Michelin Tweels: Should you buy them? John Deere Z920M Overview and Review

[@edisiusmurmur325]

I expect this mower will last several seasons with decent care. kzbin.infoUgkx1VWTrayKBdCKAjzAcZ_Eg4dhHTae3LkN also recommend Also, I ran across the problem with it not starting the 2nd time I used it. There is a safety switch which is pushed in by the chute or mulching piece being attached to the deck. I took the cover off and it wouldn't start. Put it back on, no problem. It takes only a minute with 2 easily accessible wingnuts and no tools. This mower starts up first crank each time and it is a joy to use. It also mows in reverse by putting the key to the reverse area after starting and pushing in the triangular button. It will stay in reverse mode until you turn it off. All in all, for my homeowner needs, I really like this mower-and at 70 bucks a cut here in Miami, it's already more than 1/3 paid for itself in a month.

[@benryals7475]

Thank you so much for pointing out that the frame is made in China. You are the first that i have seen to do so. I have wasted a week of watching KZbin videos to help me decide which John Deere zero turn to buy. I will now start over researching other brands to find the most American made machine available.

[@FrostyTheSnowman12321]

🇺🇸🇺🇸🇺🇸🟢🦌🟡🇺🇸🇺🇸🇺🇸 As American As You’re Gonna Get!

[@matthewdebord770]

I've got 2 970r's with tweels and I like them but I don't love them. The ride is a bit better and the traction is def better but when cut sideways on steep hills the deck has a tendency to cut lower on the downhill side. When running over drain fields you must slow down a bit due to the fact that the tweels flex so much it's like the g force with speed doesn't let the tire flex back into normal operating height....hope that makes sense. Just my two cents to all who may be curious. Bottom line is that I personally will keep them on future mowers but I have had to learn how adjust to the difference. Good luck guys.

[@benshankle]

Last year, I bought a new Z935M Zero Turn and after 3 flats in less than a year, I bought these Michelin wheels and tires and I only wish I would've not wasted time with the regular tires. They tires are awesome and are well worth the money.

[@JesusIsaFlatEarther]

Shank 06, in this video, he mentioned the Tweels will still tear up the turf. But it was mentioned in conjunction with mowing on hills. What about when turning on flat areas? I use my mower on nice yards and I'm constantly putting divots in the grass. So are the Tweels act the same, worse or better then pneumatic tires? Thanks

[@jdtractor7525]

If you turn without keeping both wheels moving, yes, they can cause damage. Just got to be mindful of what you're doing I guess.

[@anthonyclt]

JD's response is 100% correct. I purchased a 930M w/ Tweels a) for comfort, b) to avoid flats, and c) I was under the impression that the tweels would help me avoid tearing up the turf. Well, the Tweels are definitely super comfortable, and I don't have to worry about flats. HOWEVER, in my experience, there was zero advantage when it came to turf marks. The only way to avoid them is, like JD says, keep both wheels moving and plan your turns accordingly. PS: I was looking at purchasing a Walker or Exmark Navigator b/c I heard you didn't have the same issues with turf marks w/ those units/models. Nonsense. Tested both and you still have the same issue if you don't turn properly. FYI.

[@husq48]

Grass Flap is the best chute blocker I've used, so far.

[@anthonyclt]

Thanks for the review. One note that might help someone prior to purchasing a new ZTrak - the Tweels are NOT compatible with the MCS (bagger systems). I purchased a Z930M w/ Tweels and loved it/them. Super comfortable, zero complaints. However, when my DFS MCS arrived I was notified that I would have to swap the Tweels for traditional pneumatic wheels. I was pretty steamed. This wasn't noted on the website or on the ZTrak brochure at the dealership - so I was not happy. We confirmed this info w/ John Deere corporate support and, reluctantly, I swapped the tires out. Interestingly, the extra weight from the MCS and the front weights actually made the mower w/ pneumatic tires feel exactly like the Tweels - so I'm back to being happy. Anyhow, if you don't need an MCS - GET THE TWEELS. They are worth the price.

