Mic Stands, Booms, and Shock Mounts

[@jaimepantoja5233]

this man really made really made an entire video talking about mic stands and mounts while being able to make interesting and entertaining as hell.

[@IndigoChild007]

You just saved me SO much time. It covered everything!!!! LONG LIVE KZbin!!!!!!!!! Thank you!

[@CoolFilmMovies]

watch my newest video to find out how to make a mic stand for under $1:00

[@thegeogian]

Fantastic video. Great introduction from someone who knows very little about this subject. Thanks!

[@thewhiskeycowboy-official]

I have uses all of the ones presented (though not those brands). I started with a simple desk top mic stand since it was most affordable. It however takes up real estate and as shown, often times not in the most ideal placement. Then I moved to an off desk boom (straight arm) setup because I had all I needed for it already with the photography equipment I already owned. That allowed me to free up desk real estate and move the mic exactly where I wanted it. But it was pretty much fixed in place and could not be moved around with ease. And its stand base took up FLOOR real estate. Then I moved to the scissor boom. There you go! This is, in my view the best option all around since it allows for not only perfect placement, but virtually limitless adjustment and placement options while also allowing you to have free movement of the mic. And they do NOT cost that much. You can spend as little or as much as you would like. They only real consideration IMO is how much weight the arm will support. But unless you just WANT one of the other types of mic supports, I would suggest simply going directly to the scissor boom from the start. And like I said, their price ranges will match the others pretty closely, and you can start from about $35 and go up from there. On another note.... scissor booms just look cool. LOL In my studio I also got a smaller scissor boom desk lamp that compliments my mic boom. And if you are like me, visual aesthetics matter and make me feel better when working. Cheers!

[@PartyUpLive]

Like you said, visual aesthetics are very important. I recently upgraded my desk setup and got white cabinets and shelves and it made a huge difference. And it doesn't have to be too expensive. Best decision I've made for my setup. And I ended up using a stick stand desktop mic stand. Mine extends 27 inches so not in the way. Works great for me.

[@Prawnchowmein]

Best mic review on KZbin, thanks so much, your a great speaker, and the mic your using sounds terrific. Thumbs up all the way from London

[@migorvortis]

I've only recently begun investing into setting up my mic correctly, as I was unsatisfied with audio quality. Your video provides a very good overview over what to consider and where to start. Thank you very much. More people should see this!

[@RichLunaMusic]

I’m trying to learn more about microphones and all of the gear that goes with it. I noticed you really break it down to people who have no clue with the way you speak and I like that.

[@BankAlexander]

WOW. A real PROfessional! I don't know how to handle this quality.

[@Reckless0969]

Wanted to take a minute and tell you, great job! All around an amazing review!

[@damianinsight]

Nice quick review of a bunch of ways to handle the mic without a handle.

[@_xay_2845]

Will boom arms help with little vibrations?

[@antoineinniss5586]

For beginners on a shoe string budget....what budget boom arm mic stand would you recommend , that can offer some measure of durability , until upgrading is possible ...... also, what budget condenser microphone would you recommend for start up, that will offer a warm, full sound

[@cbasrm768]

Antoine Inniss innogear. Very cheap. Just get a shock mount

[@Mauuuurice]

Hey, thanks for that overview. I was thinking about a boom, but will stick with some cheaper ones in the begining. Btw. it would be really usefull to use the audio of the mics we see in the video, wouldn't it? So we could actually hear the Mug on the Desk with or without propper protecion of the mic.

[@kylehawkins4936]

if i have a dynamic mic (audix om2) and i buy a boom with pop filter (it clamps to the desk) do i need a shock mount also i subbed btw awesome channel!

[@bloodswarms]

This was a great video. Worth watching for the link to the flush mount. Building a custom podcasting table right now, and that part is a great find. Thanks for that. Subscribed!

[@ForgottenT]

What's the best for a PC mount, I want something to hold the mic in front of my mouth while I talk to friends and we play games, however I don't want the stand/boom to impaire my vision, and I don't want it to pick up my keyboard which is a big problem right now. I got the AT2020 Mic.

