MGP Caliper Cover Install

[@pray4megaming670]

Best detailed video I've seen on installing brake calibers bruh great job camera looks f****** awesome keep up the good work

[@MrJeffreysBAMF]

The drumming in the back-round was hilarious! Your response was EXACTLY how to act when you have neighbors 😂😂

[@casperaudi7476]

You and I have the same truck it’s that easy I have to find those brake cover thanks for the video man😄😄

[@hemi5.7villain]

looking into those 4 my 07 Aspen think I'm going to get some custom with the writing on you have the villain in the back and in the front hemi5.7

[@dayylevi]

Much peace and love brotha can’t get no better then this

[@xraider8848]

Thx bro

[@n_andrews1370]

They look good. I've been going back n forth about getting them because my rotors have some rust on them (small amount but its there) and I dont want them to bring attention to the rust. I really like them.

[@lynnjones9712]

Great Video, Looks good. Going out now to put on my daughter's car.

[@emersonyoung8979]

Nice video and nice truck bro.i just ordered some and was curious to know how to install but you helped a lot,thanks..

[@xraider8848]

No problem bro u won't be disappointed

[@m1ggi3]

Awesome!! Looks like an easy install. Getting these for my Cherokee

[@xraider8848]

Yes its very easy

[@Mistuh100]

So I gather you don’t have any issues with clearance when you put the rim back on? Saw a similar video where the guy mentioned he needed spacers.

[@olugbengaodus7520]

Anyone please Can this caliper cover fit my vauxhall insignia grand sport thanks

[@xraider8848]

The app I used for these is carid. Just put in your vehicle information and it'll show if they have them available for your vehicle

[@olugbengaodus7520]

@@xraider8848 thanks bro I will check it out now peace ✌️

[@vanessapalmer5224]

I'm glad you had no issues with your application. Mine was a nightmare 😫. For those of you who are thinking of installing this product on a Volkswagen Passat model. I wouldn't recommend it. I give this product a - 4 *****.

[@jesusisoursavior2682]

bro is this nit dangerous in the long run im afraid it will remove while driving

[@mrobinson7750]

Did the paper to check the space come with the kit?

[@xraider8848]

Yes it did

[@mrobinson7750]

@@xraider8848 thanks 🙏🏾

[@SSGT1968]

I see this was 10 months ago how are they holding up? And do you still like them?

[@xraider8848]

Yes sir. They still look new. No fade, no cracks, no scratches. They are a little pricey but its worth it.

[@SSGT1968]

@@xraider8848 very cool,, Thank you!

[@steveregutis9237]

Them look badass I just ordered some yellow covers for my Dart just curious though do you think putting a little bit of thread lock on there would be a more secure fit so the nuts don't loosen up? Or do they seem to fit pretty tight already?

[@xraider8848]

Thank u. They fit pretty good. I haven't had to tighten mine since I got them. You're going to love them

[@jgweems]

You are one laid back dude. Funny though. I just ordered some for my Chrysler. Thanks!

[@xraider8848]

No problem bro, thanks for watching!

[@gamerhawk2376]

Some reviews say the brackets sometimes move/slide out of place. Have you had that happen to yours?

[@xraider8848]

No mine are still in place. I check them every time I wash my truck.

[@tanyaperales6681]

Well you made this looks so easy

[@xraider8848]

It's not hard at all jus gotta take your time. The only thing to really worry about is making sure they don't rub the rotors

[@thumper92102]

Very good directions, cool brother.

[@mr.sinister1279]

They look damn good!!!

[@kurtestes1575]

Nice video man. I just installed a set of these (purple) ones on my wife's blacked out Durango, and they look pretty sweet. I was curious how they've held up so far? I hope I don't have to tighten these up or something.

[@xraider8848]

Thanks. Mine holding up real good. Mine still look new and I haven't had to tighten since I put them on. I check everytime I wash it.

[@davidvic3332]

Hello bro what’s the price of the covers?

[@xraider8848]

Around $250. I ordered them off carid.com

[@davidvic3332]

@@xraider8848 thanks buddy

[@HAWHONU]

You said several times to torque the nuts to 25 foot pounds, that would be a fatal mistake. the correct torque is 25 inch pounds, if you torque them to 25 foot pounds you’ll snap the studs off so quick it’ll make your head spin. so exercise caution because those spot welded studs are kind of delicate.

[@chrisqzone]

Do you get any ratteling at high speeds or any weird at all?

[@xraider8848]

Not at all. They're tight against the calipers

[@mobilehimefix]

Nice work and very nice truck

[@xraider8848]

Thx bro

[@crushrreviews]

Where did you buy these ? I know there a many different companies out there making covers like this, but I like the design you used. Where can I buy them? Thx

[@xraider8848]

Carid.com

[@steveregutis9237]

Go directly through Mopar that way you know you don't get a knockoff

[@titan9m]

Sick. Looking great!

[@xraider8848]

Thx bro

[@enfield7123]

Really good video I going to see if I can get some for my mokka 👍🇬🇧

[@xraider8848]

Thx. You definitely should. Mine still look new

[@fangu5759]

Hello , I saw your video, it is so good , but I do have one question, my truck mode is :2019 RAM 1500 limited and my tire and rims size is 20 inches, the space is 275/60R20, Can I use this product in my Truck ?

[@xraider8848]

You should b able to. My truck tires are 275/60R20 as well. Only difference is mine are 5 lug and yours is 6 lug

[@fangu5759]

XRaider 88 , Thank you for replying to my message, but I don't understand what lug you are talking about, Do you mean the height of the truck ? Or the height of the brake disc ?