[@DavidSenn1]

I have a Z950R and luckily my dealer caught this one for me as I was considering tweels. Not sure if this link will work or not but near the bottom of this page there is a chart that list specs for the Tweels. One of them is the max load is 750lbs. www.deere.com/en/landscaping-grounds-care/tweel/ Physically I think they will fit fine but I am pretty sure the weight limit is the problem. What you have to run for suitcase weights differs a bit based on machine and deck but my Z950R with the 60" deck takes a fully loaded weight rack with 252lbs. I mainly use my collection system for leaves in the spring and fall. They are not as wet and heavy as grass clippings but I would imagine with a full hopper of grass clippings, operator weight and some of the weight from the suitcase weights would transfer to the back wheels when going up hills. I would imagine you would blow past that 750LBS capacity pretty quick. Also on that page right below the chart it does state the following: "*Approved for John Deere ZTrak Z900 B, E, M, or R Series gas powered zero-turn mowers equipped with 54", 60" or 72" decks. Not recommended for use with Material Collection Systems." So it is on their website but I agree that I don't think it is in the configuration part of the website.

[@jdtractor7525]

I agree, the tweels are great. I had no Idea about the MCS not being compatible with them. I know the tweels are also not available on the Z997R because of the weight issues.

[@anthonyclt]

Here's a little more background on my adventures w/ the Tweels. When the MCS unit came in and the guys at my local dealer caught the note in the instructions. You are absolutely correct about the "*Note" on the page you shared. The problem - the probability that a prospective customer would catch that is super slim. (I was reading everything I could about the 930, 930EFI, 950, 960... Rs and Non-Rs, etc. And the entire time I was conditioned to MCS and DFS-MCS, not "Material Collection Systems" - though it's obvious MCS stands for Material Collection System. Bottom line: Every sales person should be trained that the MCSs are not supported on units w/ Tweels - and there should be a short form/waiver that buyers can sign to acknowledge the Tweels limitations/restrictions so they know they might need to purchase pneumatics if they are going to use an MCS or attempt to carry a large load in a trailer (for example). Here's the interesting thing. While we, my salesman and I, were researching the situation, he contacted his tech rep at Deere here in NC. The tech said the issue was not weight related; that the MCS, even full, wouldn't create problems with the Tweels - but how the additional weight would affect the trans/motors. That sort of makes sense - the flex in the Tweels could create more strain on the motors when cutting over a bumpy surface. Regardless, he said they were still testing (confirming the note on the tech notice posted Feb 2017) the Tweels but, at this time, could not recommend their use. (In other words, use at your own risk - and if it breaks, don't expect us to pay for it.) Last, I did offer to "test" the Tweels w/ the DFS-MCS for them. No response as of yet. But, like i said, I now have the pneumatics and love the DFS-MCS (when the grass is dry).

[@johnsmallwood2180]

I have a 930m with the collection system I left the tweel on despite what I was told. I've no issues at all. Everything works as it should.

[@anthonyclt]

Good to know, thanks. I have the Tweels set aside in my garage figuring I could get confirmation that they would work. Appreciate the feedback!

[@dhix2388]

ive got a 920m over 300hrs.no issues used comerical dailey. agree with everthing in your review. failed to mention best warranty in the business. and loaner program. I have scag great machine so is the 920. dealer support is the key thanks. brand boys is what it is.

[@belindastringer7857]

*My yard consists of roughly 3.5 acres of "mowable" area with several small hills **Bestfor.Garden** also recommend and valleys and tree-beds scattered throughout. Not only did the mower do a great job, but at the end of cutting the entire lawn, I STILL had 35% left on the battery.*

[@semco72057]

As for the blades getting dull on your mower, I just purchased a Cub Cadet with the Kawasaki engine on it since my John Deere mower have one on it also. The grass when it is very tall does not mow down perfectly so you have to go over the lawn twice to get a perfect cut. As for the power, I was told to run the mower at full power also when mowing, and it works fine. I saw the new mowers and love the new features, but due to my budget, I could not afford another John Deere right now, so I got the Cub Cadet instead since it also had features I loved, except for the tires on the rear which is smaller than my John Deere Z445.

[@tonycollins109]

Sidney Mathious I

[@07redsled]

just got a 21 z915e with tweels from the factory love it!!! set front tires to 10-12 psi and rides great!

[@DPMaintenance]

Great job I just got a new 930M going to order the tweels in May where did you get that floor mat? I love it I want to order one thanks for a great review my friend! Happy mowing!!!

