MG Kyrios Custom Paint Fortune Meow's Studio Resin Conversion

Hey guys! Finally, the Kyrios are done! It took me quite a while to finish it! I really underestimated the effort to do a resin kit, and wow, it is a lot of work!
Hopefully, you guys will learn something from this video. Don't forget to like this video and subscribe to my channel!
Paint used :
Finisher's Carbon Black Mat
Dspiae Black
Dspiae White
Anchoret 017 Cold Black
Anchoret 016 Weapon Grey
Anchoret 015 Cold Grey Light
Anchoret 004 Warm Grey
Anchoret 024
Anchoret 001 Ferrari Red
GUNPRIMER GLAZER (available 15 March 2022)
www.gunprimer....
Coupon Code - EAGUNPLA10
#gunprimer
Background music: www.epidemicso...
EA Gunpla Instagram: / ea.gunpla

[@wretchedsoul2197]

No mater how much i attempt to dust and keep my parts clean, I can never get such a flawless paint aplication as you do on every single part. It's incredible.

[@EAGunpla]

Thanks man! It’s best to dust off any particles before start painting to prevent it from happen. Your environment also plays an important role too ☺️

[@gamerkingdom1442]

Ohhh, phenomenal! These resin mod kits are legit incredible! And your coloring is PERFECT!!

[@EAGunpla]

Thank you so much!

[@gamerkingdom1442]

@@EAGunpla I’m legitimately considering buying a 3D printer to make unique custom GunPla!

[@ZealousHangar]

I have been waiting for this. Thank you Ezzat.

[@EAGunpla]

Thank you Logan!!

[@ivansoh3318]

Very awesome build and custom 👍👍

[@YvesSaintSavant]

I wanna buy this so bad just to gaze at it everyday. Your painting skills are phenomenal

[@AI.art.Tiz001]

Good evening Mr EA , I've come to watch your Gunpla production video and thanks to your wonderful video, I'm enjoying making Gunpla now. Thank you very much. Greetings from Japan.

[@EAGunpla]

Hi Takasi! Thank you so much for your words!! I really appreciate it! 🙇🏻‍♂️🙇🏻‍♂️ I hope I can continue to inspire you ☺️

[@Yuu92296]

Doood I love Kyrios, it's tied with Aegis for me. Props!

[@denigrisdaniele]

I prefer your works with the "easy" HG! however, you are always a source of inspiration

[@EAGunpla]

Hey man! Yeah i know a lot of my subscribers want to see me do HG. I will soon! Probably after May, i will go back doing what I used to before 😁 thanks for your feedback!

[@edwardcrosby7050]

the best. i took a break from gunpla glad i came back missed your vids

[@imbuckandimheretofuck8908]

I love when you use low-fi type of beats for these videos. I could watch em for hours

[@ThePASBERUK]

Lain macam . POWER !!!!

[@syafiqshariff9245]

Never dissapointment with your build man ! 👍🏻

[@EAGunpla]

Thank you Syafiq!!

[@samuellee7990]

Great Job! Better than I'll ever be able build.

[@EAGunpla]

Thank you Samuel! I’m sure you can do it too! Keep practicing! 😁

[@jegxxx]

So this is what perfection looks like.

[@yawarakai3003]

Damn, sooo clean, and the music is so chill too, midnight headphone friendly hahah

[@shaggot8512]

Wow. This is phenomenal I have never seen this much love for the mg kyrios

[@LEWIIS23]

Absolutely stunning as always! ✨

[@EAGunpla]

Thanks Lewis!

[@jasoncombs3232]

You need to use Mr. PRIMER surfacer for the primer. It's made specifically for resin and metal. Regular Mr surfacer 1500 is not a proper primer. It's a surfacer used to fix surface imperfections.

[@EAGunpla]

Hey man thank you so much for the tips!! I’ll make sure to do it properly next time ☺️

[@jasoncombs3232]

@@EAGunpla no problem brother! You did a excellent job and I hope you do more resin kits!

[@staceythoo]

Selamat berpuasa, I was the one who took pic with you during your new launch of painting😆

[@EAGunpla]

Hey its you! Haha! Thank you for your support!! 🙇🏻‍♂️🙇🏻‍♂️

[@jebstuart1323]

Try cleaning up your gates before washing off the release agent, it works alot better.

[@brokemanstudio6964]

woooow this is my first time watching you do resin. well done!

[@EAGunpla]

Thanks man! And this is my first time doing full resin kit! A totally new and challenging experience!

[@foxlance]

One of your best work yet, I just wish I can paint like this in the future. All the best to your channel!

[@georgeotraw6537]

Beautiful chic super fighting machine we are all happy, right to tears

[@andymusa459]

Aku duk sibuk follow posting dalam insta xsabar nak tgk bila nak tgk plak tarik tu ade keje byt anways love it so much 💖 💕 ❤️ thank bro for keep on entertaining us

[@EAGunpla]

Thank you so much Andy!! 🙇🏻‍♂️

[@jmhutchinson5721]

Beutifull work. Nice job👍👍

[@EAGunpla]

Thanks bro!

[@ph0bolus]

amazing, i'd love to see a bit of the masking process.

