Benchmade 560BK-1 Super Freek - Overview and Review

Shop DLT Trading - dlt.link/2VmYv2A
Shop BHQ - shrsl.com/28zd2
Shop GPK - shrsl.com/26cwo
Shop Going Gear - shrsl.com/2k1km
My Patreon - / metalcomplex
--------‐----------------------------------------------------------
SUBSCRIBE TO KNP! - / @knifenutspodcast
Going Gear EDC Club! - shrsl.com/2k1kt
Follow me on Instagram @metal_complex
Become a Member of my channel! - / @metal_complex
Check out my merch! - www.redbubble....
--------‐----------------------------------------------------------
--MOST RECOMMENDED--
Spyderco Shaman - shrsl.com/2cx8d
Spyderco Para 3 - shrsl.com/2cx8p
Spyderco Kapara - shrsl.com/2cx8e
Benchmade Freek and Super Freek models - shrsl.com/2cx9q
Benchmade Griptilian LARGE - shrsl.com/2cxa6
Benchmade Griptilian SMALL S30V - shrsl.com/2cxae
Benchmade Crooked River large and small - shrsl.com/2cxan
ZT 0562 - shrsl.com/2cxau
Hinderer XM-18 3.5" - dlt.link/3dH1xVG
Hinderer parts and accessories - dlt.link/31scasT
Civivi Praxis - shrsl.com/2cxdf
Civivi Elementum - shrsl.com/2cxdj
Cold Steel American Lawman - shrsl.com/2cxd2
Ontario Rat 1 (LARGE) - shrsl.com/2cxdn
Ontario Rat 2 (SMALL) - shrsl.com/2cxdo
CJRB Feldspar - shrsl.com/2cxdy
--------‐----------------------------------------------------------
#METALCOMPLEX
**DISCLAIMER** This channel's content is meant for educational purposes only, and encourages the proper/safe use, handling, and understanding of tools. #everydaycarry #edc

[@metal_complex]

Whether you found your way here from Nick Shabazz's "New Reviewer" playlist, or just stumbled upon my channel by random chance, thanks for taking the time to check out my content! I have around 300 videos currently, so if you enjoyed this one, I'd love for you to take a look at some of my other stuff! Thanks again, and have a great day!

[@chipsndip2255]

I’ve been EDCing this knife for 2 years now amazing knife

[@clincher3751]

It's weird going back and watching this now and not hearing "In this case the Ritter Hogue"

[@abc456f]

Had a $40 credit at dlt trading and ordered one yesterday for $151. Very cool looking g10 with the red liners and standoffs. The coating is cerakote which should hold up better than dlc, I believe.

[@bquick80]

Cerakote will hold up better with corrosion resistance but dlc is way better with wear resistant.

[@JuanMendoza-nl9fn]

Correction from somebody having bought a freek today. The "red liners" are actually another slab of g10. It's just a big bugout...

[@apstech4618]

@@JuanMendoza-nl9fn Bugout has FRN scales, not G10

[@SliceyDicey]

Just put my first impressions up also. Pretty close to yours unsurprisingly! I actually meant to post mine at 8 tonight but clicked the wrong button lol. Love everything about it other than the coating.

[@bigtankmcmillan4622]

Just scored on 1 for $150 today...your video sold me on it...feels locked in your hand...super freak is a total package...keep up the videos!

[@Skidz1818]

I got mine today for 155

[@genarosepulveda9260]

Holy, it goes for 225 on knife center

[@JuanWick2010]

I’m eyeing up this M4 super freek like Gollum and the One Ring. Was about to pull the trigger on acquisition. Then you put it next to the Rat 1 and my head exploded 🤣 😂😅🤯🤯 I am now considering the mini 😂. Kidding! 👍🏼👍🏼👍🏼

[@frankrice1253]

I see it like this : its a very kinky knife--- the kind you dont take home to mother.

[@metal_complex]

LOL

[@SliceyDicey]

Frank Rice Comments like this Weill never stop no matter how much it annoys Benchmade.

[@frankrice1253]

@@SliceyDicey --- Im sure BM does'nt care, as a comedian yourself, I think you can apriciate how much our community (knife) could use a little humor. People take this shit way to seriously. That in iself, is funny to me. 😛

[@armandcouture4655]

@@frankrice1253 another fellow Dead head knife geek!