[@DavidSenn1]

I have a Z950R. You were talking about the "Deluxe Controls" and how you like to operate your machine with your hands lower on the controls. You can still do this on the "R" models. It isn't like you are using those buttons all the time. One is for the hydrostatic deck lift (there is no manual foot control). That is the button I use the most. The other kills the PTO. Notice I said kills not operates. If you turn off the PTO with the control stick button, to start it back up you have to go back to the main control panel and turn off the PTO Switch (Rocker or Plunger) and turn it back on. All the button does is trip the safety circuit which kills the PTO like when you set the parking brake. For me I went with the R because I have the DFS Collection System and I wanted power deck lift. I don't run it all the time and with the manual deck lift on the B/E/M versions you have to adjust the spring assist when you add or remove the PowerFlow head. Not a big deal if you always ran a collection system or never ran one but when I go back and forth it would have been more messing around. Of course the R has the foot operated parking brake. I agree with your comment than it is kind of tricky to operate. The good is if you get on and pull the control sticks in with the parking brake still set, you can release it without moving the sticks out of the way. The bad is sometimes it releases right away, other times I have to kick it a few times to get it to release. Maybe if I was mowing commercially I would use it more and become used to it. This machine is my residential mower so it sees use once every week or two. Also on the Tweels. I didn't go with them for a couple reasons. The main one is they are not compatible when you have the DFS Collection system. I think it is a weight issue. I have to run 252# in suitcase weights plus the weight of a hopper full of wet grass clippings, and the operator would likely push the tire load past the 750lbs max rating. The other reason is I just cut my yard so not much risk of nails, broken glass and such that a commercial operator doesn't have control over. If I puncture a tire and am down for a few days it doesn't matter. My machine's operational status doesn't impact my income. When it comes time to replace the tires, tires are cheap. A tire change because of worn tires with Tweels will run about $1000. If I was a commercial operator and trading machines every two years and not running a collection system I would probably go with it. Totally makes sense. It didn't in my case. They do look cool though.

[@jdtractor7525]

You make some very good points. Thanks so much for your input. I have run a 997R with the deluxe controls, I do find the pto kill button to be kind of funny.

[@Livereater]

Good point on the 'yellow colored seat' not being as hot as a 'black colored seat'.

[@williamwallace4879]

great video, i have a 13 year old JD 830A absolutely love it, still running strong..

[@ebeneden7853]

What wonderful machines, it's a pity that they do not reach Chile

[@michaelsellers2675]

I just bought a Z915 e and yes it has the Michelin wheels .

[@douglaswilliams99]

I'm a proud owner of the 997 2017 version, it's an amazing machine. The only thing I can see that might help you is you should always engage your blades at the lowest possible idle. It saves on wear and tear. I like the floor mat, nice touch.

[@jdtractor7525]

Thank you. And yes, you are correct about pto engagement. I spoke incorrectly in this video. The 997 is a beast. I’ve been able to run one a few times

[@FrostyTheSnowman12321]

ACTUALLY John Deere claims they’ve designed them to be engaged at Full Throttle because that’s how most people tear up their PTO, so they SUPPOSEDLY fixed that??

[@HandyGuy2016]

How are the Tweels holding up? How many hours do you have on them?

[@MichaelTJD60]

These days, Kawasaki is the only small gas engine I could trust if buying new. My X570 has a Kawasaki FS730V in it, same engine you have except it's 24 HP. It's a little cold blooded, but I run it for long hours at a time and it doesn't seem to give me any trouble. People complain that Kawasaki isn't American and that you should buy Kohler or Briggs, but the truth is Kawasaki is one of the most American small engine manufacturers out there and they actually build their engines to last a long time. That's why JD uses mostly Kawasaki and not Kohler or Briggs anymore, aside from some of the lower-end models. Deere cuts very few corners when it comes to these commercial grade machines. I always try to engage my PTO at an idle and then move it up to wide open. It won't really hurt the clutch but it will wear belts out quicker. But my FS730V takes a long time to really warm up so sometimes it will stall out when I engage the PTO, even at half throttle. Sorry for the long-winded post but I feel the need to touch on this subject for any naysayers who might come across this. Great review video!

[@jdtractor7525]

Every machine is different, but the Kawi engines are great for extended full-throttle operation, aka mowing. I'd trust a new Kawi over any other engine any day.

[@MichaelTJD60]

Yes sir. Kawasaki for new engines, Onan and Kohler for the old stuff.

[@Futurebeefcake]

MichaelTJD60 Briggs is lowest quality,as crappy as you can get,Kohler is better,Honda is great/best, and than Kawasaki is pretty much similar. But I agree kawis are pretty good motors.