[@EAGunpla]

I did record the masking process, but decided to not included it, it will make the video much longer. Probably more than 30 mins

[@daarrkness6743]

Watching this makes me realize I am no where near ready for a resin kit lol

[@yashmith.m672]

This is so cool I loved this project I was waiting for this 😃

[@TheMozerfok]

Absolutely gorgeous!!!!!

[@EAGunpla]

Thank you Benoit!!! 🙇🏻‍♂️🙇🏻‍♂️

[@kiraho6889]

Thanks for sharing the new product. You’ve done a great job again. But hope for making a new gunpla in a bright and sharp color next time. You had been doing dark and dim color for some updates. See you soon.

[@EAGunpla]

Thanks Kira for your feedback! I really appreciate it. Since this is a commission from Gunprimer, they wanted a dark colour scheme for it. I will do bright and sharp colour for my next project!

[@kiraho6889]

@@EAGunpla thanks buddy👍🏼

[@fallen-qn1fr]

mmmm... the colors look hella rad

[@keeleycarrigan]

I guess he needs a really long sword because those knee wings are so big 😂

[@giannidelbianco3526]

Looks great !

[@EAGunpla]

Thanks Gianni!!

[@l.9.9.l]

He's amazing !!

[@enriqueaguilar4706]

Awesome work !!!!

[@EAGunpla]

Thanks Enrique!!

[@noblord8643]

i think, using extra expensive sanding are not necessary. since its resin, just use general market file will do.

[@isvaraov]

Beautiful

[@plamoverse]

Ea! First seat in the house today!

[@somerandompeepsect40]

Hey EA Gunpla! I have a few questions I want to ask about your spray booth. 1. Where do you think I get one of those water curtain spray booths? 2. Compared to a regular spray booth, which one is more expensive to operate? 3. Do water curtain spray booths need a continuous supply of water or do they use the same water over and over? 4. How much space does this take up? Are you able to pack it for storage?

[@ramza813]

Just go with the basic cheap spray booth with the LED lights they are compact and awesome for 120 bucks. the water curtain ones are over 400 if you can find them and they're huge.

[@fennix212]

Amazing looking gundam

[@Eaglesman3620]

I’ve been getting into models lately and want to try custom painting a few. Is there a brand for airbrush spray you recommend?

[@starocean01]

Hi EA Gunpla great build! Just wondering if dust gets stuck when applying clear coat, how do you remove it?

[@luanp2317]

Use enamel thinner and slowly clear the dust, then applying coat again Sorry for my english

[@nlbb373]

Re-do

[@Metaretru]

You can use soft sandpaper with high grit to rub it slowly and redo it

[@jonathanmana-ay541]

Wow :)

[@SNONYM]

Love your work. I noticed you didn’t apply a finish in between painting and panel lining. About how long do you let the paint cure in between these steps.

[@paolowilson00091]

I let my paint cure over night . Then I topcoat then let that sit than panel line.

[@norfatimah3371]

Good job

[@PaanDesu]

yeaa...another inspiration

[@techlution]

so cool !!!

[@abdulmajied4941]

Kemas teruk!!! 👍🏻👍🏻

[@steelfalconx2000]

Daaaaaaamn

[@gundamenjoyer217]

Sick build, but where can I get one of those absolutely epic waterfall painting stations? If that’s what it is, anyway.

[@thebox505]

I don’t think the regular surfacer 1500 adheres well to resin, and you’d need stuff like primer surfacer for it to adhere well onto resin well enough, no?

[@EAGunpla]

You are right! I just learnt about it! 😅😅😅

[@ramza813]

I used 1500 black over Chinese knock off resin kit and no issues at all. Primer will stick to resin just fine

[@thebox505]

@@ramza813Use regular tape and paste it over the part and ripping it out to test its adhesiveness, and no resin kits are resin kits, there are no chinese knock offs for resin

[@Zoivod]

Can i ask you guys a question ? Is it pretty much standard that gunpla builders use lacquer pains as opposed to acrylics or anything else ? And why is that ? I always assumed laquer had to be applied heavier for consistent coat and would interfere with regards to snap fittings and moving parts

[@thawsitt]

In my experience, Lacquer paints are easier to spray, has better finish, dries faster and much more durable. That being said, lacquer thinners are harmful to your health so you need to wear a respirator and need good airflow when painting.

[@Tgho12]

You need to do Fortune Meow Dynames

[@ssrbxtmt730]

I'm a newbie learning model making recently and stumbled across your channel. I am very surprised by your technology, from this channel I have seen a lot of technology that I have not been exposed to, I really appreciate the videos you made, I learned a lot. Can you tell me the title of the music you used in this video? This video you made is really great.

[@aidielazraaiasri1543]

you can read in the description there are link to the sound used

[@Foiod]

Very cool

[@EAGunpla]

Thank you Adam!

[@joshuawiseman5629]

are there instructions on these conversion kits how do you know what you have to drill and cut to make fit?

[@jamiljj7248]

new to air bushing so this might be a dumb question do u have to thin ur top coat

[@kuyayobs]

I need to get one of that Glazer thing, btw what camera are you using for your Build Vlog?