[@Cliff_Dixon_42]

It will never let your spirits down!!

[@handsclasped]

Great Review MC, I already ordered one. I did want to mention, I don't think Benchmade uses DLC coating. They have experimented with a couple different coatings so far, but they haven't really adopted one as their own yet. They do like to come up with proprietary items for their brand, but I'm sure they are using quality coatings nevertheless. Can't wait, thanks again.

[@RICHSTER2U]

well i can hardly wait mine is ordered and should have it in a few weeks this knife looks amazing and fit my hand like a custom made glove that was made for me .That is what sold me on it.I thought it was a bigger knife from all the videos i seen of it but after seeing it in person its not all that big compared to what i pack every day any ways but loved the review video thanks!!!!

[@carknelson5895]

I bought the super freek based on how much I love the first freek. The original freek is so light and the fwack sound when you open it is amazing. The only thing that makes the super freek better for me is that I can put it back in my pocket with one hand. But using two hands to put my knife away is almost always a thing... loose pants pocket and tight pocket clip gets you the same outcome.

[@Osprey1994]

Got mine for 10% off and it is an awesome knife. Wouldn't mind a satin blade option but it looks good like this. Centered, rock solid, even grind and sharp.

[@mitch_edc]

I just handled this knife at a local knife store. I’m wanting to pick one up and thought I’d listen to the review! Seems like any knife I’m interested in there is a review here. Thanks Metal!

[@markgoldstein6265]

Always enjoy metal compkex point and down to earth approach to reviews.. Plus doesnt take himself too serious ..

[@anything_knife_related5647]

Just received mine today and I must have got a lemon. I was so excited to get this knife. The centering on mine is favoring the show side to the point where it’s almost touching the scale. Even disassembling and trying all the centering tips didn’t fixed it. Even if I tighten the pivot as tight as it will go doesn’t even get close to center. I pretty sure the grind is way off and almost looks like the tip is bent slightly. The axis lock bar is getting jammed but sometimes it needs time to break in. I’m going to contact smkw tomorrow and see if I could get a replacement. Not sure how that passed inspection 🤷‍♂️. So far I’ve seen your video and Slicey dicey video and you both had centered blades I’m jealous

[@tonycanniffe2360]

Brian Wallace I got a regular Freek with issues, the main one being the scales were misaligned. I sent it back. They still let some go out that shouldn’t pass muster. Pity.

[@7grahamh]

Thanks for doing what you do. I just found your channel and the super freek is now well over 200 now. I just bought a Praxis and I bought it because of your review. Thanks

[@geomardomingo1672]

Just bought one, i can attest the prices for this knife has gone up.

[@elzippo488]

what else did you expect? Democrats are supporting everyone but Americans with our Tax Dollars. We tried to tell ya'll that the 2020 Election was completely rigged and stolen , but all the sheep wanted to continue to play mask-queer-aid and booster pin cushion games.

[@dustinwhitt5297]

If it wasn't for you and Best Damn EDC, I'd have a bit more money in my bank and a bit more depression in my soul. Thanks, brother! I'm getting one of these next week. Already have a Manix 2 in S30V and an Elementum in S35VN.

[@whatfreedom7]

Can’t believe for the price they didn’t include a deep carry pocket clip. That’s something just about everyone wants yet some companies like spyderco don’t even use them on a lot of knives. That should be a standard part at this point.

[@elzippo488]

Regarding the tiny torx screw critique. use a fresh and correctly toleranced torx bit driver and you won't have any problems. The hardware is top notch!

[@JRWahrhaftig]

Excellent! So much like Nick Shabazz; just turn up the nasalometer and do a mock Nick video in case he has that contest again. :D

[@manifestgtr]

The m4 freek is the nicest benchmade since the 940, imo. There are other benchmades I really like…love my adamas and griptilian…love the aesthetics of my crooked river. But the freek is better. It’s one of the few benchmades with actual, high performance blade geometry, m4 is phenomenal, it’s got Spyderco caliber ergonomics. Just a great knife altogether. My only complaints are the blade coating and the name. If it had a stonewash and a non-embarrassing name, it’d be right up there with the 940 for me.