[@michaelmactavish1728]

kubota has diesels,gas,propane optionals plus its more pto drive shafts driven then belts plus the kubota zero turns horse power is from 21hp up to 32hp

[@FrostyTheSnowman12321]

@@michaelmactavish1728Kubota * NEEDS * 35hp to keep up with a 24hp Kawi! 😉

[@carlhelmick8104]

Go to Lowe's are home Depot and get you some screen like you put on your window to keep flies out of your house cut you some to overlap your little grates down there and zip tie them in and you will stop a lot more of that grass from going down in there

[@jeffreylucas2027]

Dear JD Tractor I was wondering if you could make a viedo on mulching bagging and side discharge. Iam confused on which one to use on customers lawns. My research told me mulching is the best but I also came across other viedos that told me it basically depends on my customers, the area I live and what works best for me and my customers. I was wondering if you could elabrate on this subject and what you do.

[@andybub45]

I think Kohlers are OK. Better than a Briggs and Stratton at least. I have 2 John Deere lawn tractors, a 2002 LT150 with a 15HP Kohler Command and a L110 with a 17.5 HP Kohler Command. Both run with no issues to this day.

[@DavidSenn1]

Another thing to mention. Looks like you are running the standard High Lift Blades still. I have those for the collection system in the fall but the rest of the year I have been running Oregon G6 Gator Blades. If you get a set watch out a bit because it will change your HOC a bit because the bend profile is different. You could use the deck level gauge and dial it back in or just adjust your HOC 1/4" higher or lower and remember it isn't quite dialed in. As you pointed out that is very easy to do. I also picked up a set of John Deere's "Gator Blades" which the dealer called Predator blades I think. They work but the G6 has a larger area which is sharpened and they seem to perform better.

[@wh8085]

David Senn , What mower are you running those G6 Gators on ? I've never used them so I can't compare but I run the standard stock JD blades on my Z445 and the cut is incredible. My customers just ooohh and aahh about how nice the cut is . The only trick , as with any mower and blades , is to keep them sharp and the deck clean . Ah, I just saw on further down in the comments you are running the 950R . Nice machine. I'm planning to pick up a new machine this year and am torn which way to go. My Exmark dealer is 10 miles away and my Deere dealer is 25 miles away . I do love the Deeres but I know the Xseries Lazer Z will do just as good a job. It's a toss up.

[@jimsiebeneck7164]

David Senn 7f

[@johnkisner2561]

FYI... I just purchased a z740r with the tweels. So, they are available on smaller series mowers than suggested in this video.

[@MJF40]

I did the fronts too

[@harryerhart5978]

I just bought my 8th jd I have 955 EFI and a 636m best mowers out there 👍💪

[@hunkydude322]

id go with the john deere Z540M or Z540R wiht the Kawasaki engine they come with 48 ,54, or 60 inch width thats plenty of power. Kawasaki engines are grreatttt.

[@traceymaddox2646]

I bought the same mower except i opted for the pneumatic rear tires. it does ride a little harsh. May have to change em out.

[@shaftysgaming9857]

I ditched that side chute cover,when in tall grass the grass won't exit and it bog the mower down I stuck with the chains I had on my plastic cover that came with it

[@royjackson9576]

Great review...well done! I have a 2007 Z920 and thinking about trading up...another Deere, of course. One thing I definitely like is the rocker switch for PTO engagement. The pull switch seems like the weak point of the Deere mowers. I've replaced mine and last last season, it was failing again. Boy, wish I had that mat!! Anyway, great job and thanks for posting the video and review!!

[@johnnysmoke612]

Exmart 60 inch x-series with 31 HP Kawasaki, nice, real nice. Wet and high grass cut at 3 inches no bog downs, plenty of power.

[@JTRproductions]

that's a great john deere mower definitely going to buy one.

[@reubinthornton]

Why are the pulley covers removed?

[@odie9551]

Scag turf tiger 2 is what i use. I think it is simply the best. Also 100% made in U.S.A

[@mikewest712]

What engine you running on that hog?

[@andybub45]

I will be looking at this John Deere, the Scag Cheetah 48", maybe a hustler, and probably toro.

[@ForrestGump1212]

@JD Tractor The blades are not supposed to be razor sharp, otherwise the blade edges will be full of nicks from cutting the grass, and razor sharp blades can tear the grass as well.

