Meus Racing Isokinetic Axles For The Traxxas TRX4M

In this video I check out the new isokinetic ‪@5mm‬+5mm axles for the Traxxas TRX4M by Meus Racing! These are great looking axles that not only look good, they perform! Offering 52 degrees of steering, 3-piece CVD front axle shafts, and an overall gain in width of 10mm, these are going to improve your steering and stability.
Order the axles here: www.meusracing...
Cape Crawlers Merch: capecrawlers-s...
Affiliate links:
Tower Hobbies:
Horizon Hobbies:alnk.to/aLFxP5n
Amain Hobbies:
FairRC: shrsl.com/3w3co
Discount codes
5% off RCAWD: rcawd.com/?ref... - discount code CapeCrawlers
$10 off any order $100 of accessories: www.fmshobby.c... - discount code Capecrawlers
5% off any Injora products: www.injora.com - code Capecrawlers05
10% off any Little Guy Racing Parts products:
littleguyracin... - code CAPE10
10% off any Flubberstufferz products: flubberstuffer... - code Flub10CC
10% off any Cow RC products: cowrc.com/ - code CAPECRAWLERS
Email me with suggestions or collaboration inquiries: [e-mail]
Follow us on Instagram @capecrawlers!
Timestamps
First impressions and key features: 0:37
On the build: 3:11
Indoor course runs: 4:49
Final thoughts: 10:45

[@CapeCrawlers]

Timestamps First impressions and key features: 0:37 On the build: 3:11 Indoor course runs: 4:49 Final thoughts: 10:45

[@RCRookie805]

Always coming with these clutch vids!!! Congrats on the 100K Adam!! 🎉❤

[@keldonator]

They have a 4ws kit of these now too, meus is killing it. They also have some capra axles in the works with this iso kinetic thing in the works

[@jonathanmcdonald5411]

Nice vid! Those new axles look really cool. The prototype motor/esc combo is packing some serious punch.

[@Crafty925]

Could we get a full breakdown of everything you’ve done to trx4m, I love the axial setup and the very wide stance! Great video also!!

[@joseaponte2829]

Wow I like the new axles from Meus... I haven't upgraded my Axles yet on any of my TRX4Ms because I just use the 7mm hexs. But I wouldn't mind upgrading my Bronco with this great spec axles from Meus.

[@hubsessed]

So when you say 'Tuning', what are you referring to? Suspension, weight, limiting straps? Maybe a little more explanation of what that looks like for the problems we are seeing in this video

[@Bonitacreekrc2]

will the furitec venom starter pack fit in a ax24?

[@AhmedAli-my9we]

Hello my brother, how are you? I installed my yesterday but I don’t have 52 angle steering when I steer. It doesn’t give me the full steering I tried with my stock I got more steering them meus axle do you have any idea how I could get full steering help 🙏

[@nathanntzbs]

you need a longer horn on your servo

[@AhmedAli-my9we]

@@nathanntzbs 🙏🙏 I have injora sevo what with the shirt? Horn and I want to upgrade the longer one, but I don’t know where I could get one from. Do you have any idea, my friend where I can buy a longer arm

[@nathanntzbs]

@@AhmedAli-my9wei think soon they will release a new version of these axles that solves this problem. at least that's what i heard

[@smrdmr1]

Some customers state thatthe servo mount has to be changed to get the full steering these axles create? Yea or Nay? Love your vides!

[@fellers1983]

With that steering angle.. you plan on drifting it too?! Lol.. that is insane and it looks good!

[@quentinh4316]

I have installed on a ir40 build but i can only get the turning to go one way 52° the right turn is like stock not all the way. I have the injora T6 remote and the end points are adjusted them all the way and ony the one side turns alot

[@erinyorke6774]

What should I use for oil shocks, I’m planning on getting some but I don’t know which ones I should, I’m considering either getting the injora 39mm shocks, the proline big bores or one of the rcawd oil filled shocks, which ones should I get?

[@RCCrawlerz209]

Speaking of which... You gonna get the Traxxas light bar for the TRX4M K10?

[@AhmedAli-my9we]

Can I use the axle shafts on the treal axel housing or the stock

[@starbuck5728]

The flex blades are the culprit I bet.

[@callsignmohas5190]

Im a huge lgrp supper 8 fan but man these look sweet. Might get a set

[@Sir-jibs-crawler]

Thinking about getting one what modes should I get first

[@justinluczak5611]

Pump for the is review I’ve almost ordered them 4 times

[@jammy_drift4069]

Get a set on the tarantula building one just now after your review

[@scooter2202]

Driveshaft upgrade?

[@stilsjx]

@capecrawlers what is the green glow coming from?

[@CapeCrawlers]

The injora esc in there

[@slickster3211]

What are the barriers to putting these on my SCX24? The mounting looks the same and the think the drive shaft is the same?

[@CapeCrawlers]

I think the driveshaft may be your only hard stop. Suspension geometry and linkage placement may be a little wonky, but workable. You could possibly drill out an scx24 driveshaft to fit the larger diameter shaft on these axles though

[@sk8rboyben1]

I know the Bronco is technically better for climbing and stuff, but would I really be missing out much if I pick the Defender instead? I’m from the UK so Land Rover “speaks to me” more.

[@CapeCrawlers]

Nah, you could still make it a killer performer. I’ve seen lots of great defender builds

[@DrKVo13]

What servo can I use to make turn all the way ? Just got one of these axle. But the injora 7kg turn less than 80 degrees. Maybe the meus servo? Please help.

[@CapeCrawlers]

Reefs and nsdrc both make a micro winch servo I believe. There’s a modification you can do to the emax servo to make it turn continuously.

[@DrKVo13]

@@CapeCrawlers thank you ! I’ll try the meus servo first. Since it’s the same brand as the Axel hehe

[@chinocontreras2772]

What driveshafts did u go with have the same axles on my high trail and my injora driveshafts won’t work

[@logustagears4917]

Sense there blue id say there traxxas but im not sure

[@WestDesertRc]

With the scx24 version could u put those cvds in stock axles

[@erinyorke6774]

No the axels are I think 10mm wider than stock so they Probably wouldn’t fit

[@g405t]

Betty went flying......ouch

[@dragosbogoi]

Aren't these axles just like Injora's?

[@CapeCrawlers]

Very similar but they have brass diff covers, heavy brass knuckles, and more positions for your rear links, plus they include the three section CVD axles that give you that wicked steering angle

[@jacoblowenberg5763]

What tires are you using

[@CapeCrawlers]

Proline trepadors

[@dukecarew]

what size? they look huge

[@MetalTheDragon]

now if meus made a portal version of these for the trx4m

[@logustagears4917]

They do!

[@SuksesSmart]

I wanted to buy one for my Bronco but the website have bad reviews, people saying they haven’t received any response for two weeks, It’s that website legit?

[@CapeCrawlers]

I get most of my Meus products from Amazon. But they are certainly a reputable company and I wouldn't hesitate to buy anything from their site

[@scooter2202]

Driveshaft upgrade?