[@pauldayton5285]

I'd love to see a comparison between the Freak & the Manix 2XL. Both in the M4 version !

[@Bboykidcombo]

G10 and a dip in the jimp "Super freak" 👑 😜 🙏

[@jessd1952]

I am currently waiting for my super Freek. Should be here tomorrow and I am stoked as I have never had an expensive blade. I am very curious in the M4 steel and how it cuts and sharpens. I can shave with my RAT (D2) but it doesn't hold its razor edge long.

[@keng3510]

How's the knife so far

[@Shadowx011]

I recently purchased both the Griptilian 511BK and the mini version and had someone do custom Carbon Fiber Scales on the 511 and Orange G10 scales on the mini. I absolutely love them but the full size is my favorite. I may add this knife to my EDC collection. Thank you so much for this video it was so informing. “Griptilian on Steroids”…I like that saying. 😎 Subbed :)>

[@xxcaseyxxc]

I must have this knife soon, it's eating away at my soul lol 😂😂😂

[@rrf899]

On sale for 175 on ebay. I bought one on reddit for 155.

[@monkeyfaceII]

working down nicks playlist a few everyday really good review of the freek and wow 2000 vids is impressive! ill make sure to check out a few more once i get thrue the playlist (just subscribed too) the contest sure is helping me find more people in the community!!!

[@metal_complex]

I really appreciate your interest in my channel. To be honest, I only have about 200 vids. Either way, thank you for your support 😊

[@monkeyfaceII]

Metal Complex haha I read your comment wrong lol I thought it was 2000 not 200 lol

[@metal_complex]

😁

[@carlosbishop6386]

I had rocked the casbah for about two years just ordered this today hope it’s sweet !

[@mark.lizettegrant]

Metal my girl is getting me the same knife for father's day I wanted to tell u cus if it wasn't for people like u and red and a few others I wud of never got in to this hobby my zt566cf (cus of u)and the freek is my most costly knives

[@metal_complex]

That's awesome!! What an amazing gift! I'm really glad to know I helped a little 😊👍🍻⚔

[@puritydvoyd2978]

Yup it starts with $50 knives. Then $100 knives. Then $200 knives. Then $400 knives. And it just keeps going.

[@yourAVGconsumer]

Sucks that this knife has gotten so expensive. I just looked at it today at Basspro and its $253. And that's even cheaper than u can find it online. It was my favorite knife of all they had. I just can't justify spending $253 on a knife. I could get the Hogue Sig K320 classic for just a tad under $200. And that's an amazing knife as well.

[@TerminalM193]

Look at the Doug Ritter Hogues. It's litteraly a MUCH better version of the freek at literally half the price with your choice of either 20cv or magnacut steel.

[@Shanes_Sharp_Sheet]

I've never ever been so excited about a bitchmade knife! Can't wait to get one!

[@ARes13FOX]

Was that a typo haha

[@Treeguy-ny6vb]

“Bitchmade” hahaha love it! So appropriate!

[@JustAnotherDayToday]

Not a huge Benchmade fan-the mini bugout was a disappointment to be honest but the Super Freek might be the one. Never understood though why Benchmades have 50% liners or why so much FRN in some of their models.

[@bp-hx9ts]

The super freek vs the spyderco pm2 knifeworks m4 cf exclusive are a good comparison I originally gonna go for the pm2 but I think I like the freek more

[@Deadtileyedie]

I know this is old but i like Benchmade but I havnt had the best luck with them. The freak I had the lock was getting stuck and centering was not great. I ended up selling it. I still have a custome shop grip that's decent. personally from my experience Benchmades quality control is hit or miss. I've had multiple versions of the pm2 and they have always been flawless. Of the 2 the pm2 is bay far superior.

[@JensenAzotea]

This knife definitely wins in the looks category 😎

[@sharpwhits0167]

As my knife tastes have evolved, I have grown to be bored with benchmade. But this knife? Yeah, this is one from BM that is on my short list of knives to pick up.

