Metal Mastery With Kyle from Carter Auto Restyling!

Hi guys! Kyle from Carter Auto Restyling was in the neighbourhood this week, so I coerced him into giving us some restoration tips for your rusty classic! I figured out "V8 Showdown" 1958 Studebaker was a good test subject, so let's get busy!
Also: We just got in a new shipment of "Same Old Shit" coffee mugs, so get them while they last, haha!
Oh! I do not have a Telegram account or any bullshit contest going! Do not respond to any of these "contest winner" replies; they are a scam.
Thanks to everyone who subscribed to our channel here, and thanks also for all of your "likes" and comments!
"Dean's Greasy Flips" beer cozy is at:
www.coldwarmotors.com
Or, please feel free to check out our Patreon page at :
www.Patreon.com/coldwarmotors where we have extra videos and pictures and a bunch of people hanging out and bs-ing about cars!
We have set up a Paypal Donations Page if you'd like to help out the cause here... Very much appreciated! Here is the link:
www.paypal.com...
Mailing address:
253, 22169 TWP 530
Ardrossan, Ab
Canada
T8E 2J1
#mopar #engine #testdrive #vintagecars #mechanic #redneck

[@coldwarmotors]

Hi guys! Kyle from Carter Auto Restyling was in the neighbourhood this week, so I coerced him into giving us some restoration tips for your rusty classic! I figured out "V8 Showdown" 1958 Studebaker was a good test subject, so let's get busy! Also: We just got in a new shipment of "Same Old Shit" coffee mugs, so get them while they last, haha! Oh! I do not have a Telegram account or any bullshit contest going! Do not respond to any of these "contest winner" replies; they are a scam. Thanks to everyone who subscribed to our channel here, and thanks also for all of your "likes" and comments! "Dean's Greasy Flips" beer cozy is at: www.coldwarmotors.com Or, please feel free to check out our Patreon page at : www.Patreon.com/coldwarmotors where we have extra videos and pictures and a bunch of people hanging out and bs-ing about cars! We have set up a Paypal Donations Page if you'd like to help out the cause here... Very much appreciated! Here is the link: www.paypal.com/donate/?hosted... Mailing address: 253, 22169 TWP 530 Ardrossan, Ab Canada T8E 2J1 #mopar #engine #testdrive #vintagecars #mechanic #redneck

[@daviddaniels6473]

I tell that old joke frequently. Every time I meet a fellow southpaw.

[@anthonyteves2939]

Lmfao..love Kyle's bullshit..makes it fun and entertaining

[@smiffy1071]

We wholeheartedly approve of left handed people!

[@williamdalbey4867]

Awesome collaboration! You and Kyle work great together.

[@Mike-xt2ot]

I needed this video. Not just for laughs but I realized my technique was way off. Thanks guys!

[@error52]

I honestly don't know how the two of you managed to keep a straight face through all this. That's some Monty Python level of self control, right there.

[@coldwarmotors]

Oh! There were many failures there... a lot of editing, for sure, haha... Cheers!

[@glennnickerson8438]

A straight face is easier with facial hair...😆

[@smarternu]

The car only had a flesh wound!

[@markellsworth2814]

@@smarternu It's had worse!

[@yannschonfeld5847]

Hilarious and incredibly professional. Who needs a garage when you've got an umbrella? A masterclass repair. Kyle is amazing.

[@IR-nq4qv]

the smear technique of hand sculpting fiberglass was truly amazing...like I was wowed

[@MikeyMack303]

@@IR-nq4qv Don't forget using electric tools in the rain!

[@michaelstoliker971]

Kyle is like the Bob Ross of Body and fender repair. They are not happy little accidents.

[@butcher390]

Hahahahaha !!!!! 😆😂🤣🤣🤣 Good one ‼️

[@richardbauer8195]

OK, the ad that came up in the middle of the video was ACTUALLY for the Pebble Beach Concours d'Elegance!!! Hilarious! The Pebble Beach folks will be VERY PROUD to have their event associated with this high quality restoration work.

[@enginecrzy]

High Brow...

[@smhorse]

😂😂😂

[@kingcountrytowing]

Oh man I didn't realize the Studebaker was getting the full Barrett Jackson treatment. Mantis style filler application is a seriously boss move, thanks for the demonstration

[@Zero-Fox-Garage]

I loved the trolling of Dan at DD Speed shop...while you were wearing one of his shirts. LMAO!! Gentle, gentle, just a little schmoo here...and there.

