MEUS Racing RC LCG Chassis Kit REVIEW Is It WORTH It?

[@The_RC_Family]

MEUS LCG Chassis Carbon Fibre Kit for Axial Capra SCX10 SCX10 ii review. MEUS Racing sent me this carbon fibre chassis kit to review and give feedback. It looked nice, and I was intrigued to see how the 21% overdrive and forward motor mount would work, so I was looking forward to giving it an honest and open once-over. How did it turn out? MEUS Racing LCG Chassis kit - www.meusracing.com/en-gb/products/scx10-ii-lcg-carbon-fiber-chassis-frame-kit?_pos=1&_sid=806e2982e&_ss=r Installation manual (included with the kit) cdn.shopify.com/s/files/1/0592/3215/7833/files/SCX10-LCG-Installation-Instructions_1.jpg?v=1723530808 MEUS Axles - www.meusracing.com/en-gb/products/plastic-nylon-brass-portal-front-and-rear-axles-for-axial-scx10-scx10-ii

[@Team_ReVolt]

This looks like a premium chassis kit! Great opening scene of this video 🤩 I'm glad the ReVolt inserts could help to make the pull😁💪

[@The_RC_Family]

Thank you Erwin, the Revolts did really well!

[@adamjorgenson6265]

Wow, amazing video! High quality and informative. Thank you!!

[@The_RC_Family]

Thank you very much for the feedback Adam. I appreciate you taking the time to leave a comment after watching the video.

[@jaideeppatel1896]

I've liked and subscribed! P.S. What a lovely family you have.

[@The_RC_Family]

You are so kind, thank you so much.

[@LumpkinMumfins1]

Great driving on the “Impossible climb,” and Spidey’s looking awesome in his 2.0 guise! Well done!

[@The_RC_Family]

Thank you Lumpkin, I just hope I can do the rest of the build and detailing to finish Spidey's aesthetics off (my least favourite part) I've just ordered mirrors and the other scale details ;)

[@jamiejck]

Great vid mate. Meus are moving things forward in the hobby. Spidey 2 is looking 🔥 👌 Can't wait to see more driving vids to see what this chassis can handle.😊

[@The_RC_Family]

Thank you Jamie. MEUS does seem to be another new force for good in this hobby. I am really looking forward to seeing Spidey finished and running lines somewhere cool. Thanks for watching/commenting mate

[@The_RC_Family]

Timestamps for those who would rather skip to the bits they need to see. Beautiful Studio shots - 00:00 Builders Review - 00:46 First Crawl Test - 15:05 Spidey 2.0 vs The "Impossible" Line Final Thoughts - 22:09

[@suvsteve]

Great video mate stunning effects 😊 Love the review to .

[@The_RC_Family]

@@suvsteve Bless you Steve, thank you

[@pandacrawler6x6]

Amazing Build and a Cool Review! Lots of usefull info ❤

[@The_RC_Family]

Thank you Antonio, it is such a cool chassis kit to build with. MEUS nail it with this one.

[@pandacrawler6x6]

Oh yha Indeed my Friend

[@ivor69uk]

I must say...great video 👍

[@The_RC_Family]

Thank you Ivor, much appreciated bud.

[@Proscalecrawler]

Awesome video. $139 for this kit is not bad

[@The_RC_Family]

That's what I am thinking. You get a lot for the money.

[@Fortes_RC_Adv]

Very nice chassi 💪😁❤️‍🔥

[@The_RC_Family]

I think so too =)

[@dylanbaker5242]

Excellent looking rig! I’ve almost got everything to throw together my build. All I’m missing is my links. Any recommendations?

[@The_RC_Family]

Mine are all custom now, but I think I started off with a set of INJORA high clearance links. These ones worked for me s.click.aliexpress.com/e/_EyLvizJ

[@Bonitacreekrcs]

I want to use the high clearance injora links,What lengths do you think I should get.i will probably use meus nylon portals but I might use the $109.95 flavor Amazon Capra aluminum axles

[@The_RC_Family]

I used the INJORA high clearance kit, and you can make that work, but I will be revising the links so my advice will change soon. As for dropping this on Capra Axles, I couldn't say. They might need different lengths, I mean they will. Let me know if you need a link to the links I am using. 😉

[@PleasureAfterWorkRcCrawlers]

Awesome intro !

