MGB Restoration, Striping Engine Compartment prepping for paint, Clip 5

  Рет қаралды 45,063

MGB18001979

MGB18001979

Күн бұрын

Completely disassembling, and striping out of the engine compartment. Steps used to remove grease, and road grime out of the engine compartment, prepping for paint.

Пікірлер: 15
@TheMechanic1967
@TheMechanic1967 11 жыл бұрын
Yeah! As I recall, shop time is 8 hours to replace a clutch on an MGB with overdrive...I think time can be shaved by 4 hours by dropping the front suspension
@MGB-learning
@MGB-learning 12 жыл бұрын
Great Job!
@TheMechanic1967
@TheMechanic1967 11 жыл бұрын
after pulling my engine, I realized that re-installing the engine was much easier to install it through the bottom rather than the top...it is only 4 through bolts to wheel the front suspension plus 1 bolt on rack and pinion!....While the front suspension is out, You can inspect much closer while your playing with engine, clutch or whatever...just a simple shortcut
@MGB18001979
@MGB18001979 11 жыл бұрын
Im glad it worked well for you, but seems to be more work since you dont have to remove anything to pull it out the top, good luck with your project.
@MGB18001979
@MGB18001979 12 жыл бұрын
Thanks, just did another one for a Utub fans in MI need to work on the video and post it
@markscheck
@markscheck 12 жыл бұрын
Awesome video. Are you a mechanic by trade?
@SvntyStang
@SvntyStang 10 жыл бұрын
Do you have any vids on how to change the drivers side engine mount? The steering shaft goes right through the engine mount. So looking to see how to change the mount.
@kastewart1001
@kastewart1001 8 жыл бұрын
+SvntyStang Hi. Saw your comment about changing engine mounts. I just changed both sides and had to pull the steering rack out, yes, split the tie rod ends to remove it completely. Still a very difficult job to start the 9/16 nut.
@addisoncuevas3800
@addisoncuevas3800 10 жыл бұрын
which Rustoleum paint did you use?
@exJacktar
@exJacktar 4 жыл бұрын
Showing what you were doing would have been useful.
@torchyboyz
@torchyboyz 8 жыл бұрын
Hello there, I see that you are striping the engine. This is very strange to me, I don`t know why anyone would stripe an engine. I myself have STRIPPED mgb engines in my youth but this striping is new to me. All the best from England, home of good education.
@mattkilbourne4654
@mattkilbourne4654 3 жыл бұрын
Cmon, Limey. Dont be an asshole.
@MGB18001979
@MGB18001979 12 жыл бұрын
No Im to dumb, I just enjoy playing with them. If you get stuck on somthing give me a call 877 268-5230 I see if I can help. Dont get in a hurry enjoy the fun
@chazmanIII
@chazmanIII 10 жыл бұрын
Do you restore for others?
@MGB-nm7yp
@MGB-nm7yp 10 жыл бұрын
I retired from the Army, and now do on the side
MGB rebuild Episode 8. Will this roadster ever start??? Last chance saloon!
21:20
Flat Caps 'n' Classics
Рет қаралды 4,1 М.
MGB Restoration, Machine Shop work and Engine Rebuild Clip 4
8:14
MGB18001979
Рет қаралды 147 М.
Пришёл к другу на ночёвку 😂
01:00
Cadrol&Fatich
Рет қаралды 7 МЛН
1ОШБ Да Вінчі навчання
00:14
AIRSOFT BALAN
Рет қаралды 6 МЛН
The Joker wanted to stand at the front, but unexpectedly was beaten up by Officer Rabbit
00:12
when you have plan B 😂
00:11
Andrey Grechka
Рет қаралды 53 МЛН
MGB Restoration, Body Work prepping for paint Clip 10
5:19
MGB18001979
Рет қаралды 28 М.
1973 MGB Will It Run? After sitting for 20 years!
16:47
MechanicKid
Рет қаралды 19 М.
The SIMPLE Trick If You Don't Have A Paint Booth!
13:47
Paint Society
Рет қаралды 3,6 МЛН
MGB Restoration, Paint Shop Clip 13
9:26
MGB18001979
Рет қаралды 23 М.
MGB First Start
18:38
Robert's British Cars
Рет қаралды 15 М.
MGB GT,   Part 3 - Engine bay - prep-work
27:13
D3Sshooter
Рет қаралды 11 М.
DIY Valve cover Paint on the MG!
11:02
Broke Boy Custom
Рет қаралды 116
MGB GT Restoration Pt 22 Welding the Sills
9:56
Rebuild the Past
Рет қаралды 24 М.
MGB Compression Check - Easy to do!
5:35
McNamara's Garage
Рет қаралды 2,3 М.
Пришёл к другу на ночёвку 😂
01:00
Cadrol&Fatich
Рет қаралды 7 МЛН