[@terryboylstein472]

Looking at this next. Good collector one. I like the red liners

[@kenide55]

I need to know why you don't like the pocket clip. 🙏 I just got mine. Saw one for a deal compared tonthe website and she to get it cuz my original Freek got more or less stolen and I really liked that knife. This is much nicer than the original! Got mine at $225 vs $280 online from Benchmade.

[@jimfreeman3636]

With my Super Freek, the factory 25 degree edge was holding a very sharp edge and with very good edge retention. After 6-months of hard use, I had seen no sign of chipping or any edge deformation at all. I though, well M4 is tough, so I dropped the bevel to 20 degrees, and man what an improvement on an already fantastic steel. Slicing became easier as well as sharpening. Just a few strokes on a fine diamond will bring a dulled edge right back ro hair popping. And, still no signs of chipping or edge deformation. I do like CPM M4 very much

[@dalecarpenter8828]

the cold steel tests proved G10 to me ! I get rid of the thumb studs !

[@nobodysreview6137]

They shouldnt even put thumb studs on an axis lock knife.

[@bigtankmcmillan4622]

Definitely need one now

[@RickyHuse]

Man this thing looks awesome! I can't to see it 😉😉

[@wrjames38]

Awesome knife...love the materials and look of this BM. I'm still trying to decide between this SF and the Carbon fiber Axis Stryker from Knives ship Free.....real world problems. Lol

[@ARes13FOX]

Buy both, like I did haha

[@wrjames38]

@@ARes13FOX I probably will! If you had to choose? The axis stryker is sooooo nice. WORTH the 50 bucks more? Thanks

[@ARes13FOX]

@@wrjames38 it depends on if you like the carbon fiber a bit better. Honestly it would be a flip of the coin if I had to choose. I hard use both and neither has disappointed me. The freek is a bit bigger making the stryker a tiny bit more pocket friendly if that matters. Either way you go, you're going to be happy.

[@wrjames38]

@@ARes13FOX I knew you were going to say that. Thanks...

[@Onthebluffs]

Mine needed a good sharpening when I got it. Great knife for sure tho.

[@macmccartney5760]

I have a super freak, I thought it was cerakote, guess I'll have to look into that , got me second guessing myself, your most likely right and I have a bad memory

[@mybaddadventures144]

I wish they offered this on the custom store, because its not there been thinking about a blackout mini crooked river

[@markcase7892]

Great review, thanks metal complex.

[@sambrown4424]

Still trying to decide if I want another cartridge liner knife like this since I own a couple grips or something else with a full liner... kinda like the heft of beefy knives

[@metal_complex]

I'm with you. I honestly would have loved to see this knife with full steel liners at about 5.25 - 5.5 oz, just for the joy of the added heft.

[@tonycanniffe2360]

Contego? The KW exclusive in M390

[@49giants3]

Tony Canniffe hey Tony. How you doin brother

[@inntit4093]

Having trouble picking up paper pieces? STAB THEM! GRRR. :)) Great vid as always!!

[@dortiz1968]

Good review, I may have to look into this one. But is this model 560BK-1? I'm not seeing the 550bk-1 anywhere.

[@metal_complex]

560bk-1*

[@jirinafrankova166]

Its a cerakote coating blade not DLC. And I dont see so much similarities with Griptilian.... I think these are really different knives.

[@terryboylstein472]

Nice vid. Do they make a serrated one?

[@Patriot-rising]

So the Mini Super Freek is like Baby Deadpool! Haha! Can not wait for Deadpool 3. Or the dang new John Wick.. Okay I stay once again off topic.. The cikd air is freezing my last brain cell apparently. 🎃👻 yay! Halloween is almost upon us! time to pull out my customized 940 with pumpkin head scales! I want scales with bats.. sorry people. On a serious note have you ever checked out the Rukus 2 or 9600? I like this knife a lot.

[@bringruckus7900]

I’ve always been a gun guy. I have a bunch of cheap knives. I’ve just recently been doing research of quality knives. And this super freak definitely caught my eye. I’ve also noticed the grey/blue griptlian. I’m a huge fan of the colored back spacers. Are there any others out there that are colored?