[@The_RC_Family]

Thank you, I'm glad you liked it, it was hours of work for a few seconds :)

[@beng.6417]

very informative video. Thank you. Just curious about the upper front link. Have you experimented with mounting it on the outside like Joe did? Curious to see the performance difference between the two. Also, why did you go with the Injora links vs Meus. Cost difference or is there a geometry difference? thanks in advance

[@The_RC_Family]

Hi Beng, I just shot some more video with it recently with all the geometry a little better sorted, the video is up on the channel. This thing is really starting to be very capable for what it is. I hate links outside the chassis rails, but I will do it when/if I need to. As for the links it's just a case of I had them here so I used them.

[@The_RC_Family]

Thanks for stopping by and commenting mate, I appreciate you

[@The_RC_Family]

kzbin.info/www/bejne/mIuYfGCFer2dndE

[@beng.6417]

@@The_RC_Family Oh gotcha. Thanks. Will keep watching.

[@V8chump]

You should really try dual stage foams instead of printed inserts for these hard lines. It might help. The problem with printed foams is they cause bounce and instability, where you see the car move forward, then slip, then move forward, then slip. Because the insert is never perfectly even, it causes them to act like a spring. They load up, then they release and slip, load up, slip. Check 2FMRCs video. Could be something to test! 😁

[@The_RC_Family]

Thank you for the advice V8, I did see Matts video ;)

[@RooiBaardRC]

Well done :)

[@The_RC_Family]

Thank you Rohann 😊

[@chrism5768]

Good stuff. What chassis would you recommend for a full class 3 build with Capra axles. I’d like something with an angled and forward mounted skid?

[@The_RC_Family]

Hey Chris, I would not be the best person to ask as I am relatively new to the crawler scene and do not do comping. That said I am building a class three (ish) rig soon on the ReVolt Chassis. That might be a cool rig to build with. WHAT PART OF THE WORLD ARE YOU IN?

[@chrism5768]

@The_RC_Family USA, NE TN. Sweet, I look forward to your video in the future.

[@Bonitacreekrcs]

I am really considering getting this chassis. but I am also thinking about getting the new arrma fury

[@The_RC_Family]

BOTH! LOL I guess you have to get the one that sparks Joy, as Mr C would say you gotta Marie Kondo that sh#t :)

[@Bonitacreekrcs]

@@The_RC_Family I know, the thing is I don’t have a 1/10 scale short course truck and I do have a 1/10 scale crawler but it’s a redcat ascent😢

[@The_RC_Family]

@@Bonitacreekrcs Oh dear... 😬

[@themountain59]

@@The_RC_Family LOL

[@areadierc2803]

So glad meus came out with a chassis. What wheelbase are you running?

[@The_RC_Family]

Me too Area, I will go measure it. Currently 325mm but I will be reducing the wheelbase. Maybe ending up at 313mm (ish)

[@D.TH.87]

does the 1800 kv from hobbywing fit in there?

[@The_RC_Family]

Hiya, yes it does!

[@bassrutzjoe]

i just bought and built mine. out of curiosity what length drive shafts did you use on your build

[@The_RC_Family]

99mm and a 104mm I think. I'll check now.

[@RCTeamAustria]

thanks for sharing

[@The_RC_Family]

Thank you for commenting :)

[@eelojknj]

So I got my chassis last week. Mine is a 13" wheel base on 1.9 with jconcepts tusk with a outrunner section traxxas 2660 and it runs great. Mine is closer to class 2/3. Great vid just a to dark. Cant really see your rig

[@The_RC_Family]

Oh, I am sorry it was too dark for you. Your build sounds really cool. I would love to see it!

[@RC-Alexbseg]

Super vidéo, le miens est encore en cours de livraison 😢

[@The_RC_Family]

Oh, you have ordered one? Hopefully it should be there soon, you'll love it! 😍🙃 Thank you Alex

[@RC-Alexbseg]

@@The_RC_Family oui, avec les axes capra meus 😉

[@The_RC_Family]

@@RC-Alexbseg Ooh! Very nice!

[@eelojknj]

Sorry and it is on capra axles

[@The_RC_Family]

Ah well, I don't have a problem with anyone running Capra axles I just used what I had already sorted out for this build. I might do a 6x6 build at some point. That would be fun to build off this chassis with Capra Axles 😉