[@ForrestGump1212]

Ummm no, but I take it you did? and what point are you trying to make?

[@FrostyTheSnowman12321]

@@ForrestGump1212 Tell that to my Dead Grandfather. . . Yeah tell him he’s wrong and you know better than him. . . I wouldn’t believe you if it was true!

[@garygbur3992]

What standard blade does JD ship the unit with, High Lift? And what are you using ? Thanks

[@texashunter3597]

How often do you wash your mower? Do you have how to video on wash yours? What does the shield blocker run and is it easy to install?

[@kenransom3247]

could you do a update review of the mower im looking at getting a JD Z950R as my 1st zero turn

[@jdtractor7525]

Yep. I'll try to get one out here soon. Give me a week.

[@kenransom3247]

ok ty loving the channel

[@drewamaro]

Do you run your mower without the plastic spindle covers or were you just cleaning before the vid?

[@garymiller9353]

How long are those tweels supposed to last ..... Do you have to worry about the fins breaking or cracking prematurely

[@rickyturtle3066]

Love John Deere just don't like certain things but my hustler 52 24 hp Koehler has lasted me a while but do like the kawasaki motors

[@The_Rut_Funnel]

I have these on my 915E

[@baileysnider1049]

I Will say that they ride smoother however if you are cutting thick Bermuda grass and you hot a bump they have a tendency to scalp a yard

[@marcumslawncare5121]

Bailey Snider I've put 250 hrs on mine if you don't try and out run NASCAR there's not a single issue

[@DelightedCuttz]

Can you put Tweels on a D125

[@JamesZ1025]

I wouldn't listen to what a "guy" at the dealership tells me. I'd read the manual as far as where the throttle should be when engaging/disengaging blades. And I would definately remove the tow ball on the back of your mower ! You will DESTROY your pumps towing anything with any weight to it, like an aerator.

[@jimcook9617]

I have a Toro zero turn. My manual says (more than once / bold print) Always have the throttle a max setting when engaging the blades.

[@bluffcityblightpatrol8364]

Very good video! Those stripes are really nice!

[@caleboldhouser478]

I have demoed John Deer, Scag, Hustler, Walker, pretty much everything. I can’t find anything that mows like my Exmarks.

[@atlbraveswin00]

Until you are in wet grass. CLUMP CLUMP CLUMP

[@caleboldhouser478]

atlbraveswin00 I never have clumping issues. I just raise the deck and cut a little higher when the grass is thick and wet. I haven’t had to double cut anything last year.

[@mikewest712]

Good one.

[@davidmoore8741]

2 things I don't like about the exmarks is the hydros r super stiff and the feedback is almost non existent and the the front wheels r super wide and lay the grass down when turning. Other than that, such a better mower than all the rest.

[@chaseinit1]

try the Husqvarna pz 60s if you can find one to demo you wont be disappointed

[@marceaton3128]

I am retired and I love to cut grass, I would love to do it for a living but, just too many other people out there doing it.

[@Fl4m3thro3er]

Marc Eaton just go out a start with a few yards. "If everyone does it, then you can do it."

[@kenrobertson9570]

Ha, I'm retired too and mow for the fire co. community park, 1 cemetery and some elderly neighbors. I do it for free! love to mow, the fire co. gave me a community service award. Think about it, if you really love to mow

[@sslack3207]

Don't mean a thing. They are building homes everyday and people need service. Just go and get it done.

[@regiswschulz]

Marc Eaton just because everyone is doing it, doesn’t mean everyone that is doing it is doing great work. Do a great job every time and your going to get more yards. Eventually more than you want.

[@shaunkay9950]

Marc Eaton buy a bigger yard. 😂

[@Wloo56]

The gators are built in Horicon Wisconsin

[@ksrebel09]

I'm currently shopping for a new zero turn. Originally looking at the 915 before watching this, but now leaning towards this one. Also comparing other brands..Kubota/Exmark/Grasshopper/Hustler/Ferris. Do you, or anyone on comments have any suggestions, pro cons, etc?

[@jdtractor7525]

The z920 is a great mower. If you want to look at another brand, certainly check out exmark. They make a fantastic mower. I don't personally have any other experience with any other brands. I am biased toward Deere, and they have one of the best warranty and loaner programs in the industry.

[@illuminatedcrosshairs7865]

Kubota!! 4 year, 300 hour warranty. But I’m biased!🤫 All you mentioned are top of the line mowers. But don’t buy a mower at a box store ( Hustler) they won’t service or repair it. Good luck!

