Messerschmitt BF-110E

FULL BUILD of a detailed model in 1:48 scale from Eduard.
Pilot, Lt. Felix-Maria Brandis
This is a summary build, more detailed videos are here:
First Part of the build:
• Messerschmitt BF-110E ...
2nd:
• Messerschmitt BF-110E ...
3rd:
• Messerschmitt BF-110E ...
4th:
• Messerschmitt BF-110E ...
Kit of German WWII twin-engine heavy fighter aircraft Messerschmitt Bf 110E. Plastic parts: Eduard, marking options: 5- decals: Eduard- PE parts: yes, pre-painted- painting mask: yes- resin parts: no
The Messerschmitt Bf-110 is a German twin-engine heavy metal fighter with a double tail. The engines used were Junkers Jumo 210Ga, Daimler-Benz DB 601B-1, Daimler-Benz DB 601F, Daimler-Benz DB 605B-1 engines with power from 700KM to 1475KM. The first prototype of the Bf-110 took off in May 1936. The first mass-produced version of the Bf-110 was the C version, which production started in 1939. Version C was regarded as a heavy fighter and performed on average in the September campaign, but much better in the French campaign. However, too heavy and too slow, the Bf-110 suffered considerable losses in the Battle of Britain, which meant that it was systematically moved to the Reich Defense units as a night fighter, which eventually led to the creation of the G and H versions. They were used as night fighters and interceptors against allied bombing expeditions. In combination with the on-board radar (eg FuG 202 or FuG220), the Bf-110 became a very formidable enemy for British bombers. About 5,800 copies of this aircraft were manufactured in the course of production. Technical data (version Bf-110C): length: 12.3 m, wingspan: 16.3 m, height: 3.3 m, maximum speed: 560 km / h, rate of climb: m / s, maximum range: 2410 km, maximum ceiling 10500 m armament: fixed - 5 7.92mm machine guns and 2 20mm MG FF cannons.
Music by Bensound.com/free-music-for-videos
License code: UOG8WZGMSLYMMZ1V
Music by: bensound.com
License code: 1VARZ0NR1Q4U1SRN

[@markc7002]

Ultra realistic weathering techniques, subtle and effective!!

[@modelfun]

Thank you 🙂

[@leesouter9627]

Every now and then a build turns up on KZbin that has the perfect filming for the viewers to watch , sometimes you don't need a running commentary, and this is one of those builds.

[@modelfun]

Thank you very much. For watching and for good words!! :) The main reason I try to replace natrafiono with subtitles is that I can't stand my voice. When I watch my video's it is the first thing I would change 🤣🤣🤣

[@TheScaleModeler]

Well done my friend lovely build. I built a 1/72 version last year but after seeing this I think I may give a1/48 a go at some point 👍 I think you decision about the camouflage line and the nose was correct 👍

[@modelfun]

Thank you for watching and leaving the comment 🙂.

[@lucjanakurowska2915]

Mega jestem pod wrażeniem wykonania.Brawo 😊👋

[@modelfun]

Dziękuję:)

[@gordon8753]

Awesome job!!! I'm going to build this in the winter and this video will definitely be my inspiration! Thank you very much!

[@modelfun]

Thank you. I'm happy you like it, and event more happy you find it valid to help with your build. Thanks for watching. Enjoy your build! Cheers:)

[@MGB-learning]

Outstanding video and presentation.

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@normansmith8184]

Superb modelling sir. I especially like the mottling, so effective. Congratulations on great work.

[@modelfun]

Thank you 🙂

[@lesthiele4921]

Greetings my friend, the Me 110, has turned out perfectly, congratulations on the excellent build, best regards from Australia 👍👍👍👍

[@modelfun]

Greetings:). Thank you for watching and good words as always. I'm happy you like it :)

[@neilhaas]

❤😊 Thats interesting info about the plane aircraft turboprop. A double tail, the armaments are important.

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@peterdiepenthal4090]

That’s fantastic you would never now it was a model if it was used as an extra in the back ground

[@modelfun]

Thank you 🙂

[@clivedunn2653]

The level of detail is insane. Thoroughly enjoyed watching

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@robertstickler5232]

Greetings from Austria Great Work Gratulation

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@zoltarOi]

Niesamowity relax przy ogladaniu Twej pracy. 😊 Szacun za talent.

[@modelfun]

Dziękuję;) fajnie się czyta takie komentarze. Pozdrawiam

[@jackbob-ww4xy]

I really love the bf110 and your modeling!

