Traxxas TRX4m Free Suspension Upgrade.

[@killerbassin]

Hey man update after about two months running this setup and the articulation is night and day compared to the stock location. Thank you so much for the tip gonna make my f150 a stock mod so things like this are very crucial🔥

[@ToppersRC]

@@killerbassin Awesome! Glad to hear you’re enjoying it🤘

[@Poland_RC_Adventures]

I did this mode to my K10 recently. What I've notice is that the front tires started to rub the shock springs when taking a full turn left or right. What I want to do now is to put 10mm hex from injora and trim a body a bit. it shoud provide enough roam for tires. Did you have a similar issue?

[@ToppersRC]

@@Poland_RC_Adventures I had 6mm hex on when I did this but it was to give the tires clearance from the steering knuckles. I didn’t have an issue with the front springs. I think I may have trimmed the body a little bit. I have since lowered my K10 & had to do a fair amount of trimming.

[@ZenNiklaus]

You need to widen the stance, either extended axles or and added spacers.

[@chrishorrobin3073]

On flat ground. Iv took the body off and now the left wheel just touches the floor. Might be a weight problem not shore doesn't do it with standard gearbox weird .orderd alloy wheels hope this works. Thanks for advice mate

[@ToppersRC]

@@chrishorrobin3073 make sure the gears all mesh up. Does the body make a difference too? Maybe need to shave the body some?

[@Jfy8hc]

Love the wheels and tires on you Chevy truck. Can you possibly let me know what that set up is?

[@ToppersRC]

@@Jfy8hc they are the Traxxas beadlock wheels & 62mm Baja tires. 👍

[@Jfy8hc]

@ thanks so much!

[@clayton1270]

This will work on my Trx4m Bronco (stock) correct? Also any other diy tips/tricks/upgrades for the Trx4m? There's not a lot of content on these little guys, but yours was awesome! New sub and like!

[@ToppersRC]

Thank you! I think it should work with the bronco shock mount too, I don’t see why it wouldn’t. I’d try to figure out what your driving style & base your build around that. I actually have the bronco stock mounts in the normal location in my k10 now. I need to make a video on my current setup bc I think it performs pretty amazing but still have more to do. I’m testing out having cut springs right now which I’m liking. Some of my first mods from stock would be 40.3.1 gears, beadlock wheels(brass front only), Treal rear axle weights with meus +4mm axle.

[@definitelynotaweeb1111]

If you think there’s not a lot of content on these you’re gravely mistaken 😂

[@chrishorrobin3073]

Hi iv just put the injora alloy gearbox with 48turn motor in mine.when I steer it to the left with hardly any throttle the front left wheel goes straight up in to the air it will not stay on all 4 wheels any idea thanks

[@ToppersRC]

@@chrishorrobin3073 if it didn’t do it before & the only thing you changed to make it happen was the gearbox / motor. I don’t know then. Is this on flat ground driving & turning or while climbing?

[@everettstormy]

Your axle is binding, you should grease everything or bearing swap it

[@user-pn5gy8ku5k]

i have done this to my trx4m high trail but now the front tires rub on the shocks when i turn, do you know how to fix this?

[@ToppersRC]

Spacing wheels out will help, either wider axles or offset wheels.

[@OGRadRC]

Nice👍🏾💯🔥

[@justjilly2150]

What drill bit did you use? Looks awesome. Got the same truck!

[@ToppersRC]

@@justjilly2150 pretty sure I used a 5/64 drill bit. It was the same diameter as the bolt. I can double check when I get home. I love this truck! As I figured out my driving style I have actually made mine more of a lcg/ belly dragger & don’t use this front mounting setup anymore.

[@schroeder288]

Has anyone done this with the 2speed transmission. It appears there isn't enough clearance from my observation.

[@ToppersRC]

@@schroeder288 I do not have the answer to that.

[@NorthSeaRC-ff9yn]

Thank you for the hints. I will give a try with F150

[@ToppersRC]

Let me know how you like it.

[@alanekmen8660]

Done exactly what you did but my front tires are rubbing the shocks when I'm fully turned. Do you have the same problem?

[@ToppersRC]

@@alanekmen8660 mine was close but didn’t hit. I spaced my wheels out +2mm at the time to get the front tires to not hit the steering knuckles. That maybe why mine did not hit, I didn’t think about that.

[@alanekmen8660]

@@ToppersRC Orderd 10mm hexes. Hope that will solve the problem.

[@ToppersRC]

@@alanekmen8660 that should definitely do it. Do you still have the stock axle length?

[@JavierMartinez-dk8wo]

That’s a really nice k10. What type of wheel are those.

[@ToppersRC]

Thank you! They are the black Traxxas beadlocks. Brass rings in the front & the SS bolt kit.

[@carloshnunez]

Very good mod 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

[@ToppersRC]

Thank you!

[@jdsrcs8061]

Very mods!!! Subbed!!!🤘🤘🤘

[@ToppersRC]

🤘thank you!

[@Sparroh]

Subbed, good video

[@ToppersRC]

Thank you! Hopefully it helped.

[@MysticRiverRC]

Coll mod. I may attempt this on my Defender. Thanks!

[@ToppersRC]

Let me know how you like it.

[@HOUSECAT47]

The defender doesn’t have the same frame but you can still flip the mounts backwards and get some angle on the front and rear

[@ToppersRC]

@@HOUSECAT47 Thank you for adding on, I didn't know the front of the frame is different on the Defender/ Bronco.

[@HOUSECAT47]

@@ToppersRC yeah idk if it makes much of a difference flipping the shock towers but i did it and I can see a slight improvement but nothing like the c10 frame would show after flipping the shock towers

[@gavinhenryproductions3389]

What brand are the wheels on the f150

[@ToppersRC]

They are the Traxxas Beadlocks

[@jeremyreid6323]

Shock blades injora like $15 if i remember right way more flex amazon

[@RCTeamAustria]

thanks for sharing!

[@ToppersRC]

Anytime!

[@kayden_2049]

What tires are on the f150?

[@ToppersRC]

They are the Traxxas Mud Terrain.

[@Mike.rcbuggy]

👌👌👌

[@sualycrispinoficial3677]

Ima need a little more explanation for my bronco

[@ToppersRC]

@@sualycrispinoficial3677 I just learned the Bronco & Defender frames are different. I originally thought they were the same. I still haven’t seen one in person so unfortunately I don’t have an answer right now. I’ll try to figure it out and let you know

[@nunyadambidness1444]

✌🏻👍🏻👍🏻

[@HannahTopper]

🛻💨🙌🏼

[@ToppersRC]

📚 🩶