[@kcimages5157]

Nice mower but not easy to even see the pumps , also why a beacon ? lol

[@chevyon37s]

Our Kawasaki engine in our x475 is been a pile of shit. Stalls in think grass, doesn't start for shit when it's below 60* or above 80* and it stalls out when you've been mowing for an hour and it gets hot.

[@woofy548]

Drew w you have carb issues. Not the motor's fault

[@northwindl]

ya gotta be smarter than the machine.

[@luismartinez-sp5hy]

So the tweels are good at first but after a while the machine will start cutting uneven because it starts to lean to one side even on using them every day

[@CJPhillips6648]

JOHN DEERE makes the best mower!

[@ShotgunHunter101]

I prefer the regular tires and if you want a smoother ride lower your rear tire PSI by 2-3 psi and get front tires that take air. It’s 20% smoother riding and it’ll save you $800

[@dhix2388]

well for comfort get the up grade suspenson seat cheaper

[@texashunter3597]

Where can I find the bumper. I purchased the e915e?

[@BradTate]

Where did you get the floor mat? Can you provide a link, please? My local JD dealer doesn't carry them and all I can find online don't fit the commercial 900 series.

[@jdtractor7525]

I’ll look for the part #. Since this is a commercial 900 series mower, that’s the one I used. Are you looking for one on a residential mower?

[@BradTate]

No sir -- looking for one for a z930M. I just realized there was a typo in my original reply -- I edited that.

[@jdtractor7525]

Try this link: www.greenpartstore.com/John-Deere-Rubber-Floor-Mat-LP1400.html I'm also having a hard time finding the part through Deere. When I ordered from my dealer, nobody even knew this part existed. The only number I found was LP1400. The floor mat in the link should work on a z930m. Hope this helped.

[@jamesnagle2226]

JD, Do you have the 54 inch deck? Any issues with wet or dam grass? Thanks

[@jdtractor7525]

Yeah it's the 54". I have a video that just came out mowing super tall wet grass. My only complaint is that after mowing a super wet yard, I need to get under the deck and clean it out, but that's with any mower. As far as cut quality goes it does well.

[@jacobhevener6710]

The z915e can have tweels. I bought two John Deere zeroturns the 915e with Koehler engine, and the 920m with a Kawasaki and the Kawasaki runs a lot better and and smoother. Also the 915e can't come with run flats on the front but you can have them foam filled which is what I did.

[@jdtractor7525]

Oh ok. Thanks for the correction.

[@mikehornsby599]

That's the same mower I have it great

[@glennguerra]

Where did you get the amber light ?

[@scottweber3328]

How much is the chute blocker?

[@wacojohn4793]

How much does the mower cost

[@jacobisakson4216]

How did you even get enough money to buy that zero turn? What did you do and how long did it take to get the money?

[@jdtractor7525]

Make sure you have a steady income, and finance the mower. I used John Deere financial and it is really reasonable.

[@jacobisakson4216]

K thanks man

[@fz10rider47]

A LOT of people say the tweels ride rougher.

[@jacobwood9227]

I got one that has 1200hr on it's a 23hp gas ztrack

[@kirkjackson8073]

Does it have grease fittings and if so how many and where are they located?

[@jdtractor7525]

1 on each blade spindle, and 1 on each front castor. That's all I know of

[@DC9Douglas]

Dang only 5-7 grease fittings on that deere. My Walkers have 21ish on the tractor and another 18 on the deck. Maintenance takes awhile lol

[@tdmjason]

ILL TAKE A KOHLER AND KAWASAKI OVER A BRIGGS ANYDAY - IF HONDA EVER STARTED MAKING AN AFFORDABLE ENGINE FOR THESE MOWERS THEN YOU WOULD HAVE AN UNSTOPPABLE COMBINATION

[@bms2550]

jet boater WONDER WHY HONDA HASN’T GOTTEN INTO THE MARKET OF RIDING MOWERS...🤔

[@joescheller6680]

the whole mowere is a very expensive option

[@americanforever1603]

JD how many inches is your deck

[@jdtractor7525]

54"

[@americanforever1603]

Thanks I watch all your video I just buy a John Deere can you let me know how wide is your tire My deck is 48 inches and I don’t know if they are going to fit because of my deck thanks

[@StanWilhite]

Shouldn't be engaging/disengaging deck at WOT. You'll wear the clutch/brake out prematurely. Engage as close to idle as possible and disengage at absolute idle so you don't wear the blade brake (that stops the blades for safety) out prematurely. Why would it make sense to do it any other way? Mechanic's just blowing your question off....trust me.