[@rumrunner1756]

The kind of day where I thought nothing could make me smile and found myself laughing throughout this video. No wonder this is my favorite channel. Thanks guys. 😅

[@ericargo9157]

Nothing compares to the Saskatchewan Sling when it comes to laying down any kind of product especially a mountain of it. I can tell Scott really enjoyed Kyles visit. I hope there is more mayhem and de-butchery to come.

[@mattfarahsmillionmilelexus]

This is seriously the best bodywork tutorial video since the Dodge truck door. Just minty.

[@timwerner7771]

YES! who could forget the entire door panel made from kitty hair!

[@Gerk8]

Ah somebody else remembers the Dodge truck Roman arch door repair. 👍

[@purdueguy681]

Roman arch

[@dagwood64]

I also like to get metal filings from the grinder and the lathe and mix it in the bondo so if someone comes by with a magnet it will hold. LOLOLO

[@matthewbakker8113]

This reminds me of the Ram door rust repair... 😆

[@jerrywesterfield5636]

I was just thinking the same!

[@totalutternutter]

It's very inspiring to find out I've been doing bodywork right my whole life

[@geoffreysmith3196]

No license plates required as backing material. The mark of true professionals! 😂

[@scottsinaz3000]

A lot of street signs go missing around Scotts house.

[@orlenbrown4293]

Soda pop cans were a personal favorite.Rivet over the hole and beat the edges down to mud over the rivets.

[@virtuestreams2616]

Learning is fun-thanks to both of you! Professor Kyle it was a pleasure to see you in action and Scott, cheers to being an excellent student! ✌🏻

[@JimmyWatches2102]

Kyle was certainly gracious to reveal his metal working secrets to the world through your channel. I truly expect this video to go viral.

[@johndonlon1611]

Don't laugh. This car could very well end up at a Mecum Auction and then be an episode on Uncle Tony's Garage.

[@CharlesAtwell-or7bm]

Poor dude got took on this Stude! Let’s dig in a little and see just how liberal some people are when it comes to body work! I bet that engine is not original either, let’s see.

[@DefaultName-vh3lo]

One just can't beat the quality from Kyle and Scott. My week is now nearly perfect with this priceless education!

[@PaulinesPastimes]

Hey! That's how I did all the rust repairs on my Austin! Nothing wrong with it. A blind man on a galloping horse would never see the difference. 😄

[@dh2360]

Enjoyed the educational video.... This is the kind of promotional video for the hands-on trades they should show in school!

[@ericwhitehead6451]

"Fumes make everything better". No truer words ever spoken!😆

[@waiting4aliens]

Truly a master of the"Puke and run, money up front, " school of parking lot bondo repair. An inspiring lesson.And he was Frankers approved.

[@lazypurplepeeps4393]

The greatest pair of metal workers on youtube by far!!

[@jamesglenn2006]

This was hilarious ,I loved all the metal work . The huffers tent during the product removal was awesome .😂🍻🚬

[@timwerner7771]

"Huffer's tent! HA!

[@blaircrocker9845]

Nice. its been awhile since i saw a sketchy late night dust in.

[@stevenwithanS]

What a treat that was. I was hoping you guys would meet up and do something together. Pure entertainment.

[@countswing284]

All that metal work and not even one fire, most impressive! Cheers! 😎👍🏎🔥🏁🏁

[@coldwarmotors]

Glad you enjoyed it!

[@marscruz]

No fire but plenty of smoking... apparently. Off camera of course.

[@timwerner7771]

I am laughing out loud as Scott blathers on while Kyle is bashing that old sheet metal! hysterical!

[@roadmasterk6019]

Very impressive, as always, but I was startled by the complete lack of spray foam🧐

[@TireSlayer55]

I haven't watched the whole video yet but if they're true professionals I expect to see a rocker panel repair using a 2x4 and some fiberglass.

[@chazer200]

OMG!!! 2 Of my most favs, just putting the shit to hack body workers out there! I cannot recommend these 2 Gentlemen enough! This was sooo FUN to watch. THANK YOU!!!!