[@neilruedlinger4851]

+MarkSKristensen For the use you have in mind for your AT2020, have you considered a floor standing overhead broadcast boom, and use the AT2020 like a Shotgun microphone, to pick up your voice from over head? Something like this: images.sdj.netdna-cdn.com/D/Galaxy-Audio-MST-C90-90-Inch-Standformer-Quick-Set-up-Standard-Boom-Mic-Stand-detailed-image-2.jpg I don't know if the brand 'Galaxy Audio' has a shock mount to suit the AT2020; may be best to ask the manufacturer. BTW I don't know how good the quality is of the 'Galaxy Audio' products as I've never purchased their brand before. I searched google images and that was the first image I came across. Have you approached B&H Photovideo for help and advice on your requirement? I have bought from them a few times, and I recommend them for their high standard of customer service, their web site is: www.bhphotovideo.com

[@HDSpuerstar]

What's the one at 8:20? It isn't in the info box

[@JasonVoorhees-lu3lu]

Does it work with snowball ic?

[@tissilix]

did you buy several of the same microphone for this!? good gosh!

[@ankshious]

Anyone know what the name of the stand at 8:30 for some reason he doesn't say what it is

[@Xman3000x]

So if I have a shock mount any of these mic stands should work?

[@djwavepad420]

the mic stand you showed off at 7;27 i use it and it works for my mic works well

[@alish2001]

He really is a great speaker

[@nathanbrewer6032]

Checkout the Samson MBA38 and MBA28, currently available on Amazon at $50.00, IMO as good as either the Rodes or Heil, similar in design, quiet and rock solid.

[@bownsir]

Great video and some great recommendations. Was initially looking into the MD5, but the ProLine MS112 is probably what I'm going to go with.

[@Tima33.4]

wt do u think about yeti mics?

[@metatronmen2431]

Awesome video.

[@ashraffouad]

Wow information, answered a lot of my questions.

[@dan3510]

The ProLine MS112 Desk Boom Mic Stand, will a RODE shock absorber attach to it as far as the treads? Great Video!

[@mikeburke1348]

Very good video, sir. Thank you very much.

[@GelasticSnail]

I really thought you were Jeff from the Overwatch team.

[@VOGMTV]

Nice one. Good review.

[@Cutemonster]

I'm looking at the Heil PLT-2 boom arm for my EV-RE20. Do you recommend purchasing a separate clamp instead of the default clamp that comes with it. I'm not looking to screw it into my desk but rather just want a stable solution if the default clamp is inadequate. Also, what do you think of the Rode PSA-1 boom arm for the aforementioned mic? I'm guessing I would also be purchasing the EV 309A shock mount for whatever boom arm I get. Thanks for your help. Do check out the CuteMonster Show podcast if you get a chance. It's on iTunes and Stitcher.

[@NeoStorm_401]

Do you think the Samson boom will fit with the Heil WM-1 wall mount. Please help thank you

[@MSimky]

How do these stands compare to booms if you're using a shockmount and the stand is adjustable height? Does the boom help absorb the vibrations, or is just the shock mount enough. Also, what about floor stands so you don't have the desk vibrations?

[@0eulogra0]

About the arm stand at the end, can you lower it lower then the desk to pick up an amplifier or a guitar?

[@누리-q8e]

can the arm stand do fold down completely ?

[@jimpennock4666]

Hi Dan, Thanks for the info. Do you transmit much desk noise with your Heil boom clamped to the desk? I didn't hear anything but wonder if you are just disciplined to NOT plop something down on the desk or the like. Thanks again ... jacques

[@RealHipHopizOvaHere]

Great video, very informative. I know this is aimed at podcasterz etc., but I am wondering if it is advisable to use a boom as an alternative to a traditional mic stand for recording vocals. you never see booms in vocal booths so maybe there is a reason why they are not got for that purpose?

[@allansiegle861]

Where did you get your boom mic stand?

[@davidtselnik332]

I want to put a computer microphone on some kind of support. However, no matter what kind of of support I choose, desk stand, desk stand with a gooseneck, or boom arm, if I want to have my microphone in front of me and rather close to my mouth (4-6 inches), then this assembly will partially obstruct the monitor of the computer. What is the best way to overcome this difficulty?

[@HyDRoTheTrickShotter]

How many microphones do you have lol! Keeps bringing out the 3k mic with different stands without re-attaching them xD

[@zevo9314]

my favorite part of that is that they're all the EXACT SAME mic. i'm not surprised a professional would have many multiple mics, but there had to be near 10 of the exact same one lol

[@maricristinacastel]

Great video, the problem is that I do lifestreaming, for conference interpretation, I am struggling to not having my shure mv51 and the pop filter all over my face.!

