Mercedes sprinter 2.7 timing chain marks and replacement

[@luckyeasystar2588]

Clear and spot on! Great video and great explanation! Many thanks!

[@JM8686]

Thank you for the comment nd for watching 🙌

[@MrDRSNUGGLES007]

Hey man. Thanks a whole bunch. Weldone. Much appreciated. One question.... The high pressure diesel pump sprocket. Can that be in any position? Thanks again

[@mariomaldonado3528]

hello im installing a new head on my 2.7 647 sprinter 2005. i noticed that some of the new lifters are different in regards that some you can squeeze some of them but others are hard to squeeze. should i install them like that???. thanks Mario.

[@patrickroehrich2362]

Hey Ed, what about the fuel sprocket, it has a dimple, is that important to timing?

[@baileysmith4800]

excellent video!! Thanks for making the video!!! Are there any tricks to putting the chain back on to the camshaft sprocket and the intermediate gear?

[@soarrich]

Can you tighten the head bolts without removing the cams?

[@g7puw]

Hi i have the 2.2 cdi ,i have just had head off and replaced it .i could not lock timing when i took head off as there was foreighn object stuck in one of the bores ,any way item removed and head put back i have tried to alighn timing chain with top dead center however i can not see any marks on the crank pulley so i am having trouble getting the chain in the right position especially when tensioner is not yet set .will i have to remove crank pulley to see where the woodruff key is ?

[@jamestayman9903]

How bad was making the new chain fit.??? How did you assemble it.?

[@JM8686]

Takes some time but anyone can get it done

[@ernestodominguez8310]

hello tengo un 2003 sprinter 12.7 y necesito reparar el motor o remplazarlo tienes alguno en venta?

[@IDK_Mr.M]

I am Taking one of These apart right now. The balancer will not come off I don't have the tool to lock the flexplate what would you recommend.

[@gregboyd4321]

Fabulous job! Ur a credit to ur profession. I would give u a pay raise if possible add well

[@JM8686]

🤣

[@MF-qv5ri]

is the same engine of ml 270 or c270 cdi? om612

[@frontlinemedia4270]

What about the idler gear with the dot? Oh, I see you said don't worry.

[@frontlinemedia4270]

Someone told me this is timed and it has something to do with noise. Where you align that mark, I have no idea

[@yzebrov]

Great video. I used your vid with a couple others to replace the cylinder head. But after putting everything back together, the engine had a hard time starting. And once it did, it was running very ruff, started having a clinking sound. The cylinder head was brand new. Any idea on what it could be? New valves. There’s some things that im trying to figure out if they were the cause: 1. When we were setting the engine to TDC while taking apart we cranked the engine in the opposite direction at least one of the times. Found out later that we’re not supposed to do that. 2. The injectors were outside for a month or so, it rained and parts on the shaft got rusty. Maybe the nozzles are blocked? 3. The timing mark, the TDC and the hole on the sprocket was slightly off. A little bit of the hole. But the marks on the shaft aligned. 4. The intermediate gear wasn’t aligned in anyway. But you mentioned not to worry about that one. I didn’t find anything about aligning it either. So I don’t think that is causing the issue. Any help is appreciated

[@JM8686]

Message me on Instagram 13b_dorito so i can send you detailed info and pictures

[@wowtaome]

Champion. Well explained mate!!

[@frontlinemedia4270]

You still have to have the chain on the right links. Meaning, the cam to crank gears. I'm guessing that the chain has to be taunt on the driver's side of the gears

[@Guachale]

What city are you located at? My 05 sprinters engine needs to be rebuilt,,😳😳😳

[@JM8686]

Gardena ca 13b_dorito my Instagram for more help

[@mikejohnson7768]

Your in Cali ,you got a guy around Atlanta GA you can recommend, thx

[@mariomaldonado4439]

What r the torque spec's for a Sprinter Engine starting with the mains, rods, heads, cams, plus any other. Parts. Ok I'll appreciate your help. Thanks.

[@JM8686]

Mario Maldonado hey sorry haven't get back at you and i have to make a video from my all data or ondemand,because those specs are not found online lol i will make a video and will be uploaded tomorrow ,and will try to cover most of the specs 👌🔥🔥🔥

[@JM8686]

Mario Maldonado what's the info on your sprinter?year and engine size?

[@eduardo26299]

La bomba de inyección va sincronizada?

[@vanlifebiker]

Does the 2006 have a chain or a belt??

[@JM8686]

Should be chain

[@andersfuchs9209]

oye campeon tienen alguno para vender? O algun shop cerca de la Frontera con tijuana/san diego que reconstruyan o alguno nuevo?

[@ludeboukema4111]

i was looking for marks on the camshafts now i found them

[@matsbugs1]

Thanks a million mate! Well videoed!