[@anthonyclt]

RE: Throttle position when engaging blades. Prior to purchasing my 930 I had always been told to engage my deck/blades at a low throttle position (and usually when not moving). In fact, that's exactly what I was instructed to do with my Exmark and Husqvarna. When researching for a recent purchase I was also instructed to engage blades at no higher than 1/2 throttle by the local Kubota dealer. In fact, low throttle was recommended. HOWEVER, when taking a Z930M for a test drive/cut, I was instructed to engage blades at full-throttle. Apparently John Deere commercial ZTraks have something called a "soft clutch", or something like that. Anyhow, the first time I engaged the blades (at full-throttle) you could definitely tell something was preventing the clutch from immediately engaging - it was very smooth. Prior to purchasing I did contact several other dealers just to make sure that info was correct - and all three (two in NC, one in CO - just for the hell of it) told me the same thing. So, if this information is incorrect, it's being perpetuated by Deere dealers in different parts of the country. Anyhow, bought a Z930M (non-MOD deck). 24 hours later, couldn't be happier.

[@StanWilhite]

Nope, my mistake, didn't know these mowers had a "slow engage" clutch. That's great....much better on belts/pulleys!

[@jdtractor7525]

Yeah, different brands have different instructions, and it creates confusion. I'll be making a video to address clutch engage/disengage.

[@milestownchurchofchristmil9455]

U always mowe full throttle better blade speed doesn’t lug the motor down trans etc

[@robertkeel3336]

A lot of manufacturers recommend turning the blades on at half throttle and the once the blades engage you go to full throttle. Then when you go to turn them off you go back to half throttle and the disengage the blades. JD has it setup different for some reason.

[@nickc2708]

V ride all day, any day..

[@glennguerra]

I work with the DOT and I need a light like that to put on my mower

[@jdtractor7525]

I ordered it through my Deere dealership. It's a kit with the light and wiring harness. The part number is LP40112

[@glennguerra]

JD Tractor ok thanks

[@brandonmurphy8837]

my z950 doesn't have the rubber floor mat . wish it did

[@kbc74747]

It’s an option, your dealer can set you up with one.

[@MatHelm]

Thumbs down for not giving an actual Dollar figure on the tires... $322.99 each

[@illuminatedcrosshairs7865]

That’s freaking ridiculous! They are not worth that much! No way!

[@JorgeFMaltos]

where?? can you give me a link please highly appreciate it

[@tomjones4318]

I'd have to see the process making them and know how long they last before I decided they were not worth it. Nice to know they ride much better. If they become popular the price will likely come down.

[@clayboist]

How much does that model cost?

[@tonylopresto1615]

I looked at one today. It about $9500

[@stevesmith-wc2gb]

Couldn't you get duel fuel tanks on that mower

[@jdtractor7525]

not that I know of

[@anthonyclt]

You are correct. For some reason I think it has a duel tank, but you only fill on one side. I say this because there is no way I can see the one side holding 11/12 gal. To get the same capacity on the Husq and Exmark you have to use duel tanks.

[@atlbraveswin00]

It holds 11 gallons.

[@woofy548]

How much land do you mow?

[@jdtractor7525]

It changes every week it seems. Depending on how many clients I have it's between 4-10 acres a week I'd say. Many of the yards are small or have lots of obstacles.

[@jameslyons158]

JD Tractor I just bought a 6 acre lot that has a barn, house and a few trees otherwise mostly a clear lot, should I go with a 60" or 72" deck? Also realistically how long would it take me to just cut the grass?

[@mikeadler434]

👍👍

[@tlf2006]

super nice

[@husq48]

I've blown three Kaw's, have better luck with Kohler's.

[@FrostyTheSnowman12321]

All you gotta do is change the oil and filters and they last a LIFETIME! You must be Lazy and don’t like Maintaining Your Equipment! Not KAWI’s Fault! I’ve had FAR MORE KAWI’s than you can even count and have had ONE ☝🏽 issue back in late 90’s but that Mower had MANY HOURS on it!

[@husq48]

@@FrostyTheSnowman12321 🤣

[@georgek3600]

Kubota has about the same thing for raising amd lowering the deck.