[@LauraNunez]

Hello! for a Tascam DR40X, can these arms be used? or which one could work for it the best? Thanks!

[@alicemolan9594]

really useful video, thank you.

[@Eddylive]

Great job enjoyed that

[@gwynbleiddroach2589]

what stand should I get to mount a Neumenn TLM 107?

[@mikeverzosa2061]

I'm thinking of picking up the SB2 for my PR40. Will I be able to pivot the mic at the "mic end" right off the bat?

[@ReynaldoIvanPena]

I need a boom arm that can reach 60 inches horizontally

[@GussAGaming]

What should I get for my blue yeti for my gaming videos

[@investertiger3777]

Damn it...I was looking for a vid on holding a boom pole if no one is around. If I am close to the desk that defeats the purpose. I want one that stands up at a distance.

[@xanderskullion]

Great Video and I cant help but admire all the kaiju and tokusatsu love ^_^ in the background

[@PrasGaming]

Thanks for the info!Great video!!

[@saucyg6371]

I bought an audio technica shock mount for my RE-20 because of it’s compact form factor but it sags immediately after tightening it to the mic. So I picked up the Heil shock mount and I hope it works because I don’t want that clunky ass re-309 mount.

[@jamesmelton7637]

Flogging that Heil gear a bit hard aren't you? :)

[@agut3704]

Does a dynamic mic need a shock mount?

[@neilruedlinger4851]

+AG UT Depends on the dynamic mic used. I am waiting delivery for a Sennheiser e845S, and according to the marketing blurb, it's claimed the "Full metal construction and extensive suspension and shock-mounting minimize handling noise and signal interference." If the 'extensive suspension' and 'shock-mounting' do successfully minimize handling noise or desk 'thumps' then it probably doesn't need it. As the old saying goes 'the proof is in the pudding'.

[@alexm7047]

That M82 is highly underrated.

[@DameLuthas]

Great Job

[@revadan]

Telefunken M82? only 1 review from amazon? in fact this video is 2 years old.

[@NutsAboutGaming]

Good video about explaining that spider thing... Now i know what to find

[@Dany-G.]

great video

[@fredyrocazaurus8420]

I use presonus M7 phantom powered mic and everything was fine until today. It makes strange high pitched low noise hiss when i put it over the mic stand. Only when the stand gets near, it makes noise. Any Fix ? Please help :-(

[@soapoperanation]

Thanks Dan, very informative:-)

[@77MyEsha]

Please could you tell me if the Aston mic mounts would fit on the Rode PSA1 boom arm which I belive has a 3/8" screw mount?

[@lewted6617]

clicked because i thought the thumbnail was jeff kaplan

[@TEENX377]

Lewis Long same

[@nightriderow]

xD

[@alertArchitect]

I would love to know if you could find a third party shock mount and a good boom arm for a Razer Seiren. I've been searching for a while, but I cannot find any, though that may be just me! The ones that Razer sell are a bit out of my price range, as I am planning to buy the Seiren mic, a third party pop filter, a third party shock mount and a boom arm for it. The Seiren itself is about 4.72 x 4.73 x 11.74 in, according to Amazon, and since you know more about recording in general, based on what's here, a recommendation or two for the accessories to go with the microphone would be greatly appreciated.

[@neilruedlinger4851]

+The alertArchitect Have you visited the B&H Photovideo online store and checked their extensive range of products or asked for their guidance? I'm an amateur short film maker and I've bought from them a couple of times, and I have a friend who is a professional film maker, who have purchased from them also, and they have excellent sales support. We both live in Australia and B&H Photovideo are based in New York, USA, and when their prices are competitive (including delivery) I prefer to buy from them. Here's their web site: www.bhphotovideo.com

[@alertArchitect]

Thanks for the help! As I've said, I've tried to find some good accessories. I've not heard of this website before, so thanks for giving me a better place to start than some dimensions on Amazon!

[@DaCake2]

Im currently trying to decide between the onstage desktop stand or the gator frameworks. Has anyone had an experience with these two? I noticed the GF is a little more, but I wasn't sure if it was better or not? Any advice would be appreciated.

