MFS2020 on 3 projectors using Fly Elise

MFS2020 on 3 projectors using Fly Elise

[@dorothysessanga1297]

Yaaaay the aeroplane is here..welldone.this is a crazy creation

[@anthonymark3771]

Thanks for the video. Would be great to see this at a gate just to confirm there is no fisheye effect. But l guess with MSFS currently hoping to release multi screen support by the end of the year, fisheye effects won’t be much of an issue. Let’s just hope the issues with ProSim737 and MSFS can all be resolved. I have stuck with Prosim/P3D at the moment as it’s running perfectly whereas Prosim/MSFS still has too many unresolved and frustrating issues for me.

[@alpasimulation5485]

Thanks for the comment and great idea. Right now I have removed my projectors and re-position them better to improve the quality of video. I will then make some videos at the gates and will report back

[@kickoff3312]

Hello Anthony Well, MSFS2020 could - according to some people who are following its development progress - bring the multi-view already with the July update - latest September. Fingers-crossed !

[@elmalloc]

Love it!!!

[@playmixx]

how do you get the views that show the scenery only?? without the virtual cockpit or panels. please help

[@alpasimulation5485]

Prosim gives you the 737 flight model without the cockpit, made purposely for the homemade cockpit

[@playmixx]

@@alpasimulation5485 ah that's wonderful! do you have any recommendations for C172? thank you so much!!

[@maurobusnelli]

ok grazie per la risposta , solo per info, che tipo di scheda video hai?

[@alpasimulation5485]

Ho due schede Geforce RTX2080 Ti 11GB. Una dove ho connesso il monitor del pc, l'altra dove ho connesso i 3 proiettori

[@jonyfrommars]

Hi. I have same setup as you. Latest flyelise for Msfs works perfectly. However im getting washed colours and basically all white ground textures above 30000 ft. I enabled HDR in win 11 for all 3 projectors but when game loads only 2 are on HDR. Have you managed to get decent HDR on all projectors without reduced brightness? Thanks

[@alpasimulation5485]

I have all my hdr off, and changed the setting in Nvidia control panel to make the ground colours more vibrant.

[@jonyfrommars]

Hi. Thanks for reply. My digital vibrancy is at 75% already. I can try 100%. Have you tried HDR?

[@alpasimulation5485]

@@jonyfrommars No, when I select HDR ON my projectors act weird and unstable, plus everything becomes too bright

[@jonyfrommars]

Ok thanks. I have it off also. Enjoy your Simulator!

[@MotivateDigitalUAE]

Hey ! Any further progress on this? Are you still using it? Anything new to try to map 3 projectors?

[@alpasimulation5485]

The progress is that I have re-positioned the projectors for better visual and mapped them again. I need to try with the fs2020 multi-display support but did not have chance yet, I have been working in updating my simulator with new and improved stuff and working on the various videos that I am planning to release soon

[@LucaTe-ig8zr]

hello, have you tried the new fly elise implementation for mfs2020, hope to see your video tutorial soon, because it seems a bit complicated to configure

[@alpasimulation5485]

Hello, yes and it works well. I am working on the video as we speak, i think it will be released after 2 other videos

[@kickoff3312]

As you tested P3D (with active sky ?) and MS2020 with 3 projectors, do you still recommend to go MS2020 in terms of graphics quality etc ? Even with the 'view stretching' in MS2020 ?

[@alpasimulation5485]

Hello, i did not test it with active sky. I don't have or see any stretching, as O mentioned in my video I think the stretching situation is for those using monitors instead of projectors, from my side I honestly don't see any glitches or stretching and in fact I will not go back to P3D.

[@kickoff3312]

@@alpasimulation5485 Thanks for replying. Last questions: How do you manage to have the 3 projectors and 3 monitors (inside the cockpit) ? You connected all of these by prosim ? One PC or two ? Do you mention somewhere your config ?

[@kickoff3312]

@@alpasimulation5485 PS/ I see some streching on your video. For example, when you show the lateral view from your cockpit, you can see that your trees are a bit flat.

[@alpasimulation5485]

@@kickoff3312 i will double check, however my projectors setting is not optimal and in fact i removed them, currently re-positioning them

[@alpasimulation5485]

@@kickoff3312 the projectors have nothing to do with Prosim. The monitors inside the MIP are controlled by two mini pc inside the MIP. Check out my video on the MIP explanation

[@diogosantos3188]

Ciao Ragazzi! first many thanks for the tutorials!! you helped a lot! i have a question, in the video that you do the calibration of the fly elise you said that to enable the surround only for the calibration and then not to be enable (min 28:30). but in this it is enable (min 4:59) . its to be enable or not? kind regards, Diogo

[@alpasimulation5485]

