Part-nr - Sensor rear 2125420018 if your change front be aware that outside left and right has another part-nr 2125420118 - Expansion rivet 1249900492
@howardtomlinson38714 жыл бұрын
@@MB212 Not the part number I see on the box in the video?
@MB2124 жыл бұрын
It’s because it’s after market product they use other number. Number in video it’s MB OEM product for easy search.
@phillippblatt95203 жыл бұрын
Ich bin begeistert von der Ruhe, mit der MB212 dieses Video erstellt hat - ohne viele Worte, aber super aussagefähig. Note sehr gut!!!
@AndrzejKul4 жыл бұрын
Thanks a lot! The only video I have found which shows step by step removal of rear bumper in w212 wagon
@dzitiatri3 жыл бұрын
This is the best video. Dont forget to hold black plastic tabs strongly near thr lamp or you will cut bumper, it needs a lot of force. Good luck! I am going to check the radar sensors
@MB2123 жыл бұрын
Thanks for the information 🙏
@thanhtruongle87593 жыл бұрын
Hi! Can you show me how to download remove/install guide documents of MB W212 like you using for this clip?! Thanks a lot!
@MutieThePig Жыл бұрын
I love those folding towbars but they don't seem to be available here in the UK.
@softmetals3702 Жыл бұрын
Harpo Marx couldn't have said it better thanks
@torsteinv346 ай бұрын
Where did you get the repair manual? Where can I download it from?
@alfredepp10334 жыл бұрын
Please add narration to the video. It would help with little things like pulling the actual bumper off at the sides and small things like that. Excellent video, though.
@MB2124 жыл бұрын
Sorry not speak English but thanks for input try put more in detail with text next time.
@alfredepp10334 жыл бұрын
@@MB212 Oh, if you don't speak English, then just keep up the nice work. The video is much appreciated.
@andrewcox3686 Жыл бұрын
Great job Keep doing what you are doing! Thank you!
@LowreyContractorsUK7 ай бұрын
Thank you. Very helpful
@valerimuller40054 жыл бұрын
Thank you for help! Top Video 👍
@MB2124 жыл бұрын
🙏
@EKhaan4 жыл бұрын
Cool video and where can i get like this instruction i have w212 it's got liitle issues i want fix it by myself
@MB2124 жыл бұрын
Depend where you live, if you are in us I know you can buy this for a subscription but it’s very expensive, most take it down from different sites like eBay there can you buy it for 5$ search for (WIS) and you will fiend!
@MB2124 жыл бұрын
Sorry se updated answers (WIS) it’s instructions and (EPC) it’s parts catalog.
@longsilver26464 жыл бұрын
Super Video Weiter so :)
@cyberfandvd4 жыл бұрын
Amazing video 👌👏 Thanks for sharing !!
@Wilkinson773 жыл бұрын
Do you have a link where I can get the written paper instructions you're using?
@MB2123 жыл бұрын
Check eBay for “Mercedes WIS” they cost around 10 $
@andyschulze8854 Жыл бұрын
I put all Sensor new but still get the Red Dot in the Display but why
@danielbarnatt9332 Жыл бұрын
Thanks, very useful
@supernmtube3 жыл бұрын
Does your scanner diagnose the blind spot sensors?
@MB2123 жыл бұрын
Not sure about that. Not using this anymore. Now got the “real” Xentry and that’s same unit that MB use.
@howardtomlinson38714 жыл бұрын
What if you have no fault codes when you check the car, but its all red lights and a long beep when the car is put into reverse? Thanks
@MB2124 жыл бұрын
Then some of your sensor it’s probably broken it’s was same for me. Not sure why you not got fault code, what kind of reader do you use?
@howardtomlinson38714 жыл бұрын
@@MB212 iCarsoft .com product
@MB2124 жыл бұрын
It should show some code, but it definitely sounds like bad sensor you may take bumper off and look.
@howardtomlinson38714 жыл бұрын
@@MB212 Thank you I will take a look
@MB2124 жыл бұрын
It’s not that hard as it may look, but you should get sensor before it’s not a big cost for after market and it’s probably that you going to have to replace.
@Nimce0073 жыл бұрын
Curious if the same procedure would apply to a 2014 ML350 4Matic?
@MB2123 жыл бұрын
Probably same kind of engineering but could be some different things. You could check if you could access your sensors from underside if you like to change some out.
@worldpeace5853 Жыл бұрын
@Sam Nasr - Did you figure out how to install the rear sensor (blind spot assist) on you ML350?
@Nimce007 Жыл бұрын
@@worldpeace5853 No, ended up having the dealer do it.
@worldpeace5853 Жыл бұрын
@@Nimce007 How much did it cost you please? I heard the sensors are back ordered for a year.
@Nimce007 Жыл бұрын
@@worldpeace5853 If I remember correctly, it was $550 for the parts and $700 for labor. This was Dec 2020 in Cleveland, Ohio.
Don’t understand 🇩🇪 This it’s sensor nr 6 same as I show in video kzbin.info/www/bejne/b4eqk36ao6lnh7M
@stewartcarter64164 жыл бұрын
I think it is absurd that MB designed the car where you have to remove the bumper to get to the parking sensor. My sensor didn't go bad. Rather, when reaching in the trunk to get something my knee hit the sensor and it popped back into the bumper. I just need to pop it back in. When I talked to the dealer, he said if I broke the clip for the sensor, I would need a new bumper. I also want to file it on my insurance saying someone backed into me and left.
@MB2124 жыл бұрын
Agree it’s really bad that you not can’t reach them with out removing the bumper and the how they are placed with no protection collect dust and water and go bad. Don’t think you need to replace it you can do some easy repair sound bit crazy to change whole bumper. Hope it solve for you, it’s not that bad to do at home 2-3 hours.
@howardtomlinson38714 жыл бұрын
@@MB212 I was able to remove and replace them without removing the bumper, if you lie on the floor under the rear of the car you can take them out. Start in the corners where they are a little more accessible and you learn how they are attached. If you can get your car up on some ramps it makes it a bit easier, even if you only lift the car 6 inches or so.
@MB2124 жыл бұрын
That’s good info and you could change them all with out remove bumper? Witch one was broken in your case?
@StaceySweetJones3 жыл бұрын
That's what I did it was 10k fix through insurance
@Lewatchman2 жыл бұрын
@@howardtomlinson3871 You got the middle sensors from below as well?