[@robertbisson964]

I did that type of repair ONCE, many years ago using door screen , bolts and nuts to minimize the body filler, newspaper will also work as a hole filler. Keep in mind that body filler does not rust. ( lol )

[@johnbutler5650]

I am not fluid in Canadian, but since you guys were speaking the universal language of Sarcasm; I was able to follow along very well! Thanks guys!

[@prieten49]

It's great to see two masters at work! Those repairs looked really good, from about 4 yards away...

[@lenscap8925]

That's 4 houses down, right? LOL

[@prieten49]

@@lenscap8925 House yards! You're too funny!

[@saramalou9649]

you support nazis i see...

[@victorbitter583]

Like the car I am currently trying to sell. Looks new from 5 yards away. Just waiting for someone to turn up in the rain.

[@stuartstephens]

I hope Chip Foose is watching this for some valuable tips.

[@loudmouth383]

Man I never laughed so hard watching someone pound a car with mud 😂 tell your new sensei though he forgot to fill the holes with washcloths and plastic bags stuff with newspaper before laying down that sweet fiber 🤙

[@jeroensmit2520]

Only true professionals can do without pre-stuffing

[@timwerner7771]

I worked on a Corvair where the previous bodyman used a pink kitchen sponge to fill in the lower fender before he bondoed it up!

[@loudmouth383]

@@jeroensmit2520 true and professionals have all that money for those fancy self tapping screws, real men use pop rivets 🤣

[@harleyveejay]

What a treat seeing you guys working together and thanks to Scott for turning me onto Kyle's channel a couple of years ago. I watch every episode on both. I wore my "Fury shirt" to a car show and got some looks, they were Camaro and Nova guys you can tell.

[@charleshill9236]

Kyle is a true craftsman. You should let him do the final touches on Laura's Rover!

[@michaelschwartz6834]

The Foo Foo can treatment is AMAZING!!!!

[@jaygorveatte7955]

You guys obviously had a great day, despite the rain. Looked like fun. Lol

[@heatherkohlwey8379]

You thought it would be dumb, I mean fun, to have Kyle join you. You guys don't need a botanist. You need a psychiatrist. Or a few more darts. That looked like a great time. Cheers!

[@amped5234]

It's nice to know I've been doing it correctly all along.

[@manfredschmalbach9023]

Lefthanders have been a special breed ever since I reckon ...😂 Saskatchewan swing versus Albertan affluence was quite the interesting comparison of styles - the frugal neighboring swing also spares a lot of taping and paper covers, obviously. Thanks for the laugh in the morning (Europe, Ya know ... ) and Cheers!

[@classiccarrebuilds2771]

When two legends meet, metal magic happens...🤔🤣🤣🤣🤣

[@mrksimm2002]

Beautiful job.... very impressive... haven't seen that kind of quality anywhere north of Tijuana...😮

[@anthonywright774]

[@brianbethel9929]

Scott, that was freaking awesome. And it didn't look too bad??? Thumbs up for Kyle and cheers from Wisconsin

[@jorgefernandez-mv8hu]

That is some sketchy auto work there that was a lot of fun to watch. Two masters at work on metal repair. What a fun episode to watch. The next challenge should be a body work challenge like this on a whole car. How good can you make a car with nothing but Bondo and filler with a touch of rattle can. Then try to fool one of the agents. What a great episode! Yes, I am subscribed to both your channels.

[@tonyboloni64]

I thought Chevy Vega's Anti Rust Umbrella was an industry first. Didn't know they "borrowed" it from De Soto.

[@JerrysThisandThat]

Myles will be happy, that has to add at least 15 horsepower Lol. Cheers Scott, Frankers and Kyle.

[@dantiel4179]

I feel so inspired with this new technique to go forth and tackle the next body project 👍😃

[@eugenewhite6762]

"That's an old lowrider trick" is up there with Jim's Alf line!

[@ianrosie4431]

I've got a hammer just like that in the shed. I'm going to start on the dent tonight. Thanks guys 👍.

[@rivenmotors7981]

The perfect surprise mashup that we always hope for, so many pearls of wisdom and practical techniques. The only problem is now it has been established we will only want more of this free edutainment!

[@ronaldbrown5745]

You two play off each other so well that you could take it on the road!