[@acspectator8636]

My family's current computer desktop doesn't have long enough protruding edges to allow any boom arm with a C-clamp... So a desktop stand will do for now.

[@acspectator8636]

And still I have nothing, but a small plastic tripod stand cane with my ATR2100 and a probably a hunchback for slouching too much towards.

[@DJDXD]

i got a floreon mic for my gaming channel and a neewer boom stand it was only $43.99 all together on amazon and the mic was on sale it used to be $109.00 now its only $30.00 the Boom Stand was $13.00

[@ipKonfig]

Will the Heil PL2T work for a Blue Yeti Mic? Also I have my Mic in a horizontal position. Does that silver join at the end allow me to do that ?

[@sillychimera943]

5by5tv, I looking for a boom mic arm that will support my at2020 usb+. Is there any suggestion or advice you can give me?

[@neilruedlinger4851]

+Captain Bones I'd recommend contacting the good folks at B&H Photovideo, they have excellent pre and post sales service. I'm an amateur film maker and I have bought from them a few times, and they have never disappointed me. I have a friend who's a professional film maker, and he prefers to buy from them too. Here's their web site: www.bhphotovideo.com

[@christopherjbutler]

@5by5tvI have an EV RE27/ND which uses all the same accessories as an RE20. Considering the HEIL was designed to fit RE20 accessores, would the PRSM fit my RE27?

[@magicmildred9119]

nice video

[@nicholashill8002]

M.M.M Gameing the stick booms slidable part that can allow another microphone to be added is something I have been looking for a long time.

[@matcarpes]

great video!

[@fallenslave6684]

so about 800 in total?

[@laughinbuddha3338]

thank you..

[@thomasscheffrahn7607]

bro why would you buy that expnive mic if you can get almost the sme mic for almost 30 bucks or cheaper

[@neilruedlinger4851]

+Venlity Different people have different voices, and one person on a particular microphone, may sound different on a different microphone. In terms of cost, cheaper microphones are Ok if a person has unique voice frequency characteristics making them sound good. In terms of durability, cheaper microphones may not last as long, compared with higher cost microphones. Higher priced microphones also have additional built-in features to help reduce handling noise, or different pick-up sensitivity patterns.

[@neilruedlinger4851]

+Venlity Selecting a microphone, is like selecting a pair of shoes or a hat; the user must be comfortable wearing the shoes or the hat, or the talent must feel their voice is recorded for the clearest possible play back quality. Different people have different voice frequency characteristics, and one microphone may have a particular low frequency, mid-range frequencies and high frequency characteristics that makes the talent sound really good. For example Rode microphones emphasize low frequencies much more, and a person with a deep voice, or somebody with strong low frequency voice characteristics may sound "boomy", so Rode may not be a microphone choice they would be happy with. A person with particular mid and high frequency characteristics may sound better with a Rode microphone. Other people may sound better having their voice picked up by a Shure or Sennheiser microphone. Whilst other people may have a voice, with particular frequency characteristics that sound really good with a cheaper microphone. Higher priced microphones also may be built from more durable materials, such as a metal body, and internal metal components for ruggedness. Or they may have internal construction that minimize handling noise, or a built-in pop filter. Another issue is the microphone may have a supercardioid or hypercardioid pick up sensitivity, or consistent off axis voice level pick up. Also other microphones may allow for the talent to stand a few feet farther away and will still pick up the voice with a consistent voice level. Another design feature is a microphone may have the ability to handle loud noises or performers very well, without any audio saturation or distortion.

[@mrmrlee]

Surprised that wooden mic booms are not a thing...I made a homebrew wooden mic boom, complete with cork bushing where the mic holder attaches to the support, sweet! Eliminates all noises through the boom and desktop. Best part, free from miscellaneous stuff around the house.

[@ericthetroll4929]

Did you quit your channel?

[@wizard7564]

Minion from spykids?

[@AdamYUp]

why is it better to get a mic stand?

[@neilruedlinger4851]

+Nefph Depends on individual needs. Microphone stands are for hands free work; for example if the talent prefers to do voice over work whilst holding the script to help them keep on track with their performance, or some people need to operate a keyboard or need to move their hands as they express themselves, a mic stand is very useful.

[@hijaumorson]

Remind me of pastor

[@VaporSlav]

Blue yeti is a great cheaper alternative for the mic

[@zac4388]

Don't get the blue yeti, it's basically a toy

[@CatholicTruthOfficial]

@@zac4388 Is it? It is the most recommended mic by almost everyone, podcasters and such.

