These cheesy guitar riffs were made for this build lmao. Love watching that phat motor get put into place on this raptor!
@Rippers123427 ай бұрын
Thanks man for you well made video!! Helped me a lot with my 2006 raptor 700 that i got in a box to rebuild it. I saved a lot of time with your video.😁
@MichaelSabo7 ай бұрын
Glad my video helped you out and thanks so much for the super thanks man!!
@daniifernandez36 жыл бұрын
this beautiful the raptor, congratulations, greetings from Argentina
@MichaelSabo6 жыл бұрын
If you haven't already, follow me on instagram to see pics of the Raptor all done!!! And I know I know, the FB and insta tag is messed up in the beginning. Also, there is a thin film of anti-seize on the swingarm bolt!! I didn't film putting it on.
@briancrouch61462 жыл бұрын
Michael I just put new jug where is head oil bleeder bolt
@Sciitch6 жыл бұрын
Coming together nicely! Got my own raptor after watching all your videos, love your diy style! Keep up the good work, looking forward to the running videos 😀
@33boblong6 жыл бұрын
Awesome video Michael an that's great glad u got it done an up a running
@nelsonkarrer31436 жыл бұрын
Good job
@The700XXrider6 жыл бұрын
It's always awesome to hear one fire up for the first time after all that work. Great job!
@blackbartbartholomew71226 жыл бұрын
Mike, you keep doing this stuff you need to invest in a atv lift. I would if I were you. Great Vids, I learn a lot!
@lifeatv6 жыл бұрын
Love the look with the graphics! Quad looks awesome, trying to do the same with my 2006 TRX 450.
@AaronMartinCOOLVIDEO6 жыл бұрын
Sounded pretty good for a few seconds you had it running after all the work they put into that bike I'm pretty sure it will last you a good long time nice job. 😎👍💯
@MichaelSabo6 жыл бұрын
Thanks man; I hope so too!
@bricehale65936 жыл бұрын
Nice to see you get it up and running man I just sold my 2003 660 for two grand and bought an 04 660 with a 686 Big Bore Kit for 500 bucks it runs but when it gets warmed up it starts spitting and sputtering and dies out on me I'm hoping a new carburetor with a 686 jet kit will fix it may make a video on it but congrats on the Raptor project turned out nice you do good work bro
@xtune57316 жыл бұрын
Brice Hale new carb? Why not just clean it out
@bricehale65936 жыл бұрын
Turned out as blown head gasket paid 500 for it sold for a thousand
@noelshed6896 жыл бұрын
Nice one 1 cool raptor
@isaacmolina90976 жыл бұрын
Whats up michael sabo great vids keep Up the good work!!!
@daddydubz886 жыл бұрын
Your videos are awesome and Thank you for taking the time to make them. Very educational and well edited. My only problem with the build is with all the internal upgrades you did you didn't do any work to the head, no larger throttle body, no full exhaust, and no intake? Seems like those internal upgrades are going to no use.
@MichaelSabo6 жыл бұрын
Thanks so much for the love man. It is mostly because of money that I didnt do further upgrades. This quad was supposed to be a quick flip and turned into more of a project. I didnt want to cheap out on the piston but if I had more money for the build I would have done more.
@legacygarage50566 жыл бұрын
It started !!!! Dope
@Corpse19845 жыл бұрын
Cartman should have popped in while Mike was carrying the motor and yelled "BEEFCAKE!"
@ELViSLOK6 жыл бұрын
Nice!
@dallinbrimhall10336 жыл бұрын
Awesome to hear it start!! And just like the rest of the commenters you should have greased the swingarm Bolt Edit: saw the other comment about the anti seize on the pivot Bolt so nevermind
@Davido503 жыл бұрын
It just purrrrrrrred. Great engine build & typical Yamaha engineering excellence!
@DirtbikeNb6 жыл бұрын
No grease on swingarm bolt? You have huge nuts 🤣
@MichaelSabo6 жыл бұрын
I did coat it with anti-seize, just didn't film it.
@yansheeold_b91476 жыл бұрын
awesome fromm paris
@victorgerhardt1504 Жыл бұрын
Looking Mean!
@MichaelSabo Жыл бұрын
🤘🤘
@darkrider62014 жыл бұрын
Hi, 🙋♂️how many ft pounds the Swing Arm bolt?
@rpmjunky27956 жыл бұрын
Please tell me you didn’t put that swing arm bolt in dry☹️
@MichaelSabo6 жыл бұрын
Everyone is saying this!!! I coated it with anti seize but did not film it! 😂
@rpmjunky27956 жыл бұрын
Haha😂. So this mean your getting rid of the banshee now? I’ll take it off your hands blown or not
@redman87456 жыл бұрын
Good shyt✊🏽
@kenancoskun19134 жыл бұрын
I know how hard it is to fit the engine bolts into the frame😭
@bdogjr77796 жыл бұрын
Awesome Mike 《☆》
@matthockey846 жыл бұрын
Im currently doing a rebuild on my 04 YFZ450 and when I put my cases back together my crankshaft is hard to turn by hand. In order for me to turn it smoothly I need to use a wrench with the right size nut on the end of my crankshaft. Is this normal? If not how do I make it so I am able to turn it by hand easily?
@MichaelSabo6 жыл бұрын
Well, definitely don't force it. I would start by making sure it isn't in gear and then make sure your counter balances are in correctly. It's possible your cases aren't seated right. It should spin freely in neutral.
@matthockey846 жыл бұрын
Michael Sabo my cases are in correctly and the engine is in neutral. I have a small gap on the right side of the crankshaft when your looking at it from the hole where the rod is suppose to sit. The gap on the right it bigger than the one on the left. Do you have any tips on making it even without separating the cases again?
@arneallaloo75254 жыл бұрын
Hey, Hope everyone is well, am could some1 help me with the wiring for the quad? The Wires from the left side of the engine i took apart mines and cant remember the cfoonections, can some1 help me plz?
@gokartvdz22116 жыл бұрын
raptor 700 part 700 :)
@1XMuleX16 жыл бұрын
OHHHHHHHHHHH YEAAAAAAAAAAA!
@thegoodjelly49506 жыл бұрын
Things dope though I have a 660 and these raptors are nasty
@GBDunknRollCD6 жыл бұрын
First finally!
@adanmunoz54746 жыл бұрын
Why was there smoke coming out at 7:25 😂
@MichaelSabo6 жыл бұрын
It's a wet break in; I coated the cylinder with oil before installing; it burns off.
@youngtrill8376 жыл бұрын
Michael Sabo 2 cycle oil ?
@MichaelSabo6 жыл бұрын
@@youngtrill837 the same oil I put in the crankcase; a very thin film to help the piston and new rings slide in.
@youngtrill8376 жыл бұрын
Michael Sabo ok perfect I need that answer to turn on my yfz450 that I been working on
@Gotchalittleahhh236 жыл бұрын
Real question is how much did everything cost you man?!