[@Marlin-proboscis16]

Awesome to see Kyle Carter and his masterly body work touch. I was so impressed with that beautiful repair on the Studebaker. Pure class. 😜

[@davidpotter7484]

Definitely need to share this video with my neighbor. He is using these same techniques to 'restore' his 71 ford f250. This will help him master his skills to sure.

[@andyfloyd8583]

The lack of Kyles cats in this video is noticed.

[@21greg7]

Was a shame Tom wasn't available - with his keen eye - to critique the repair process & colour matching styles.

[@kensherwood4866]

Well I didn't know what to expect. I've come to like the Stude more and more. Sat with a coffee watching I started laughing as Kyle worked away hammering out your commentary 🤣. I noticed you gave him the right side of the car, well he is left handed (or "cuddy wiffter" as they say here in the NE of England), till he came to paint spraying when he's right handed! At first I admired his determination to work in the pouring rain more than his results, but as things progressed I was impressed by what he, and you achieved outside in poor conditions on what was a tidy up. I'm impressed.

[@jamesbergeron8356]

I've been doing it all wrong. No wonder it takes me so long to do bodywork. Thanks for the tips!

[@charleykeenan6171]

Bravo 👏 Funniest show anywhere! KZbin, cable, broadcast.. No one holds a candle yo you guys! Hope to see Kyle on the "Big show" Saturday! And actually your statement "all those cars at the auction? This is what you are looking at.." Spot on. Cheers.

[@Slingshotgixxer]

" Play along you F***er" made me and my wife laugh out loud.....:)

[@spurgear4]

I would like to see the IGA flyers jammed into the rocker and slathered in kitty hair method of structural repair next time. I had a good laugh, thanks guys I needed it.

[@timbumb123]

Wow great to see..In the rain..that was a first for me to see..great job ..experts .both of you...

[@mikesonneson2824]

I've been subscribed to both of you for a long time. CHEERS!

[@Awsom47Merc]

* Hey I was just thinking (Oops). When team Studebaker shows up and sees the miraculous repairs you can tell them " It was like Christine, I stood back and said ; Show Me ! " 👊😎👍

[@jmpsavescars]

What a treat guys just a spectacle of icepicking and hand filled panels!

[@henryszubielski8601]

You two were a riot! 😂😂😂 Thanks guy's.

[@lmoore5264]

I grew up just down the road from a friend of mine who in his teenage years became quite proficient at fast body work. But he had a trade secret he never shared with anybody but me. When he came across a rust hole that needed filled he snuck into the bathroom and grabbed a handful of his mothers kotex. He would stuff the hole full and when the bondo got them wet they would swell out and make backing for the repair that was better than screen. He did get some cussing though when his mother would head to the bathroom closet for said product and found none. Oh my God did I just let out his trade secret? Now everybody knows. You two had me rolling in the floor laughing. Hope there are many more endeavors like this for this duo ! The only thing that could have made this video better is if Dean was there to drink beer and hold the camera.

[@liljoeii6091]

Wow, that turned out really good. Thank you for the video

[@anthonycarty9433]

Wow ! You've really thrown the gauntlet down now to Jonathan W . Even though his roadster looks demon , he's going to have to raise his game by some margin to keep up with you pair of Aces .

[@ihrescue]

Outrageous and exceptional restoration work on that classic.

[@pcbullets8726]

That came out really well. Hats off to Kyle! Cheers!

[@aberration3869]

The praying mantis technique finally broke me lol.😂

[@mowler8042]

Laying bed and the wife said “it’s that car show” when she heard the tapping. How long was Kyle there?

[@beatglauser9444]

I sometimes did shit like that on dying beaters. If you have a bodyshop, people are not supposed to see giant rust holes. If you drove fast enough, people could not see the repairs.

[@AstraWerke]

Ah, the good old trade of the coach mason. Not many people around anymore that know to perform this craft!

[@brianmaynard7320]

What a riot!! I was busting up laughing. Even spit my beer a couple times!! Lol Great video!! I loved it!!

[@kevinmarwick6675]

no beer case used at all lol behind the kitty hair .... was a fun project to watch guys !!

[@nazdagg1945]

back in 90's I was doing boat repair and bought a Milwaukee angle grinder and one of the optional attachments that turned it into a 'orbital" sander. very nice, easy to handle. I ran 36, 80, and 150 on it.