[@zac4388]

@@CatholicTruthOfficial I'm talking for professional levels, USB mics don't have the internal power to be good for anything except for Skype chats.

[@CatholicTruthOfficial]

@@zac4388I'm looking for a near professional mic for KZbin videos and podcasts. Any recommendations? I was thinking of mid-high end condenser mics like the Rode NT1-A or NTK for example. Thoughts? Thanks.

[@zac4388]

@@CatholicTruthOfficial Rode nt1 and audio Technica at4040 are around $300. They're great to start out. If you can't do $300 then the audio Technica at2020 is $100. It's the next best thing.

[@LethalShadow12]

This guy sounds like Leonard from The Big Bang Theory :D

[@tarve2010]

Hi. Thank you for the helpful video, but I am on a very tight budget and someone recommended that I buy this mic stand. The Auray MS-5230F www.bhphotovideo.com/c/product/755877-REG/auray_ms_5230f_tripod_microphone_stand.html I am just curious if it is a good mic stand and can it be placed in a room with carpeting? As my room where my studio will be setup is all carpeted. Thanks for the help and advice.

[@tarve2010]

One note. I will be getting the Focusrite Scarlett 2i2 Studio Mic.

[@neilruedlinger4851]

+Michael Lanfield Raw Vegan Fruitarian I'm not sure if you have already gone ahead and purchased the microphone stand; have you contacted B&H Photovideo either by 'phone or email? They provide excellent customer service, in my experience when purchasing from them.

[@neilruedlinger4851]

+Michael Lanfield Raw Vegan Fruitarian I'd recommend contacting the good folks at B&H Photovideo, they have excellent pre and post sales service. I'm an amateur film maker and I have bought from them a few times, and they have never disappointed me. I have a friend who's a professional film maker, and he prefers to buy from them too. Here's their web site: www.bhphotovideo.com

[@Rayan-nf2wi]

Who knows any Mic Stand that is good for the Razer Seiren???I NEED A REPLY AS FAST AS POSSIBLE BECAUSE I MIGHT BUY THE RAZER SEIREN!!

[@olivermadariaga]

dont. get AT2020 or AKGP120. the seiren will break on you after a few months

[@neilruedlinger4851]

+RyanGaming I'd recommend contacting the good folks at B&H Photovideo, they have excellent pre and post sales service. I'm an amateur film maker and I have bought from them a few times, and they have never disappointed me. I have a friend who's a professional film maker, and he prefers to buy from them too. Here's their web site: www.bhphotovideo.com

[@NoName-nw5kn]

You can give me one of your old PR 40s. I won't be mad if you do.

[@TechNoGamer-qx9pu]

Cool mic~-~if you got the money.

[@kimchong9198]

Gosh dam

[@antoineinniss5586]

Wait a minute ...does this guy even reply here?....smh.....all these ppl commenting, including me.......and not a single response

[@ericthetroll4929]

Antoine Inniss yup he quit youtube

[@magik8566]

Good video, but Ultraman gets a thumbs up LOL!!!

[@glick278]

HareKrishna&GodBless❤️🙏

[@DrLumpyDMus]

4:35 "These are great" . Really? Those off center, cantilever boom clamps have been failed catastrophically on every boom I've ever seen. I don't see any improvement in the Heil clamp over the YouHappyBuy brand clamps. That off center hole just creates too much leverage for that tiny clamp. The desktop and flush mount, and some other brand clamp mounts, don't put the boom hole on the edge of the assembly. I would never recommend, use, or install a clamp on mount with that off center design.

[@GamerCo29]

You'd think that someone who's talking about microphones and stands and such, would have better audio..

[@matrixate]

SM57 into a audio interface and a basic vocal chain....done. No need to spend ton a money.

[@highscores6360]

is it righty tighty lefty loosey?!?!?

[@johnewald3148]

NOT A TOY!! hahaha....

[@houstonbrooke658]

Jeff Kaplan

[@Zxenmusic]

9:30 you assumed from the outset that we'd want a boom mic for a desk setup? Why didnt you say so, or put it in the title? More internet pollution.

[@jarzo9259]

100th comment

[@Sukilovs]

aliexpress microphone stand, only 10$