[@xraider8848]

No the 2019 trucks have a 6 lug pattern and mine has a 5 lug pattern. I do think your rotors are bigger tho. But they still should sell a set for your truck

[@xraider8848]

Ok I jus checked website I bought mine from and they do make them for your style truck. Carid.com is the website

[@wolfgang4136]

Thank you. I’m going to get a set now👍👍👍👍👍

[@Hunchored30]

I just put sum on my Durango n its making Squeaky noise

[@xraider8848]

Make sure they're not rubbing against the rotor

[@Hunchored30]

@@xraider8848 thanks

[@patrickadamski1258]

Mechanic probably like “ yo bro thanks for putting them on only so I can take em back off 2mar !” Lol. Jk bro. Like the video. Good stuff.

[@nice22915]

looking good man!

[@xraider8848]

Thx bro

[@centralcal6604]

Thanks for the video I'm thinking about getting some for my truck

[@azlife4me]

Looks very nice.

[@xraider8848]

Thx

[@AlB1974]

Nice video my friend. Just ordered some custom ones for my Dodge Challenger. How have they held up since you've had them if their still installed on your ride?

[@xraider8848]

Thx bro, they still look new. No fade or cracks or anything. You won't be disappointed

[@AlB1974]

@@xraider8848 Ah, cool. Thanks for the reply and the info. I can't wait to get them in and put in in time for warmer weather here in Michigan. Appreciate the love! Keep up the videos!

[@xraider8848]

@@AlB1974 Will do, and be safe up there

[@danalarose846]

Thank you for this, I just ordered mine. I love your style of house, need a room mate? Lol.

[@xraider8848]

Thx lol

[@danalarose846]

@@xraider8848 hey guy, I just got them for my car and they didn't work. Will you reply to me? Don't know if I did something wrong.

[@xraider8848]

@@danalarose846 did you order the specific ones for your vehicle? What site did you order from?

[@danalarose846]

@@xraider8848 from mgp and I gave the specs for my car

[@danalarose846]

@@xraider8848 I forgot to add, the wheel spun fine which is most people's issue, but I know they're for 17 inch wheel and higher. Mine are stock 18. When I saw the wheel spin I was relieved they would work. Until driving that is, all 4 rubbed on my rotors. You didn't have a problem with this on yours?

[@MikeShelby67]

They look good.

[@xraider8848]

Thx bro

[@bentremy]

They look good boss.

[@xraider8848]

Thx bro

[@yystyyst1567]

Nice great job looks good

[@NathanRyan.]

Great vid!

[@xraider8848]

Thx bro

[@aaratcliff]

If you take the time and paint them yourself, its way cheaper to paint them. @2:45

[@MikeStang2004]

Looks good bro 👍 How are the caliper covers doing so far?

[@xraider8848]

Good, they haven't faded or anything yet

[@MikeStang2004]

@@xraider8848 thats good to hear bro. I want to get some but I want to know if they hold up good first.

[@xraider8848]

They holding good so far, they seem well made

[@MikeStang2004]

@@xraider8848 thanx for the info 👍

[@xBonzo27PS4]

@@xraider8848 still holdin up well?

[@PersonaCultura]

Thanks Bro! ;)

[@dtaposse8858]

Thx u sir for another great video

[@darrenhelvey2327]

It looks basically easy ...I'm gettin some...

[@xraider8848]

It definitely is. Just make sure they're not touching your rotors and you should be good

[@darrenhelvey2327]

@@xraider8848 I have a 2015 gmc..it should be similar set up ...yea I seen u ran the paper underneath to see if it cleared..

[@JesusOrtiz-ow7zu]

Good job look 👌

[@xraider8848]

Thx bro 😁

[@madwestboy]

@@xraider8848 where did you buy them?

[@xraider8848]

@@madwestboy Carid.com

[@madwestboy]

@@xraider8848 would the caliper covers fit aftermarket wheels? i installed 22 inch rims on my 2006 impala ss

[@xraider8848]

@@madwestboy I think they should fit because the covers press up against the calipers. There should be enough space between the calipers and the wheels

[@donearl6675]

🤩👍

[@richardmarler1230]

DO NOT PATRONIZE THESE SCAMMERS. Check out what they told me to do when they didn’t fit. Levi MGP (MGP Caliper Covers) Oct 1, 2021, 1:14 PM PDT In order to align the covers properly on a vehicle's caliper to meet the mounting points you can push or pull the welded arms closer to each other or away from each other as required. Each arm is welded at the front plate but the rest of the arm is free to adjust without snapping. The arms are made of aluminum so they will take a stretch, see image attached for reference, thank you! Can you send us a picture that shows the incorrect fitment

[@rickylee2477]

Lol. What did you expect ? This is a ricer style mod anyway. Silly to have the big cover that only helps to hold in heat. You want the look of performance brakes but don’t want to buy performance parts. Well, you can’t hVe your cake and eat it too. High quality caliber paint cost 60-75 bucks. And doesn’t look as cheesy. Brembo brakes will run you about 3 grand to do front and back. And you get the cool colors along with performance braking. 👌

[@lorenzocarrillo]

Complete disservice to your truck. Invest into the real stuff and get compliments instead of laughs.

[@Danoie67]

$6000 for the real stuff....not worth it

[@Breez1144]

How are they a disservice to the vehicle? Anyone who isn't a superficial, egotistical narcissist would understand their actual purpose and not see them as "fake stuff" as you so eloquently put it. The manufacturer labels and advertises these as brake dust covers. They prevent brake dust from getting all over your wheels and they look better than the plain calipers that are on most cars that don't have upgraded Brembo brake packages. Once you put these over top of your calipers the difference in how much brake dust gathers on your wheels is a night and day difference than what it would be without the dust covers. They aren't sold, advertised as, or meant to be a Brembo knock-off.

[@JayGotcha5285]

Those things are garbage