MIATA DIFFERENTIAL BUSHING REPLACEMENT THE EASY WAY! |

Hard job made easy! Comment below if you've done this the hard way.
Bushing:
miataroadster....
Air Hammer:
www.amazon.com...
TIKTOK
/ omg.miata
INSTAGRAM:
/ omgmiata
#OMGMIATA | #MIATA | #CAR | #HOWTO | #DIY

[@christophercarrera7486]

I can’t wait till one day I use this information to completely bore and confuse a non car guy friend and hopefully not sound like the total nerd that I am lmao thank you tho for doing this in-depth stuff to teach noobs like me

[@OMGBUILDS]

no worries!

[@gamble900amt]

great videos man, i plan on buying a Miata as my first project car and first car in general, definitely gonna rewatch all your stuff

[@OMGBUILDS]

SWEET!

[@BrodieRivers]

Great videos as always, can't wait for the KZbin algorithm to finally recommend your videos to all the people you deserve!

[@OMGBUILDS]

Thanks dude! As long as my followers learn from these videos - thats enough for me!

[@namelast7289]

I honestly don’t know why more people aren’t watching this you do everything so professional and you also put so much work into theses videos but keep up the good work love your videos

[@justar6865]

Yeah same

[@OMGBUILDS]

I'll get there! 😃

[@clapped1.629]

How do you not have more subs?!? The quality of your videos and the way you film is fantastic 👍🏼 keep up the great work

[@OMGBUILDS]

Hah its all good! My goal is to educate the next gen of builders - getting more subs is secondary 😀

[@DrifterDavid]

So glad you posted this. Just did a swap and with the difference in the front my trans feels like its moving all over the place. I really didn't want to drop my diff either though. I just rebuilt all that stuff as well! Such a great way to do this!

[@alistairsmith6899]

Love seeing the work that you do, even though I'm a mechanic you still seem to be able to surprise me with different methods, love it!

[@theuneasyone6376]

Oh my god the cleanest underside of a car ever, it is beautiful.

[@alexmessina3383]

Great job. You've done this lots. Any idea why the Mazda workshop manual says never to remove the top collars and if you do, replace the whole PPF!!! Go figure, but there must be something to watch out for?

[@keithgerhard454]

Just did the swap, was farely easy, i didnt have to do anything with my exhuast, removed two front power frame bolts so i could pivit it out of the way. Feels better but since I run a hardtop there is alot of added noise and vibration.

[@juniorcruz960]

Yeah ya made it more easier to take out the diff bushings than the other vids that make it more harder to take out thank you guy

[@thaburninator0904]

This video is excellent, it successfully prevented me from doing this job this way. Thank you!

[@SteffenHansen1973]

Christ that's a clean underbelly (cried the guy who lives in winter country who's Miata is covered in black gooey rust protection) And thank you for sharing this. I'm in the process of dropping the diff to replace the bushings - and the air hammer instead of the burning/drilling/saving/outer space-methods is 100% pure win!. Thank you. (And Subbed of course ;) )

[@kevinmorelikekevout3639]

This is definitely going to help your KZbin career I feel like people needed a face for the car bc you’ve been doing a lot of POV but for ppl who don’t follow your insta and stuff this I’d definitely going to start putting a face with the cars

[@OMGBUILDS]

Thanks man! I don't care too much if people know my face hahha! I try to avoid being another selfie channel. We are all here for automotive knowledge - not what Dionne looks like =)

[@keithgerhard454]

Good video, good sense of humor, you should have a show on motortrend. Btw wife's birthday is 19th December. I make sure she gets two gifts!!

[@Bakewhilebaked]

Great trick, this will save a lot of time! What kind of air hammer are you using? Looks like the bushing came out fairly easy.

[@OMGBUILDS]

Ingersoll Rand Air Hammer 114GQC

[@HOONRV]

how do your videos not have thousands of views the quality and info on em is immaculate. keep it up !

[@sirzenith6002]

Steeeeve_deal your MX5 is pure inspiration man. from New Zealand😍🤘🤠

[@ermeksatymkulov7091]

sickest miata out there! inspired me to work on my miata also!

[@OMGBUILDS]

Thanks dude!

[@kirillchumov3551]

Dude... I think it would an amazing piece of content if you would collaborate with @obsessedgarage for a full makeover. It would be so awesome. I can see how both of your persuit of perfection would be a force that’s unstoppable to tackle that garage of yours. @omgmiata Pleeeeease.

[@OMGBUILDS]

would be interesting for sure!

[@TheRealSuperJ]

Great video man. I respect the level of care you put into working on your car!

[@krustyplunger7539]

@dankwenes Happy b-day, keep up the awesome work.

[@jae350gt]

Great work! I need those hammer tools lol

[@OMGBUILDS]

Amazon!