Hi Diogo, sorry for the confusion. During the normal calibration, the surround must be on when you are actually doing the calibration..when everything is done and working fine, you need to switch off the surround. In the video that you saw above, the nvidia surround is always on because we are not using the multi display support. This video in fact was created as an alternative "cheat" to have the fs2020 on the 3 screens projectors because the multi display was not yet supported at the time of the video. I suggest you to watch directly the latest video on the fs2020 multi display support and calibration with fly elise

[@diogosantos3188]

@@alpasimulation5485 I will take a look to last one. but to be honnest the result in this one is prety good. it looks much more realistic. in the ones with the multi calibration the aircraft looks to be much more above of the runway. and I always need to adjust it to bellow. and also it disables the zoom, even after change the prosim cameras file it always dont permit the zoom inside the simulator. did you have a workaround to it? I have 2 more questions to you ;) how you do the surround? After I do it, I always need to extend the monitors to have the "desktot" monitor working, because it auto turn it off after the surround. ANother question is, do you notice any fps drop after a while flying? i have the same graphic as you, a dedicate ssd to the MSSF, 68Gb of ram and after a while when landing and take of I get FPS of 6 to 10 :/

[@diogosantos3188]

@@alpasimulation5485 really thanks for the reply :)

[@alpasimulation5485]

@@diogosantos3188 Hello, sorry for the delay. For some reason some of the questions do no appear on my KZbin channel on my mobile, only when i login on my laptop I see them. Answer to question 1: the zoom issue was fixed with the latest immersive display pro. In immersive display pro, you can set the zoom you need and when you start the simulator it will automatically adjust to the zoom you set. Answer to question 2: When you move the simulator directly to the 3 projectors in surround mode, then yes the desktop will not show your simulator because essentially you moved the surround from a monitor to another. If you want to see in both, set the pc monitor and the surround in Duplicate mode and not extended mode, but not sure if it works or not. I do not use the surround mode anymore, that was just a simple "cheat" i was using while waiting for FS2020 to give us the multi display support. I suggest you to abandon the surround mode and do it correctly as per my last video on the calibration. Answer to question 3: I did not notice a FPS drop, but I haven't fly much and usually my flights are less than 2 hr long. I read somewhere that if you disable the rolling cache the problem can be fixed. Try and let me know

[@maurobusnelli]

ciao scusami ti volevo chiedere un consiglio, a casa ho 3 schede una 1080 una 3090 e 4090, ho provato a fare la calibrazione ma subito dopo essere passato alla modalità surround nvidia, il computer va in crash, questo solo con la 3090 e la 4090, metre la 1080 non dà nessun problema , ho provato anche a cambiare 2 computer ma nulla da fare il problema rimane. per calibrare è obbligatorio mettere le schede in surround? nel caso hai un suggerimento da darmi? grazie mille

[@alpasimulation5485]

Ciao, secondo il manuale di Fly Elise per la calibrazione serve mettere Nvidia in surround mode, dopo la calibrazione puoi togliere il tutto. Sinceramente se non metti in Surround non so se ci sia un'altro modo, il surround serve perche' durante la calibrazione il software.deve vedere i display come unico display e non tre differenti. Quello pero' che posso dirti e' che quando a me il sistema andava in crash, era perche'o le risoluzioni non erano uguali (ad esempio, 2 display con una risoluzione e un'altro con una risoluzione piu' alta) oppure perche' le frequenze erano troppo alte (ad esempio, oltre i 60 hz per ogni display). In pratica, controlla che le risoluzioni e le frequenze siano giuste e uguali

[@maurobusnelli]

ciao è uscito la versione di Flyelise per mfs2020, volevo sapere quando pensi di fare un video tutorial grazie

[@alpasimulation5485]

Ciao, il video e' stato fatto ma deve passare in editing. Penso entro max una settimana e dovrebbe uscire

[@LucaTe-ig8zr]

@@alpasimulation5485 grazie mille sarà in inglese o italiano ?

[@alpasimulation5485]

@@LucaTe-ig8zr In Inglese. Vorrei tanto farli in Italiano ma attirerei soltanto il pubblico Italiano

[@juanantonioperello4339]

Please make new tutorial for the new experimental update flyelise with msfs

[@alpasimulation5485]

Hello, yes the new tutorial is on my list of things to do, hopefully very soon

[@alpasimulation5485]

New video came out, hopefully it will be helpful

[@sundar999]

This just looks like the view forward is stretched around to the sidas, not realistic. When you look out the side windows you should see what really is to the left and to the right, like your wing tips, at least for a plane with no wing sweep, or be able to see fully the plane parked next to you.

[@alpasimulation5485]

Yes, it is stretched..This video was to show how you can move mfs2020 on the 3 projectors.. Please check my latest video, it is mfs2020 but this time warped using fly elyse..No more stretching

[@sundar999]

@@alpasimulation5485 That sounds great, I'll check 🙂