[@januszgawe478]

Many thanks from poland .

[@jeanmartinezmiaka2920]

Crystal clear!

[@skimowhite586]

Olle ermano I just bought a 02 Sprinter and there is a rattling noise coming from the engine and I'm pretty sure it's from the timing chain which need to be replaced it has a hundred and ninety thousand miles can I replace a timing chain without taking the engine out

[@JM8686]

Yeah you can replace the chain ,you just have to remove the whole front of the van

[@cransaftvalve734]

What year is this motor?.

[@georgiteofilov3785]

useful and great explanation

[@mariomaldonado4439]

Hello I have a situation. I totally forgot to install the timing chain guide rails. The head is installed and torqued. Any ideas on how to install the guides. With out removeing the heads. Och.!!!.

[@JM8686]

Dang sucks lol If the timing cover is off ,you might have a chance to slide them in

[@380vaults7]

Hi where is the timing chain adjuster for sprinter 313 3t 2011

[@chillia340]

My sprinter 313 2.0 diesel engine wont start, its just spins on start as if there is no compression. Any ideas? i parked it the night before and it was all good. I would always get a rattle for 4 seconds when i started it previously.

[@JM8686]

Check for compression,spark and fuel and cross your fingers because those engines cost over 8k to rebuild 😭

[@j.d.martinez153]

Good basic video man. Could you show the timming marks for a 6.0L ford. The cam and crank alignment in a video as well. Only found one that was from a shade tree guy. Thanks.

[@JM8686]

Thanks for watching and the comment I will make a video for that 6.0 ford,stay tunned

[@cando1943]

very well explained thanks

[@juanrios2526]

Thank you bro ✅. GRACIAS 🙏

[@dincert6492]

İn which milage must bu change ?

[@michaelolili3682]

Hello. I need a Timing Image OM646, 2006 Mercedes Benz. I overhauled the engine but it cranks fine but it Lacks the Firing Order from the ECU, it doesnt start. I would really appreciate the Timing Guideline for OM646, Mercedes Benz 2006, W211./Thank you

[@mikejohnson7768]

Where you located

[@marciopires1425]

Muito bom a explicação Gostei da explicação

[@isaacbckallon3965]

Good work

[@JM8686]

Thank you sir

[@allyblack290]

Need to change the time in chain on my 2014 Mercedes Sprinter Van 4 cylinder what Tool do I need to hold the camshaft

[@JM8686]

Thanks for watching And yeah they sell the timing set tool Don't remember the part # but all you need is look it up using your engine info

[@MasonNesson]

Very well said sir ! Thank you

[@KhanKhan-ev4wz]

Very good sir

[@ritzoner11]

Hey man I have the same engine I need some help on how to replace and fix rings and valves as well

[@JM8686]

That's a big job but can be done

[@kawilos8718]

How do I put back the tensioner?

[@frandsenmaalo9200]

Hie. Av got Ssangyong korando can u help me with the timing marks please?

[@JM8686]

13b_dorito my Instagram for more help

[@frandsenmaalo9200]

@@JM8686 will this work... Since i don't have Instagram?

[@trevorbyron9448]

Can you do timing marks for iveco daily 2005 3.0 l engine . Alternative ly fiat ducato promaster 3.0 l ( 2004.) Engines are the same, or similar. ( Has twin cam)

[@alexandrmelichar]

Good job

[@ludeboukema4111]

thank you tomorow i wil remove the head with your knowledge

[@JM8686]

👌

[@redasstankevicius8823]

Good work! Thanks!

[@JM8686]

Thanks for watching and the comment man 👍

[@MrQuist125]

thanks friend thats helps a lot

[@JM8686]

No problem and thanks for watching 👍

[@refiloemapitsi8501]

Hello my bro i am struggling to get M111 Mercedes Benz right may you please help me out

[@JM8686]

Yeah my Instagram 13b_dorito for faster response

[@allyblack290]

Is there a number on that tool

[@Twit.Tw00]

Excellent ! 😍

[@JM8686]

🙌

[@Boookoo]

Well done💝💝💝💝

[@hugosaavedra6043]

Hello Where are you guys located?

[@JM8686]

Gardena ca

[@hugosaavedra6043]

@@JM8686 ok I'm in palmdale california about 1hr and 15min from you. i have a 2004 2.7 dodge sprinter i would like to overhaul it. I'm trying to locate a good machine shop. How can in get in contact with you?

[@shiewaanwyeth5922]

Fantastic thanks

[@marciosilva3035]

What is the tightness of the screws of the control chain poles

[@JM8686]

Márcio Silva do you mean the timing chain guide bolts or the chain tensioner? ?

[@marciosilva3035]

I mean the poly that works with the pressure pump.