[@metal_complex]

Definitely. So many its hard to name them all. You can also get custom scales layered almost any way you want, and lots of colored backspacers. Head to google and type "benchmade griptilian custom g10 scales/backspacer". Lots to look at 👍

[@Airplanetyson]

The crooked river has a nice back color

[@lordnicenstein5105]

MC what do I do I can get a suoerfreek or a giantmouse Ace Grand for 40 bucks less than the regular prices, which do I pick?:S

[@metal_complex]

Superfreek!

[@m1henry]

Love it but find myself selling all DLT coated blades as they show scratches real bad from use.

[@evanponsioen6087]

Trail Blazer this one is cerakote, not dlc

[@Airplanetyson]

How does the black finish hold up? Does it scratch easily?

[@VeryBadRussian]

Yes it does, but if you use the knife not a biggy

[@common-sense-is-dead]

16 minute video review and not one mention if the blade has any slack in the open position. The first thing I do when I hold a knife is check to see If there's any play in the blade from side to side when open.

[@danokitemanotoo1791]

It's a great blade!

[@bullridermusic2054]

Well I fuckeed up you said that is goine for $190? I just picked up mine from cabela's for $250 damnit.

[@Londue]

Do they ship this to the uk

[@canadian8764]

I’m in Florida ain’t no way I’m getting M4…

[@BryanGardiner]

You kind of screwed Benchmade over on that video did you use two hands that's the whole point of the modern knives is being able to operate it with one hand buy you an old Buck 112 but you have to use both hands to operate it if I were them I would not send you another knife after the way you did that video

[@Patriot-rising]

" A tripod and the power of the internet " ... Haha! I love that! Far superior to " have the web and an armchair therefore I am a true master of everything ' . I ran into a armchair warrior on a forum last night who apparently served at the same time in country as I did. But he wasn't sure what his MOS was or what I was even talking about ? Go figure .. He probably walks around his hometown with all sorts of odd metals hanging off of his boy scout T shirt. Just like cloned knives that are undeserving , there are also people out there who just never will amount to anything. And let me say this , being a disabled member of the armed services I find it rather distasteful. Okay back to the ever so cool knives that we all wish we could own. Actually if I purchase another knife this week I may become a homeless new divorcee as well. Yikes! Knife fever people it is a real thing. Wonder if I should set up a go fund for future knife purchases? Haha!

[@chandlersanders]

Is it on bearings or washers?

[@metal_complex]

Washers

[@Cahwai]

Only benchmade in production to this date is the Tengu flipper line.

[@happyknife8785]

You can always pick a Benchhmade hater from a mile away, and they're usually a Spyderco fan boy. Despite you "recommending" this knife as a good purchase you are so much harsher on Benchmades than any other make, especially Spyderco which are significantly over rated.

[@gunznstuff300]

What's frn

[@metal_complex]

Fiberglass reinforced nylon (tough plastic) 👍

[@jeffreylc]

No more Benchmades for me! Bad enough after last week’s debacle. This Super Freek is a ripoff of Doug Ritter’s design. Just ordered his Hogue Ritter RSK.

[@davidmarshall7752]

I have an MK1 G2, great knife but the Freek is better.

[@Cahwai]

You know Doug Ritter designed the Griptilian and the freek is a longer handled griptilian right?

[@nobodysreview6137]

Too small, bring back the Bedlam.

[@sharpwhits0167]

I'll say it MC, the pocket clip looks very fallic.

[@jarrettm3728]

Who else is tired of bullshit plastic n not even g10 on benchmades?!

[@streettuff2623]

Keep your bias of fn

[@metal_complex]

I probably will 😉

[@dalecarpenter8828]

yeah you know that's about inline with the usual benchmade customer disloyal greedy way way high price ! So! I bought the clone in jade G10 for $28.10 with proven edge holding D2 ! and it does not have benchmade springs another ! the handle is to big in both directions !

[@metal_complex]

It costs $28 because it's made in China. Always cracks me up when people think they somehow got a "great deal" on a cheap clone. The thing you're holding costs less than a dollar to make. Congrats on the purchase 😆

[@donwilson1296]

Way over priced🐴🤣

[@ARes13FOX]

Nope

[@donwilson1296]

Way over priced🐴🤣

[@bp-hx9ts]

Don Wilson not really but ok