[@dangoodall-williams4200]

I lost count at how many times I laughed out loud! "OH no, I have a run!" The best!

[@terrywilliams667]

When your KZbin subscriptions collide!❤😂 Love it!

[@richardlincoln8438]

Would definitely gather praise from DD Speed Shop. Top Drawer mud slinging. 🎉

[@anthonywright774]

Thanks, now I know that fiberglass sticks to wet surfaces I can repair my sunken sail boat and raise it with Glad handle tie lawn bags.

[@robertwells6454]

👀🤣🤣🤣 that thing is going to be a Corvette by the time You Guy's hit the road. 👌

[@shake9574]

Wow. Just like Grasshopper and Master Po

[@arise2945]

Ahhhh, that poor old Studebaker. They sure like to rust and are they ever good at it.

[@lawrenceharp6396]

The Stude is beginning to look like new! I used copious amounts of moist wadded up newspaper and cardboard to fill in the deep speed holes followed by fiberglass when re-styling those same areas and then some on a very crusty white1969 Rambler American Station wagon. After creative bondo and sanding I blasted old smelly white oil based house paint from the basement over it mixed in with a little thinner, no primer. It was mint at 10 feet away. Can't wait to see more special bodywork on that ' 58 ! Please cherry it out with more...

[@kennethreiver985]

This is absolutely hilarious , reminds me of the time you fixed the Dodge Truck door ! When you get done you should paint it Resale Red 😂

[@jonathangehman4005]

Is that legendary underground comic artist R. Crumb!? He slings bondo with as much finesse and elan as he does ink!

[@JAY61ish]

The filler application is proper craftmanship..superb stuff... i am in awe of this body repair.. 😂😂👏👏👏👏

[@CharlesAtwell-or7bm]

I always did beat and flake all the scaly stuff out before I slathered on the body filler and I had never seen a tutorial on it! Must have been smarter than I thought!

[@CharlesAtwell-or7bm]

Shoulda added that a wire wheel on a drill would have prepped the area a little better perhaps?

[@richardwohlers5245]

3 rows of duct tape on the rocker panels and rattle can - good enough for auction cars in the 70’s

[@smhorse]

I recently watched a KZbin video of a Citroën DS restoration where the owner discovered that the tops of the sills were almost entirely formed from duct tape 😂

[@garyschulz9216]

O boy!! Good thing this was all in fun. I’m so glad that you really have the talent to do things with metal as you do Scott. Will check out Carters recycling when I get a spare tire ah… moment. That was some impressive buttering up though. As you stated, ready for auction but we know that the ‘Ol Studebaker is going to win the grass drag. Especially with Myles sneaking in some, we’ll Plymouth Poncho tricks, oops did I just put out a spoiler? Well, if it doesn’t win, it’ll be a close second. Good luck Ashley and team Vic. The Stude just got more aerodynamic with a bit of smear. Good luck to both teams I’m enjoying this.

[@tomdarnell4369]

This was hilarious. A collaboration for the ages.

[@dannypeter6565]

Some great technique with the hand laid filler, a true arteest. The strobe light is giving me seizures . Cheers!

[@Mocker9091]

The biggest fear about bodywork is fear itself. You two make it look easy. Hell, I can do that. yeah, right....a bushel of fun tho. norm

[@davec9244]

Damn if I had known Carter was left -handed, I would have sent him a can of left- handed rust. He had said he haven't had enough rust to make it thew the winter. thank you stay safe ALL

[@brucekettle6056]

I laughed so hard watching this one.. Brings back so many memories.... Why is everything so shiny? Breathe deep.. Ha!

[@watsisbuttndo829]

It doesn't seem that long ago that this sort of repair was pretty much the standard pre-roadworthy check tidy here in Australia.

[@ianslow1234]

all it needed was a bit of flashing blown in from the next door hay shed for the rocker panel

[@Mercmad]

@@ianslow1234 And a tin of bitumen and a bottle of turps to brush over the repairs to make it look really professional .

[@cme2cau]

Oh yeah, grease and oil change followed by rust and putty change.

[@victorbitter583]

@@ianslow1234 Roof guttering can make for some awesome rocker panels or sill panels as we call them here in Aus.

[@classicvolvorestorations3848]

Carter on his summer holidays. 👍😀