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@jeffreyross-zb8cz]

Absolutely fantastic Mate! Watching in Detroit, beautiful

[@modelfun]

Thank you for watching and leaving the comment 🙂 Cheers!

[@freddakin7119]

Outstanding!

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@DeLanScaleModels]

Just found your channel and you did an fantastic job on this beauty. And of course i left a like and a sub.....can´t wait new videos

[@modelfun]

Thank you. :) Greetings

[@jayrohumbertoguzmanvalenci1351]

Excellent work!😊 It's a beautyful plane, ready to the showroom. Thanks for all the tips, specially the CA glue over de wax candle, it's very great and usefull. Greetings for you, from Guatemala, The Land of Quetzal Bird, Símbol of Freedom.

[@modelfun]

Thank you for watching and leaving the comment 🙂. I'm happy you like it. Greetings from Poland:)

[@Ralle1968]

Excellent!👍👍👍

[@modelfun]

Thank you for watching and leaving the comment 🙂

[@davidharrington1133]

Building this at the moment, super small parts and quite challenging

[@modelfun]

Good luck and have fun with your build.

[@jimjo.]

Nice work. Maybe you should drill the exhaust outlets, so that they look more real.

[@modelfun]

Thank you. Yes, that would be much better for sure, I just did not have small enough drill bits to do that.

[@OlliLow]

Very, very good work. I have the same Me-110 it`s stil waiting to work. Sehr gute Arbeit. Ich habe die gleiche Me-110 ist aber noch nicht gebaut.

[@modelfun]

Thank you for watching and leaving the comment 🙂. Happy modeling!

[@howardcobb4354]

Quite brilliant - the build and the edit. I'll see what a mess I can make on my kit trying to emulate yours . There will be no video evidence of it 😊

[@modelfun]

Thank you. It is not the easiest one to put tegether. Note- in my build I had to decide till what extent I fill in the gaps in the landing gear gondole that goes through all the wing. As it ends in the movable flap- it should actually have some gap in between. I filled it all the way, so in reality this model would not be able to fly. But at that time I decided to leave it like that not to mess it up with the gap rescribing. Just wnated to let you know, so you do not copy it. Anyway, the model is huge as for 1:48 and looks nice on display, so I wish you fun and enjoyable build!

[@frankschenkewitz3900]

Cool

[@salazarju1]

Tengo tiempo de usar el pegamento que utilizan, evapora tan rápido que cuando se intenta pegar las piezas, como él tutorial lo muestra, ya no hay pegamento que sostenga las piezas.

[@johntreloar8203]

Very nice build my friend, I got this kit last week and can't wait to build it, I have seen this kit built by a few modellers and all have had to use putty on the wings, is this a problem? is there a large gap to fill?

[@modelfun]

@johntreloar8203 Thank you very much. I'm glad you watched my video and you liked it. As for the fit issues, I think it's a problem with this kit, and you have to be ready for it. Despite careful processing of the elements, and several dry tests, I was still unable to fit the parts perfectly. The problem concerns the connection of the wings - fuselage, engine nacelles - wings, and matching the nose section. With a caveat, when it comes to the landing gear nacelle, which connects to the flaps in the wings. Here I had a dilemma whether to fill the gap entirely. In a real airplane, there is probably a gap between these pieces to allow the wing flap to move.

[@AndiK884]

I liked the build and the film😊 But the animation of the text at the bottom I found annoying. Maybe you can change this next time 👍🏻

[@modelfun]

Thank you for watching and taking your time to share your opinion. I value your comment it will help me ceratę better videos. Will work on the subtitles in my next video. Cheers!

[@sparker4614]

👏👏👏👏👏

[@elguapo7754]

samolot stoi w Technikmuseum w Berlinie 😊

[@MohammadSadeqBozorgnejad-mv7rr]

You do your work very meticulously and obsessively, good luck.

[@modelfun]

Thank you.

[@jakubspirk1990]

Nice job. But how could this poor airplane take off and land? When you clogged the flaps behind engines with putty🤔.

[@modelfun]

Yeah, I had a dillema there, I know there was a gap in the real aircraft, but for sure not as big as I got initially on the model :) Well, good catch. Thanks for watching!

[@carlosspiceyweiner3305]

The engine fit was a nightmare for me.

[@modelfun]

Yes it was not the best, I event went too far and filled the gap beneth thta actually should be left.