[@marciosilva3035]

I need to know what the screw tightening of this poly

[@sergioaviles4100]

hey marco estoy arreglando mi dodge sprinter ho solo es muy caro llebarla al taller pero si llego a ocupar ayuda como te contacto

[@JM8686]

Sergio Aviles jajaja kien es marco? i pues muy facil con señales de humo jajajaja es broma,puede contactarme aki por KZbin

[@andrieltorrespion8317]

Nice

[@josephkameel4117]

Mercedes benz c270 cdi

[@IDK_Mr.M]

Good video.

[@JM8686]

Thanks

[@IDK_Mr.M]

@@JM8686 cna you read my other post.

[@kumahjoshua7447]

Thanks u once again

[@JM8686]

🙌

[@93mrmm]

Hi man thank you so much can you send me the timing paper ? please

[@huseyinatlioglu7058]

merhaba 2016 mersedes sipntir euro 5 motoru zincir sente ilgili bana bilgi verirseniz sevinirimhello 2016 mersedes sipntir euro 5 engine chain cent i would appreciate it if you would inform me about the cent

[@antonioalvarez6811]

Muy bien video por casualidad lo tendrás traducido en Español muchas gracias

[@arisaris9697]

Hey my friend i have a dodge spinter and i cant find a macank and sobody fix it and left it smoking

[@JM8686]

Aris Aris sorry to hear that,can you tell me exactly what they did to the engine,like what did they replaced?

[@rightwingtrashrus274]

😂😂

[@AncapistanVan]

Tyvm

[@pedroshanchez5594]

Thank you so much..

[@JM8686]

Thanks for watching 🙌

[@allyblack290]

Thanks good info

[@JM8686]

👍

[@RationalComments]

Hey bro, te quieres venir a Canada para reconstruir un par de motores?

[@JM8686]

No wey jajajaja

[@andersfuchs9209]

@@JM8686 oye campeon tienen alguno para vender? O algun shop amigo cerca de la Frontera con tijuana/san diego ?

[@JM8686]

Que tal saludos,no tengo ninguno de venta,pero puedes buscar en "LQK . Com"

[@andersfuchs9209]

@@JM8686 que es eso? En mexico es facil de conseguir ese motor?

[@eternity4316]

thanks!

[@JM8686]

eternity4316 👌

[@Boookoo]

Good video.💝💝💝💝💝💝💝

[@JM8686]

Thank you for watching the video 🤘

[@andreabralski6082]

👍👍👍👍👍👍👍👍👍

[@desme2005]

orale muy buen video

[@arisaris9697]

My injacor was linking and i was i trying to change the bolt in sealwatcher and a white dude told me that he knew about those motor and he took the head off and i took the head to the machine shop he put it together and told me that one of the motor bolt broke on the block and that makes me wonder because the van has a blowby that gose trough the moneyfol and it goes trough the oil sprater and it injaced to the turbo and that the problem and ot smoke like a train but white smoke and i wonder that the way to get a check from the city for killing all the mosquito around the neighbor haha and the oil come trough the oil measurment stick and it seem that no one know anything in new Orleans and any tips could help maybe i could sent you a video but not today causes it 25 degress

[@JM8686]

Aris Aris man can't really understand you hahaha hablas español? Or what language do you speak? So I can help you better

[@titustizirai3706]

Kkk white dude

[@JM8686]

🤣

[@oussamabenkhedda2658]

Thanks

[@eduardo26299]

Como instalas los anillos de pistón?

[@JM8686]

Agregeme en Instagram 13b_dorito para mandarte Las fotos

[@eduardo26299]

@@JM8686 ok muchas gracias

[@eduardo26299]

@@JM8686 como te encuentro en Instagram

[@JM8686]

@@eduardo26299 👌

[@aslanyavuz2677]

🎉

[@mariomaldonado4439]

Guys I solved the problem.ok.😁

[@JM8686]

Mario Maldonado good to hear that 👌

[@stephencrabb4583]

HI EVERY ONE I CANT GET TOP DEAD CENTER LINED UP WITH THE HOLE ON THE CAMSHAFT LINED UP . ITS ABOUT HALF THE HOLE OUT . IF I CHANGE ONE TOOTH ON THE SPROCKET THEN IM HALF A HOLE OUT THE OTHER WAY. OR 5 degre on the crank pully . so my problem is should i be 5 degre advanced or 5 degre retarded? I know the chane has stretched

[@arisaris9697]

Si biejo ablo espanol

[@JM8686]

Aris Aris okay horasi explikeme por ke no le entendi nimadres jajajajaja 😂👊

[@arisaris9697]

My name aris

[@JM8686]

Aris Aris ✌

[@dekonfrost7]

Good work

[@LucianAiftimie]

Thank you dude!

[@JM8686]

🤘