[@joshparry6123]

Great video as always! Love this build

[@OMGBUILDS]

Thanks man

[@Jeshter2000]

Im just here watching you build one awesome car!

[@OMGBUILDS]

=)

[@theshagster2091]

@is_ivan_ Really needing some engine mounts, mine are stock and from 1989 so they need to be replaced. Lol

[@odubwede8337]

Merch drop coming soon?

[@OMGBUILDS]

yessir!!!! and new SITE!

[@isaiahgrandon5289]

10:36, he just uses an air hammer in a circular motion around the edges of the oem rubber bushing.

[@martineagful]

@martinismartian quick detailer is the best! Hope you win the Hot Wheels car!

[@justar6865]

Great vids

[@OMGBUILDS]

Thanks!

[@epp9122]

Never seen a fuel pressure gauge under a car! 😅

[@J0WAY2FAST4U]

@jjtuner For the AWR mounts! 🤞

[@molikeabossboss3857]

Thanks for the support Ma brother 🙌🏽🙌🏽

[@darcytran]

You made it look so easy taking out those bushing 😂

[@DRTYWRK_MOTORSPORTS]

Hooptiegang need those mounts 😂

[@kaptinkitten4911]

is.that.garrett would love to get those engine mounts lol

[@NonstopBepis]

Is there anything stock on the beauty? 😂

[@OMGBUILDS]

LOL - not sure

[@simonchayden]

@haydomiata_dbdailys the most complex Miata build out there it’s incredible

[@otroflores91]

Do you need to remove the little collars on the ppf?

[@noncog1]

Waiting eagerly for engine mount comparison

[@OMGBUILDS]

Realllll sooon

[@noncog1]

@@OMGBUILDS I'm stuck between innovative and bfw drop mounts rn, will be ordering before long, hoping it adds insight in my decision

[@OMGBUILDS]

@@noncog1 Innovatives got 3 slots i think vs just one set hole with the BFW

[@noncog1]

@@OMGBUILDS yeah, but I dont need adjustment, just a 1/2" drop, I'd go bfw, but I've heard some negativity about them, so I'm interested in the innovative

[@noncog1]

@@OMGBUILDS I bought the innovatives tonight, I couldn't hold off on the girls Christmas any longer, along with fm poly diff mounts and door bushings. Still looking forward to your review, I made my decision based on greg Peter's channel.

[@ldadol]

Wow I’m buying an air hammer

[@ridewhencan]

Didn't work for me. Got to where I was trying to air chisel the bushings out but no go. Tried PB Blaster, heat gun and lowering the car on a propped up steel bar. Nada. OE route for me next. 28 yr old bushings, this is going to be a project. Cool vid though.

[@otterside1827]

Long_t_nguyen and miata go burrrrr

[@ksohler]

@ksohler @eunos_kaden You fr make the best Miata tutorials

[@BanguinTheGreatLord]

@dylla.wav pulling my engine soon so these would be sweet to throw into the Miata

[@PanditaP]

Dude you're fucking amazing. I can't believe you don't have more subscribers.

[@Pimpjosteph]

j0steph 🤘🏻🤘🏻❤️

[@drewewing7597]

@drewskiiiiiiiii is the Instagram good sir!

[@tunerhead]

I thought you had the racingbeat brace? did you switch to the Flyin' Miata one or did you always have this?

[@OMGBUILDS]

I actually own both - the FM is way beefier and preferable.

[@tunerhead]

@@OMGBUILDS thanks for the input man. For 30 more I guess flyin Miata is the one to get then

[@Monje760]

@mapler_monje huge fan man been following you since the smart car and before you got the cayman love your work and your videos you legit have helped me build my eclipse without knowing!! I just hope you keep yo the videos I appreciate it man!

[@TWIRKNOLOVE]

Anyone have any ideas how to do this without an air hammer? I have access to a lift too if that helps.

[@ebitgilbertbulelogo7312]

I'm very very love miata. So, i think your miata is awesome. Can you upload the time lapse build of your miata. I'm so curious with that. Thanks.

[@OMGBUILDS]

thanks - I don't do timelapses since it isn't very helpful when teaching people how install are done.

[@ebitgilbertbulelogo7312]

It is very helpfull another men with miata who want to build a miata. So i think you can mix all the vidio you build your miata and make a time lapse. Thanks

[@seanmoren7814]

smoren_ Love the attention to detail in every aspect!

[@jojojoko4757]

@ijmalinowski Awesome vid btw!

[@JAKEOFALLFADEZ]

@Ganoobiee keep up the good work, fuck the haters.

[@rewarding_roadster102]

@rewarding_roadster AWR Mounts FTW!🤘

[@histandard31]

How did you get that flyin Miata brace to look like that? Mine came coated in what looks like flaky blsck wrinkle coat paint. Not very happy with the finish.

[@OMGBUILDS]

Sanded it down!

