mgb hub

[@glennseitz2453]

Thank you for posting this. I am restoring a 1971 MGB GT, and your video is just what I needed.

[@daviddouglas7950]

Thanks for the tip about putting gasket seal on the back of the plate. Great video! By4now, Dave on the adirondacks

[@TheThomasdahl]

And the lower inside spring is from the other side of the car. The little dog leg on the spring should hook into the handbrake leaver to stop it rattling...

[@DesAcetek]

Thanks for the info, I'm doing the other side soon so may remake this video

[@timbr33]

great video, and also nice to see such positive comments regarding 'errors' in assembly. a refreshing change from all the normal negative trolling on here! good work everyone

[@deandallmann4464]

Did you use a rubber mallet, or what, to get the hub back on?

[@DesAcetek]

The hub slides on easy when the splines line up. Then the nut pull everything up just right.

[@mikekovacs8981]

Your brake shoes are not on correctly as the part without the lining is pointing downward on both sides. It depends on the direction of rotation on each side but if you imagine the drum turning forward you want it to see the part without the lining first on each of the shoes.

[@DesAcetek]

Gosh, your correct, the rear one should be the lining at the upper most the front one should be lining at the lower most. very well spotted. I will add this to the description.

[@jorgeflores6279]

Look in for instruction... installation rear drum brakes..fr 1972 MG midget👊😏

[@bobvancalcar9090]

Pls remove the video.