Mercedes W211 Detailed Installation Android 10 Radio DVD COMAND & CANBUS / JUNSUN V1 PRO UPGRADE.

Junsun V1 Pro 4G with 4/64Gb MERCEDES UPGRADE HARMAN KARDON W211 W209 W219
we will be upgrading with video with front and read cameras + canbus buttons in steering wheel + pressure sensors + oem (24/01/2021)
the green long wire must be connected under the globebox in the canbus connector always taking a look to the right polarities +12v and gnd.
the rear camera just need pink cable 12v (reverse) + red cable from camera connector joint together to work out.
any other question just ask.
p.s. you need a 5m long cable to use radio antenna ar harman kardon units to plug from the trunck and use the original car antenna. otherwise just buy a new fm antenna and will be working fine.

[@Cryptokent]

Good music one of the few videos where the music doesn't drive me nuts!

[@Lu-eb7cl]

Although you mentioned @0:47 the canbus wire, that is the wire which leads into the glovebox for the auxiliary port. Brown is (-) , Translucent is your shield wire, & white (+)

[@josemanuelparramartinez8986]

Gracias por todo

[@patrickdeshields1596]

I love your video... I would love it if you did a talk through with the wires especially with the campus

[@hammondo7]

had to watch twice 1st time distracted by KISS😄

[@justingordon8007]

Where do I plug the original canbus into .. it seems like the only piece that has no where to go? The aftermarket adapters does not account for the fiber optic decoder I don’t think and forces me to possibly splice wires or can I avoid that I have the same Harmon kardon model

[@davidweihermann7962]

Hi Is the steering wheel button working if yes which canbus type have you choosen and have you wired the key 1 and key 2 cable where to

[@hasanisayli9078]

How did you remove “hidden box” in hazard light / heated seat area in middle . Did you get rid of that wooden trim and replace it with the black one connected to headunit ?

[@Unlnownn]

Same question here

[@aurelbabasa]

What canbus type you chose in stettings ??

[@julius8795]

Hey, what is the link for the screen you installed?

[@josemanuelparramartinez8986]

Ok,el conector canbus original de mercedes,el q sale en tu vídeo hay que conectarlo a algún sitio????

[@svr6135]

Hola, como esta la calidad del sonido del V1 pro comparado al autoradio original ? gracias

[@josemanuelparramartinez8986]

He cambiado la radio original y en tu vídeo sale el conector canbus en foto pero donde va conectado????

[@Kongzi93]

This video shows only a part of the procedure and only for one of the many variants of Sound Systems mounted in the W/S 211. And it leaves an important part unanswered. Once you have removed the "hidden box" with or without CD changer you will have to unplug it from the car, take the frontpanel off and screw it to the plastic Junsun frame below the head unit. This panel is essential. Hazardlight button, ESP, front airbag, seat heating, central lock,rear wiper/washer(S211). Junsun doesn't provide a cable to connect this panel to the car! (like Dynavin does) You wil have to carefully have to remove this cable from the "Hidden Box" by taking it apart. It seems impossible, but with alot of patience and careful observation you will succeed. It really comes apart! (Looking, carefully prying and pulling) You only need one side. If I remember well it was the left side(yellow) facing it. I'm satisfied with the Junsun considering the price and possibilities. SWC doesn't work, that is only the right side does not . Left side buttons are OK ( have to figure that out) But wireless Android Auto works. More than decent sound quality. The Junsun helpdesk (Zhou) is responsive and willing but only partially helpfull.I had to figure out the "HiddenBox" problem myself. They couldn't or wouldn't understand the "Hidden Box" issue.

[@charmantgl]

hi..how can i remove my cd changer completely..? ..cables for the buttons come through the box of the cd changer...

[@shawna7813]

Do you need a fiber optic decoder box for this to work or is it plug and play?

[@Atipecomputers]

Fiber decoder just needed for harnankardon

[@fooleelee6548]

@@Atipecomputers I have same radio how do I Kno of I have Harmon kardon

[@fooleelee6548]

Results

[@josemanuelparramartinez8986]

Buenas

[@Atipecomputers]

The hidden box must be uninstalled so we just need the buttons and nothing else

[@charmantgl]

hi..how can i remove my cd changer completely..? ..cables for the buttons come through the box of the cd changer...

[@josemanuelparramartinez8986]

Yo no lo he conectado a ningún sitio y tengo fallo de comunicación en la línea can,creo q será por eso

[@gustavoescate5560]

Hola, tengo un E350 2006 W211, al cual le he instalado una pantalla Android y he instalado un nuevo amplificador para trabajar directo y ya no con el sistema antiguo de fibra óptica, pero mi problema es que esta pantalla no tiene canbus por es pantalla universal, y no tengo forma de conectar el volúmen del steering wheel, como puedo solucionar esto?, debo comprar el canbus y algún cable especial para conectarlo al auto y funcione el control de volúmen en el timón?. Si consigo esto, donde se conecta este cable largo que sale del canbus hacia un conector?

[@gonzaloperezlazaro1822]

Puedes explicar como conectar los cables de fibra y audio que has mostrado a los conectores iso? Me acabo de comprar una pantalla también Android 10.0 y no me viene con ningún decodificador ni nada. Ando un poco perdido, me sería muy útil tu ayuda

[@Atipecomputers]

Dime si el tuyo es normal o con equipo harman

[@denisbasoc32]

Normale

[@josemanuelparramartinez8986]

Buenas,donde conecta el conector canbus de tres cables que sale en el vídeo y cuál es su función???gracias

[@Atipecomputers]

Hola los cables de canbus van conectados al canbus que está cerca de la guantera y se encarga de que funcionen los botones y las funciones del volante

[@josemanuelparramartinez8986]

Buenas,me refiero al conector de tres cables plano que iva a la radio original,los q van al conector que está cerca de la guantera son dos cables que salen del módulo canbus que viene con la pantalla nueva no???gracias

[@josemanuelparramartinez8986]

Buenas,ya conecté los cables de mi pantalla al conector que está bajo la guantera.pero en los ajustes de vehículo de la pantalla (APK)no sale el modelo de mi coche.como puedo hacerlo???

[@Atipecomputers]

Lo mejor sería que preguntases al fabricante del aparato

[@josemanuelparramartinez8986]

Ayúdame por favor

[@praporgicualexandru3522]

This video hat not all details lost of time