[@nuancolar7304]

Those wheels look a little delicate for my tastes. What's the LONG TERM story on these?

[@bluebird5100]

Why a john Deere over a Ferris? Would a ferris ride smoother with the suspension ? I see more and more ferris around where I live.

[@jacobisakson4216]

Cool

[@Futurebeefcake]

Dang that mower looks extremely expensive.

[@joedellinger9437]

And you would be right

[@hilham89]

To be honest they are useful not to get a flat but unless you run the no flat front wheels then they tweels are useless really but that's not your case here. Kawasaki motor all the way man. Only way to go

[@jaxturner7288]

hilham 89 The rears are much more likely to get punctured, saying they are “useless “ without matching fronts is moronic. The fronts are available as a solid rubber unit and if the rears leak down then you mow, you risk damage to the hydro units. So the rears are critical compared to the fronts, about the opposite of your “useless “.

[@jaimecunningham1057]

It's funny to listen to a homeowner do a mower review, that being said it looks like a nice machine for homeowner use. Commercial use cutting 200 homes weekly on avg would be a different story.

[@wh8085]

Must be little yards or you are using more than one mower . And that 920 is as commercial capable as any mower on the market .

[@FrostyTheSnowman12321]

^^^^ this guy has a little pecker 🤏 and is MAD he can’t AFFORD one! In his BEATER {clunker} car!

[@dylanowens5036]

There is no way the plastic will last

[@rvadventures]

These wheels are a waste of money, because of how they're built you'll slide on a average slope, they wear fast, they break off in pieces, the tweel part with crack, they say they'll last 3 times as long, my John Deere z920m. 2016 just had it's original wheels replaced, running 150 residential and 15 large commercial accounts. Don't buy into the hype of these junk $1200 wheels

[@ronwilder6929]

Dc Lawn Services inc, Just bought a brand new z930m, I almost upgraded to the tweel. I think they look really cool and looking at the design they should hold better. Just using the mower on my residence I couldn’t justify paying that much. Doesn’t sound cost effective for commercial either.

[@edjames4535]

Nice tractor I bet you paid at least 5000

[@CumminsCat]

Ed James the 915E is $7200 so I'm sure he's more into that 920M.

[@FrostyTheSnowman12321]

Dude Great Dane Chariots we’re $5,000 when they came out 20 years ago 🥱

[@archieanderson4688]

Bellissima😍😚

[@STEVENRAY18]

If you run that mower Full Throttle when you engage the blades you will cut the life of the clutch down a significant amount the motor needs to be at a idle whenever you engage the blades

[@raymondj8768]

dont wast your money on that green painted crap i bought a bad boy made in the USA and its a tank thick decks square tube built a real bad ass ! and it was half the price

[@jdtractor7525]

I bought this mower also based on the warranty and my dealer support. The only place that sells badboy mowers in my area is Tractor Supply. No supporting dealers within HOURS of me! Besides, if I didn't get a Deere, I would have bought an Exmark

[@suavez.productions9354]

Nothing runs like a deer sir, I just demoed one and it’s a beast

[@jdtractor7525]

Amen brother!

[@Kushert]

Hahaha a badboy..lol. You jokin

[@johnnyteague3407]

I can go to my jd dealership and have a part today or tomorrow at latest ....can your bad boy dealer say that....running jd commercial ztrs since 2006

[@chrismckinney1849]

Drive

[@flyingdog1498]

Those wheels get no better traction than the standard turn tires. Chevron type tire on a Ferris is the best option. Fuck John Deere. The Kawasaki engine sucks.

[@FrostyTheSnowman12321]

Your Momma Sucks 🐓 🍭 Too But We Keep Her Around Like a House Pet. . .

[@bharrison1633]

Lol i can shave with my blades

[@sallylilienthal8835]

I lost interest when you talked about " scraping out the deck". I am a 66 yr. old female that is done driving a mower up on ramps, laying on my back, reaching where I can't see, to clean the deck.

[@FrostyTheSnowman12321]

Ceramic Coat the under-belly of the deck. Problem Solved.

[@michaelc.6306]

Go EXMARK + KAWASAKI DUDE! NOT into JD.

[@FrostyTheSnowman12321]

It’s cause you’re a Ex Fan Boy, and that’s OKAY 👍🏽👌🏽 . . . We all have our Preferences 🌈