Heater core replacement on 1974 MGB. This may not be a great how to video, but is is a great how NOT to video. We show symptoms of a bad heater core and how to fix it. Hope you like it.
Пікірлер: 13
@stephenhampton35475 ай бұрын
On an MGB, pulling the heater box and replacing the bottom seal on the windshield are almost worst than pulling the engine. Thanks for posting the video!👍
@Robertsbritishcars5 ай бұрын
NO kidding. I replaced the rubber seal on my '74 and messed it up at the end. I couldn't bring myself to pull the windshield and start over. Needless to say, I have a slight leak. Maybe I'll make a video of fixing it. The good news is, the heater works great. Check out the heater box video in "64 MGB restoration, Love 1.0" Cheers, Bob
@prutz90920027 ай бұрын
Love these videos and your humorous approach that really fits with the nature of these cars. Keep making more - I love it!
@Robertsbritishcars7 ай бұрын
Thanks for your comment. I am very happy when someone likes what I do. I am also happy you enjoy the humorous side. The next video will be about the Spitfire, followed by a walk around on the MGTF and the story of how I ended up with a 1964 MGB. Thank you and ask your friends to subscribe. Cheers!
@MGB-learning7 ай бұрын
Great video and presentation.
@Robertsbritishcars7 ай бұрын
Love your reply!! Thank you for watching. Now that I'm retired, whenever I do a project on the car I make a video of. Let me know if there is anything you want me to work on. I plan on rebuilding the rear differential in the MGB,. That ought to be a mess, I mean interesting. I hope you subscribed, more videos to come. Cheers.
@Ozcrazy49Ай бұрын
Excellent tutorial, thanks for producing and directing. Hollywood beckons 😀😀😀
@c.brionkidder92325 ай бұрын
Really great video. I'm relieved the green wire trick worked to pull the cable back through the grommet. From the horror stories I've heard, that cable is the worst part of it, and no way I want to monkey with it on the heater core side.
@Robertsbritishcars5 ай бұрын
I did not want to pull the whole unit mostly because it is so hard to get the gaskets and all the plumbing running over it back in place. I spent a lot of time just trying to remove the core, but as I learned (the hard way) it was easier in the long run to pull the unit, put it on the bench and fix it and replace it as a unit. I don't pre produce these videos so viewers can see all the problems that can turn a 2 hour job into a three day ordeal. Thank you so much for the comment. I am currently working on the restoration of a 1964 MGB. Complete tear down. Videos are on the way. Cheers, -Bob
@c.brionkidder92325 ай бұрын
@@Robertsbritishcars 3 days lol. I started putting LEDs in my gauges November first, that turned into replace the gauge bezels, then I got the bright idea to replace the carpet while the console was out, followed by let's reupholster the crumbling seats... I'll be able to drive it tomorrow for the first time since November.
@rscruiser35335 ай бұрын
Some Good Tips ------ Question ----- did the new Heater Core come with the two new rubber grommets you put into the cover that the two necks come through ----- if not do you know the size of them ------ they weren't there when you pulled the core out of the housing ------- Again Thank You for the video ------ Rodney
@Robertsbritishcars5 ай бұрын
I am so thrilled to know someone watches. Thank you. You are right, they were not in the box when I took it apart. I can't remember which car I had, that had them. I ordered them from Moss, here is the link. mossmotors.com/280-190-grommet The grommets help keep the air from seeping out of the heater box. Also, I may suggest to watch part one of the Restoration of the '64 MGB, Love 1.0. I assemble another heater box. I would appreciate your opinion. Hope I was helpful. Cheers, Bob
@MGB-learning7 ай бұрын
Buy a Miata? Go wash your mouth out with carb cleaner spray. LOL!