[@gangstarboy702]

Yoooo, the party over here or what? 😉 🎉 - @pogegraphics

[@MarcMutilation]

@miatamarc_ Would love the engine mounts! Stay watching for diy projects. Thank you!

[@purpdoxx2651]

your miata is unbelievable!! keep it up man. i love seeing your car @leanne_heath_

[@MFETmusic]

Sir.bellamy 🤞

[@matthoffmann947]

@matthmx5 This is the cleanest NA out there

[@elmoz122]

That air chisel

[@bennigek7196]

I wish my car was as clean on the bottom as yours. Anything i touch on the bottom of my car end up with rust dirt and grime falling down.

[@billteaful]

trillillbill

[@ilovebuhbbles2308]

@bro_manny0 Love your work, really looking forward to those taillights. Also that lime green and orange edit on your latest IG post❤️

[@acehypoxia8323]

G: acehypoxia I’d love those motor mounts

[@mrgarard08]

Best Miata content out there! @mrgarard

[@LEGION-IMMORTALS]

@Doms_msm You know the deal! 🤙🏼

[@sugoi4983]

8:36 thread a bolt in that metal collar and remove it the proper way so you don't have to hammer out the captive nuts.

[@kaxjr3403]

When are u dropping thos taillights i need them! 😭

[@Lucky_13_Exploring]

Suicidal_miata I need engine mounts too 😂

[@justinleon8183]

@Jostin_lr100 love your vids, I’ve learned so much from you!

[@boyvid555]

Congratulations mane @ oldirtybooyin

[@thefalsecube6934]

@jonathands_8 would love to replace my motor mounts on my 95’, and love the build!

[@ViNnIePlZzZ]

@vinnie_lomeli i need those mounts

[@gabrielespinoza526]

I'm going to have to try this. Also, #awrracing giveaway! @gaby_rspec

[@davidstautzenberger9708]

Can’t wait to see this car finished! Insta: @miata_things

[@erock006]

This man knows his stuff and his ridiculous builds are great. IG: @ Project_skydream

[@christianzinn7636]

Why Racing Beat and not Flyin' Miata or Eibach? By the way, what's your name? Every time you say it, you say is fast and I can't hear it. Sorry but I'm an OG that never took care of his ears. Like your attention to detail, as I'm the same way. Don't have any photos scanned of my 1976 CJ-5, but I had over 60K of 1970's and 80's money in it. It had a built 6 and every thing in the engine compartment chromed except the Holley 4 barrel carb, that was 24 caret gold. I did things like having the power steering pump housing taken apart, then polished and chromed, then put back together by the rebuilder (not just the can from the pump, but the pump itself). All the electrical wiring in the engine compartment was braided stainless as well as the hoses of course. Just crazy over the top detail. It was as much go as it was show. I jumped it so high it bounced off the wheel twice when I landed! So I can relate to you. Really been enjoying you videos! Thanks, Chris Zinn

[@Crispysz]

@scott_someone_ love the vids and car dude

[@wilsonwang5571]

@wilson_xwang Need those engine mounts (:

[@rlwhorms4783]

@ricky_whorms 🤞 need some engine mounts

[@failbox.]

@failbox Love the NA man

[@Z.L.Artworks]

@lucifer.mx5 is my insta I never knew you had a channel I watch your insta stories daily. Absolutely love the amount of time and effort you have put into this car. Hopefully mine will be as nice one day :)

[@jacobw4340]

jaco6115 The Miata is a work of art

[@alexhytrek8415]

Going to have to use this when I do mine. @alexandrhyt Could use a set of those motor mounts too!

[@chill.7512]

haha nice cap and sweater! Taking a chance at those AWR mounts :) @anthonyignacio_

[@jacobsidorov]

@jacobsidorov on insta! i could really use those motor mounts lol

[@edr1608]

@boosted_mx5 If my car was that clean I would do that but I always need to remove a bunch of stuff to just try and clean up an area. Its hopeless for me. Lol!

[@rossmischnick]

IG - @milwaukee_miata Let's go!

[@Etherealis1021]

IG: @fabfotomedia Some AWR mounts would be perfect for mounting my forged 1.8 into my track car!

[@chrisg6474]

@myresfuneral 💪🏽 love the videos.. made me pull my engine out to shave the bay.

[@James_na8c]

@madeyski_na8c Keep up the rad content man!

[@arthurgiourdjian9071]

AWR Mounts giveaway! @artgiour

[@joshbecker8726]

Been following you on insta for a long time and yours is such an inspiration man! Keep up the great content 👏 _joshbecker

[@iko3]

I feel shame after watching how clean your Miata is lol.

[@justinleon-rendon4522]

@Jostin_lr100 love the build

[@jacobmcgrath2486]

jacob_87fc 😁 Love the channel. It's great to see all the little details that make it so clean.

[@hmadams00]

Hayden_adams_23 always love your ig and KZbin vids