Merry Fisher 605 Abholung und Einbau einer Planar 2D sowie Coppercoat Unterwasseranstrich!

Einbau einer Planar 2D Standheizung, Geber Anbau Airmar TM 150, Coppercoat Unterwasseranstrich.

[@clemens_mgd]

Hast du denn motor und Trailer dazu bekommen beim kauf oder wie

[@DenGronneBonne]

Where did you buy the rodholder on the roof? I cant find this rodholder in Norway. Nice boat by the way!:-)

[@oeminator1460]

Thanks for your message. The rodholder ist from the Merry Fisher 695 and he is customized from the "Schiffswerft Laboe" in Laboe.

[@sjakros1253]

What prop size are you running ? What's your RPM at WOT ? THANKS !

[@oeminator1460]

Sjak Ros I have a 19 degree prop and it turns to 5800-5900 RPM! The maximum speed goes up to 31 knots! With the 15 and 17er prop the engine turned too high!

[@oeminator1460]

The shipyard had tried the 15" and the 17" and both were turned too high. But there was the boat not too big loaded. I myself later tried the 17" again but with the 19" she drives faster. I have an Alu prop, unfortunately not a stainless prop. My travel speed is about .18-19,5 knots at 4000-4100RPM and the consumption is between 15.5 liter when I´m driving alone and 17.5-18 liter per hour if we are 3-4 persons on board with equipment.

[@sjakros1253]

Hi again, Prop's now 19, and no more rev limiter. At what hole is your engine mounted ? Mine's in the 2nd from the top, but I'm noticing water spray. Cruising speed is 19kn-35km/h at 4100rpm, fuel consumption 2,3 km/liter (same engine as yours). THANKS!

[@sainbedir6836]

Guten Tag habe genau das selbe Boot kannst du eventuell eine Beschreibung mit Fotos am besten ein Video hochladen von der Heizung weiss es nicht genau weiter besten Dank

[@oeminator1460]

sain bedir. Vielleicht dank für deine Nachricht. Kannst du mich sonst bei Facebook anschreiben (OE Minator), dann mach ich dir bei Gelegenheit ein Video und schicke es dir dort!

[@DenGronneBonne]

Sendt a mail to Schiffswerft Laboe, but they didnt have the drawings of this model they said:-( And just wondering, who are the artist doing sweet dreams?

[@oeminator1460]

They have a steelman come let the simply the rod holder of the 695 has adapted a bit more, not more!

[@DenGronneBonne]

Ok, was it the rodholder for 695 Marlin? The 695 Marlin-rodholder I can order in Norway. I have ordered a Merry fisher 605, its delivered to me in mid july. Its equiped with Garmin radar, autopilot and 115 hp Yamaha. It would be nice to have a rodholder that you have, Im planning on using the boat for fishing/trolling in saltwater in Norway:-)

[@oeminator1460]

Yes it is the rod holder of the 695 Marlin. It was only slightly adapted ;-)!!! On the outside he had to be bent a little.

[@oeminator1460]

The suzuki is more economical, faster in acceleration and has a tax chain. My consumption at 18 knots are 15-16L per hour! Before I bought the 605 I am tested with the yamaha 115 and the suzuki really has a lot more pressure. Because of an autopiloten I think also ;-)

[@melanieweihaar3901]

Moin echt schönes Boot !!! Wo gibt es die Rutenhalter am Dach der Kabine?

[@oeminator1460]

Melanie Weißhaar Vielen lieben Dank. Das ist der Rutenhalter der Merry Fisher 695 der dann angepasst wurde!

[@melanieweihaar3901]

Vielen Dank

[@oeminator1460]

Gerne, falls möglich auf jeden Fall bei der Bestellung wenn dann für den Suzuki entscheiden!!! Ich bin sie vorher mit dem Yamaha Probe gefahren und der Suzuki hat wirklich um einiges mehr Druck.

[@onkelrocco3951]

Wenn man den Ton ausstellt kann man es ertragen. Bisschen mehr Info über die Heizung hatte ich erhofft.

[@oeminator1460]

Fiebig R. Die Hoffnung stirbt ja bekanntlich zuletzt...!😂

[@Stralsund83]

Fiebig R. Oder einfach nach Infos fragen, bevor man meckert!!!