My 73 280C has been a rolling restoration for 20 years 😂
@wayveyjayvey Жыл бұрын
First ever car project I started this month is a 83 280TE wagon. Literally doing the process each weekend. KZbin is great for self-teaching.
@graemelliott3942 Жыл бұрын
I never get tired of watching brake work! Caliper Headquarters!
@petercollingwood522 Жыл бұрын
Regarding safety. My 81 240D developed a very soft squishy brake pedal that went almost to the floor driving home from work one day and although the car stopped it took longer than normal and I could tell something was very wrong. I found a brake fluid trail behind the car from the road into my garage. It was coming from the right front wheel. Turned out someone had replace the flexible hoses on the front in the past and had screwed up managing somehow to install the right front incorrectly so that it "flexed" the wrong way. And when the steeing was turned full right lock the inside of the wheel rim just barely rubbed against the incorrectly positioned hose. Over time it had worn a weak spot in the hose and that day when I braked it gave out. Fortunately the rear circuit was not affected and that was what stopped the car. It was an eye opening experience for sure. Showing how much more the car relies on the front brakes than the rear, and also, never assume previous work has been done properly. Alwyas check yourself.
@Papieck37 Жыл бұрын
Here for the New series on rolling restoration
@frostwise87 Жыл бұрын
One of the most enjoyable KZbin channels to watch at the moment I think!
@pablom5725 Жыл бұрын
How cheap and satifying these repairs are!!!! Looks beautyful with the New parts!!
@7z5xf Жыл бұрын
Thanks Kent!!!!
@th3SyLvEsTeR Жыл бұрын
Dude you're so cool!
@benfischer6601 Жыл бұрын
Excited for part 2 of Old Spence :) kinda off topic but.. my recently acquired W123 300D has an annoying wobbling at low speed -- can't really feel it faster than 30mph except as vibration in the steering wheel. This is on FLAT ground. I suspect it's coming from the front-end right side. Any tips on where to look first? I haven't heard any whining/groaning noises so I don't think it's the bearings
@Mercedessource Жыл бұрын
Start with tires and then check for loose wheel bearings. Then move on to ball joints. Are the tires old? I have seen old tires do this.
@benfischer6601 Жыл бұрын
@@Mercedessource the previous owner replaced the following re: suspension 4x new Premium Tires (only a couple of hundred miles on them now) 4x new Bilstein shocks 4x new brake calipers, pads and fluid 2 front ball joints Upper control arms All of the labor was done by a shop and he even got it aligned, though I don’t know how well. In retrospect he was probably trying to fix this wobble too! I got a front end bearing kit from you so I’ll probably inspect and replace those next. On cursory inspection I didn’t notice any in/out play of the wheels. possible the alignment is just poor?
@benfischer6601 Жыл бұрын
@@Mercedessource we’ll update! Pretty sure I isolated it to a loose ball joint in the right hand tie rod end! Very happy to have found a definitive answer