[@nipponokai]

Can you share the uv glue for repair? It looks useful on work process.

[@alexjobin623]

Color scheme is out of this workd

[@yusafizolyusoff2725]

Lawa gila😭

[@kmoov90]

Wait, you didn't sand them before applying primer?

[@chocofalcon]

Nice build as always. Does the new product have any scent?

[@EAGunpla]

Thanks bro! No, not really!! It doesn’t smell 😁

[@KSUBlueDragon]

Where do you find these awesome custom kits for gunpla that looks freaking beautiful!

[@xbondpowerblood8442]

China

[@marc-antoinetimotei2352]

amazine video ! Resin is so detailling ! it's a new water wall ? What is the model ?

[@EAGunpla]

Thank you bro! My friend helped me get the water curtain spraybooth from Taobao ☺️

[@waywee8359]

I have a serious question and not something to offend anyone but why not use the regular kit? It seems like it's a lot more work to use that

[@daarrkness6743]

how do you not mess up the paint when you panel

[@nazvelo]

hensem mcm tuan dia

[@maveriq.gunpla]

Melekat plak ye surfacer tu. Pakai Modo punye senang je tanggal. Last pakai Hobby Mio punye GK Surfacer..

[@EAGunpla]

Melekat, tapi ada jugak certain parts yg celah2, yg mana tak cuci betul, mmg tertanggal bila cabut masking tape 😂😂

[@maveriq.gunpla]

@@EAGunpla Bleh buat jadi blooper tu dlm video.. Haha..

[@reizoarian4445]

The error occurs on time frame minute 10 to 11 from what? and how to avoid them?

[@egasurya_]

Woww

[@fennix212]

Resin cure you used Where can I buy it

[@miguelsanz5752]

What the small blade hobby knife from? I’ve been trying to find one that’s not the long xacto blade

[@morganmememachine466]

36USD for 5-10% more contrast seems like a lot

[@DwarSel]

Great, another kit I get to convince my wife to let me buy 🤣

[@EAGunpla]

Get it bro! Really great conversion!

[@markdbest3244]

Thats a nice build. Is the materials brittle?

[@EAGunpla]

I think it is tougher than UV resin 😁

[@hasifzahin]

Salam bro, kenapa ada material putih tu? apa fungsi dia? minit ke 5:53

[@awgkuariz8331]

what the diff...resin and the normal kit?

[@IamXapnc]

❤️❤️❤️

[@sushibakar]

Can I ask how you apply cover for the line?

[@khairulanwar4804]

Bang mana dapat part tu? Saya nk beli untuk dynames gundam

[@jasonleong3937]

Can u make a hg 00 command qant the music u have are cool

[@fennix212]

Would you try other gundam resin kits

[@DR.LOSSUS]

What do you use for the panel lines?

[@jasonleong3937]

omgggg sangat heebatttttttttttttt boleh buat gundam age grey colour?

[@user-wo3xw1je5g]

а будет вирт и динамес?

[@Alexanderhogi]

Hi there, what font did you use in this vid? 😄

[@fennix212]

What UV resin did you use for this kit

[@noahtjyt]

where did u buy this kit from?

[@gerrykomalaysia2]

Good vid. How much is conversion parts? Regards from Malaysian utuber

[@EAGunpla]

Thank you! I bought it from Museigen Hobby, based in Malaysia. They sell it around rm500++. I pun terlupa dah exact amount haha

[@danialjafri5602]

Gunprimer glazer tu utk warna selain hitam pon boleh kan bang?😅

[@EAGunpla]

Warna lain pun boleh bro hehe

[@ikhwanmubarak2029]

Bang macam mana nak buang waterdecals from gundam?

[@EAGunpla]

Dah topcoat ke belum? Kalau tak topcoat, boleh kopek slow2. Tapi kalau dah topcoat mcm susah dah unless kene sand balik bahagian tu

[@jasoncombs3232]

What did you use to clean the mould release from the resin?

[@EAGunpla]

I just used typical dish soap 😂😂 i think it is enough to remove the release agent, maybe? Haha! I need to do more resins to experiment!

[@jasoncombs3232]

@@EAGunpla I've tried purple power, but didn't have any luck. The paint still peeled off with the masking tape. Since then, I've been using Gaianotes resin wash and haven't had any problems, but its very expensive for a small amount.

[@lawrencemason6645]

@@jasoncombs3232 denture cleaner and dish soap and let it sit for 24 hours, then rinse with water. that will get it all off for sure I usually just do a few drops of dish soap in an ultrasonic cleaner and that works fine for me too

[@jermainemoore3625]

Do you sell any of these??

[@azifkappa4551]

Can share the link website resin kit

[@blukara7]

What spray booth is thaaaaat?

[@EAGunpla]

Its a water curtain spraybooth! 😁

[@hidotaniguchi9506]

transform????

[@MrJeyhan]

Hello

[@user-zc8zu7qm8z]

이런 작품들 따로 판매하시나요?

[@YouKnowThatsRightSS]

The glazer has to be the most pointless tool ive ever seen

[@EAGunpla]

It is an optional step for your build, and i’m totally understand from your point of view 😁