877]

MYMERCREPAIRS thank you very much

[@pitthebike]

twoja wiedza jest nie z tej Ziemi